Kenjiro Terada
profile
Original Papers
  1. Se-Yun Kim, Donghwi Eum, Hoonhee Lee, Kyoungsoo Park, Kenjiro Terada, Tong-Seok Han:

    Evaluating tensile strength of cement paste using multiscale modeling and in-situ splitting tests with micro-CT

    Construction and Building Materials, Volume 411, 12 January 2024, 134642

    DOI: https://doi.org/10.1016/j.conbuildmat.2023.134642

  2. Riichi Sugai, Jike Han, Shuji Moriguchi and Kenjiro Terada:

    Diffusive-discrete crack transition without remeshing achieved by extended B-spline-based implicit material point method

    Computer Methods in Applied Mechanics and Engineering, Volume 421, 1 March 2024, 116771

    DOI: 10.1016/j.cma.2024.116771

  3. Junsen Xiao, Shuji Moriguchi, Yu Otake and Kenjiro Terada:

    Quantification of the contribution ratio of relevant input parameters on DEM-based granular flow simulations

    Soils and Foundations, Volume 63, Issue 6, December 2023, 101378

    DOI: 10.1016/j.sandf.2023.101378

  4. Jike Han, Daigo Hirayama, Yuichi Shintaku, Shuji Moriguchi and Kenjiro Terada:

    Crack phase-field enhanced finite cover method for dynamic fracture at finite strain

    International Journal for Numerical Method in Engineering, Volume 125, Issue 2, 30 January 2024, e7371, (First published: 17 October 2023)

    DOI: 10.1002/nme.7371

  5. Shaoyuan Pan, Reika Nomura, Guoming Ling, Shinsuke Takase, Shuji Moriguchi and Kenjiro Terada:

    Variable passing method for combining 3D MPM-FEM hybrid and 2D shallow water simulations of landslide-induced tsunamis

    International Journal for NUMERICAL METHODS IN FLUIDS, Volume 96, Issue1, January 2024, Pages 17-43 (First published: 30 August 2023)

    DOI: 10.1002/fld.5233

  6. Zhenduo Yao, Masaki Omiya, Ninshu Ma, Shinnosuke Nishi, Kenji Takada, Kazuaki Okato, Kai Oide, Takaya Kobayashi, Jike Han and Kenjiro Terada:

    Local mechanical characterization and fracture prediction modeling for resistance spot-welded joints of advanced high-strength steel

    Materialstoday COMMUNICATIONS, Volume 36, August 2023, 106787

    DOI: https://doi.org/10.1016/j.mtcomm.2023.106787

  7. Reika Nomura, Shinsuke Takase, Shuji Moriguchi and Kenjiro Terada:

    On the flow conditions requiring detailed geometric modeling for multiscale evaluation of coastal forests

    Advanced Modeling and Simulation in Engineering sciences, 10, Article number: 13 (2023)(Published: 24 August 2023)

    DOI: 10.1186/s40323-023-00250-2

  8. Yosuke Yamanaka, Seishiro Matsubara, Norio Hirayama, Shuji Moriguchi and Kenjiro Terada:

    Surrogate modeling for the homogenization of elastoplastic composites based on RBF interpolation

    Computer Methods in Applied Mechanics and Engineering, Volume 415, 1 October 2023, 116282

    DOI: 10.1016/j.cma.2023.116282

  9. Naoko Kosaka, Shunichi Koshimura, Kenjiro Terada, Yoichi Murashima, Tsuneko Kura, Akira Koyama and Hiroshi Matsubara:

    Decision-making support utilizing real-time tsunami inundation and damage forecast

    International journal of Disaster Risk Reduction, Volume 94, August 2023,103807

    DOI: 10.1016/j.ijdrr.2023.103807

  10. Nilo Lemuel J. Dolojan, Shuji Moriguchi, Masakazu Hashimoto, Nguyen Xuan Tinh, Hitoshi Tanaka and Kenjiro Terada:

    Hydrologic-geotechnical modelling of shallow Landslide and flood hazards caused by heavy rainfall

    Engineering Geology, Volume 323, 20 September 2023, 107184

    DOI: 10.1016/j.enggeo.2023.107184

  11. Kenta Tozato, Shuji Moriguchi, Shinsuke Takase, Yu Otake, Michael R. Motley, Anawat Suppasri and Kenjiro Terada :

    Optimal probabilistic placement of facilities using a surrogate model for 3D tsunami simulations

    Natural Hazards and Earth System Sciences, NHESS-2022-208

    DOI: 10.5194/nhess-2022-208

  12. Riichi Sugai, Jike Han, Yuya Yamaguchi, Shuji Moriguchi and Kenjiro Terada:

    Extended B-spline-based implicit material point method enhanced by F-bar projection method to suppress pressure oscillation

    International Journal for Numerical Method in Engineering, Volume 124, Issue 11, 15 June 2023, pages 2423-2448 (First published: 30 January 2023)

    DOI: 10.1002/nme.7216

  13. Yuichi Shintaku, Fumitoshi Nakamura and Kenjiro Terada:

    A hybrid strategy blending primal-dual interior point and return mapping methods for a class of hypoelastic-plastic models with memory surface

    Internastional Journal for Numerical Method in Engineering, Volume 124, Issue 9, 15 May 2023, Pages 1991-2013 (First published: 28 December 2022)

    DOI: 10.1002/nme.7195

  14. Jike Han, Seishiro Matsubara, Shinnosuke Nishi, Kenji Takada, Mayu Muramatsu, Masaki Omiya, Kensuke Ogawa, Kai Oide, Takaya Kobayashi, Masanobu Murata, Shuji Moriguchi and Kenjiro Terada:

    Gradient damage model for ductile fracture introducing degradation of damage hardening modulus: implementation and experimental investigations

    International Journal of Fracture, 240, 183-208(2023) (Published: 06 December 2022)

    DOI: 10.1007/s10704-022-00681-9

  15. Yosuke Yamanaka, Seishiro Matsubara, Shuji Moriguchi and Kenjiro Terada:

    A method of fully implicit coupled analyses for thermoset resin subjected to cure based on variationally consistent formulation for finite thermo-viscoelasticity

    International Journal of Solid and Structures, Volume 268, 15 April 2023, 112161

    DOI: 10.1016/j.ijsolstr.2023.112161

  16. Jike Han, Yuichi Shintaku, Shuji Moriguchi and Kenjiro Terada:

    A transition scheme from diffusive to discrete crack toSologies at finite strain during the course of a staggered iterative procedure

    International Journal for Numerical Method in Engineering, Volume 124, Issue 6, 30 March 2023, pages 1405-1433 (First published: 09 November 2022)

    DOI: 10.1002/nme.7169

  17. Hasuka Kanno, Shuji Moriguchi, Yuto Tsuda, Ikumasa Yoshida, Shoji Iwanaga and Kenjiro Terada:

    A method for rockfall risk quantification and optimal arrangement of protection structures along a road

    Engineering Geology, Volume 314, 5 March 2023, 107004

    DOI: 10.1016/j.enggeo.2023.107004

  18. Kenta Tozato, Nilo Lemuel J. Dolojan, Yoshiya Touge, Shuichi Kure, Shuji Moriguchi, Seiki Kawagoe, So Kazama and Kenjiro Terada:

    Limit equilibrium method-based 3D slope stability analysis for wide area considering influence of rainfall

    Engineering Geology, Volume 308, October 2022, 106808

    DOI: 10.1016/j.enggeo.2022.106808

  19. D. Watanabe, S. Moriguchi and K. Terada:

    A numerical study on the effects of particle size distribution on run-out distance of granular flow

    Soils and Foundations, Volume 62, Issue 6, December 2022, 101242

    DOI: 10.1016/j.sandf.2022.101242

  20. Reika Nomura, Saneiki Fujita, Joseph M. Galbreath, Yu Otake, Shuji Moriguchi, Shunichi Koshimura, Randall J. LeVeque and Kenjiro Terada:

    Sequential Bayesian Update to Detect the Most Likely Tsunami Scenario Using Observational Wave Sequences

    Journal of Geophysical Research: Oceans, Volume 127, Issue 10, October 2022, e2021JC018324 (First published: 05 October 2022)

    DOI: 10.1029/2021JC018324

  21. Donsub Rim, Robert Baraldi, Christopher M. Liu, Randall J. LeVeque and Kenjiro Terada:

    Tsunami Early Warning From Global Navigation Satellite System Data Using Convolutional Neural Networks

    Geophysical Research Letters, Volume 49, Issue 20, 28 October 2022, e2022GL099511 (First published: 17 October 2022)

    DOI: 10.1029/2022GL099511

  22. Jike Han, Seishiro Matsubara, Shuji Moriguchi and Kenjiro Terada:

    Variational crack phase-field model for ductile fracture with elastic and plastic damage variables

    Computer Methods in Applied Mechanics and Engineering, Volume 400, 1 October 2022, 115577

    DOI: 10.1016/j.cma.2022.115577

  23. Huachao Deng, Yoshiaki Kawagoe, Yoshiaki Abe, Kenjiro Terada and Tomonaga Okabe:

    Generalized coordinate smoothed particle hydrodynamics with an overset method in total Lagrangian formulation

    International Journal for Numerical Methods in Engineering, Volume 123, Issue 19, 15 October 2022, Pages 4518-4544 (First published: 20 May 2022)

    DOI: 10.1002/nme.7043

  24. Masaki Omiya, Seiya Arakawa, Zhenduo Yao, Mayu Muramatsu, Shinnosuke Nishi, Kenji Takada, Masanobu Murata, Kazuaki Okato, Kensuke Ogawa, Kai Oide, Takaya Kobayashi, Jike Han and Kenjiro Terada:

    Influence of strength and notch shape on crack initiation and propagation behavior of advanced high strength steel sheets

    Engineering Fracture Mechanics, Volume 271, August 2022, 108573

    DOI: 10.1016/j.engfracmech.2022.108573

  25. Naruethep Sukulthanasorn, Hiroya Hoshiba, Koji Nishiguchi, Mao Kurumatani, Robert Fleischhauer, Kuniharu Ushijima, Michael Kaliske, Kenjiro Terada and Junji Kato:

    Two-scale topology optimization for transient heat analysis in porous material considering the size effect of microstructure

    Structural and Multidisciplinary Optimization, 65, Article number: 186 (2022)(publised: 18 June 2022)

    DOI: 10.1007/s00158-022-03257-2

  26. Kenta Tozato, Shinsuke Takase, Shuji Moriguchi, Kenjiro Terada, Yu Otake, Yo Fukutani, Kazuya Nojima, Masaaki Sakuraba and Hiromu Yokosu:

    Rapid tsunami force prediction by mode-decomposition-based surrogate modeling

    Natural Hazard and Earth system sciences, Volume 22, Issue 4, NHESS, 22, 1267-1285, 2022 (11 Apr 2022)

    DOI: 10.5194/nhess-22-1267-2022

  27. Yuichi Shintaku, Seiichiro Tsutsumi and Kenjiro Terada:

    A CDM-like constitutive law for predicting degradation of strength and ductility of steel subjected to cyclic loading

    International Journal of Plasticity, Volume 153, June 2022, 103237

    DOI: 10.1016/J.IJPLAS.2022.103237

  28. Chatuphorn Somphong, Anawat Suppasri, Kwanchai Pakoksung, Tsuyoshi Nagasawa, Yuya Narita, Ryunosuke Tawatari, Shohei Iwai, Yukiko Mabuchi, Saneiki Fujita, Shuji Moriguchi, Kenjiro Terada, Cipta Athanasius and Fumihiko Imamura:

    Submarine landslide source modeling using the 3D slope stability analysis method for the 2018 Palu, Sulawesi, tsunami

    Natural Hazard abd Earth System sciences, Volume 22, Issue 3, NHESS, 22, 891-907, 2022 (17 Mar 2022)

    DOI: 10.5194/nhess-22-891-2022

  29. Jike Han, Seishiro Matsubara, Shuji Moriguchi, Michael Kaliske and Kenjiro Terada:

    Crack phase-field model equipped with plastic driving force and degrading fracture toughness for ductile fracture simulation

    Computational Mechanics, 69, 151-175 (2022)(published: 23 September 2021)

    DOI: 10.1007/s00466-021-02087-1

  30. S. Takarazawa, K. Ushijima, R. Fleischhauer, J. Kato, K. Terada, W. J. Cantwell, M. Kaliske, S. Kagaya and S. Hasumoto:

    Heat-transfer and pressure drop characteristics of micro-lattice materials fabricated by selective laser metal melting technology

    Heat Mass Transfer, 58, 125-141 (2022)(Published: 26 June 2021)

    DOI: 10.1007/s00231-021-03083-0

  31. Reika Nomura, Shinsuke Takase, Shuji Moriguchi, Kenjiro Terada and Randall J. LeVeque:

    Multiscale evaluation method of the drag effect on shallow water flow through coastal forests based on 3D numerical simulations

    International Journal for Numerical Methods in Fluids, Volume 94, Issue 1, January 2022, Pages 32-58 (First published: 20 September 2021)

    DOI: 10.1002/fld.5046

  32. Takeki Yamamoto, Tomonaga Okabe and Kenjiro Terada:

    Numerical simulation for deformation of laminates combining the novel shell element with the decoupled two-scale viscoelastic analysis of FRP

    International Journal of Solid ad Structures, Volume 234-235, January 2022, 111236, 2022

    DOI: 10.1016/j.ijsolstr.2021.111236

  33. Jike Han, Bo Yin, Michael Kaliske and Kenjiro Terada:

    Incorporation of gradient-enhanced microplane damage model into isogeometric analysis

    Engineering Computations, Vol. 38 No. 8, pp. 3388-3415, 2021

    DOI: 10.1108/EC-08-2020-0455

  34. Yo Fukutani, Shuji Moriguchi, Kenjiro Terada and Yu Otake:

    Time-Dependent Probabilistic Tsunami Inundation Assessment Using Mode Decomposition to Assess Uncertainty for an Earthquake Scenario

    Journal of Geophysical Research: Oceans, Volume 126, Issue 7, July 2021, e2021JC017250 (First published: 15 June 2021)

    DOI: 10.1029/2021jc017250

  35. Masami Sato, Mayu Muramatsu, Shinnosuke Nishi, Tatsuya Kawada and Kenjiro Terada:

    Substitution approach for decoupled two-scale analysis of materially nonlinear composite plates

    Computers & Structures, Volume 255, 15 October 2021, 106623

    DOI: 10.1016/J.COMPSTRUC.2021.106623

  36. Shaoyuan Pan, Yuya Yamaguchi, Anawat Suppasri, Shuji Moriguchi and Kenjiro Terada:

    MPM-FEM hybrid method for granular mass-water interaction problems

    Computational Mechanics, 68, 155-173 (2021)(Published: 13 May 2021)

    DOI: 10.1007/s00466-021-02024-2

  37. Nilo Lemuel J. Dolojan, Shuji Moriguchi, Masakazu Hashimoto and Kenjiro Terada:

    Mapping method of rainfall-induced landslide hazards by infiltration and slope stability analysis

    Landslides, 18, 2039-2057 (2021)(Published: 30 January 2021)

    DOI: 10.1007/s10346-020-01617-x

  38. Yuki Kamikawa, Koji Amezawa and Kenjiro Terada:

    Chemomechanical Simulation of LiF-Rich Solid–Electrolyte Interphase Formed from Fluoroethylene Carbonate on a Silicon Anode

    ACS Applied Energy Materials, 2021, 4, 4, 3231-3239 (Publication Date: April 8, 2021)

    DOI: 10.1021/acsaem.0c03014

  39. Hasuka Kanno, Shuji Moriguchi, Shunsuke Hayashi and Kenjiro Terada:

    A computational design optimization method for rockfall protection embankments

    Engineering Geology, Volume 284, April 2021, 105920

    DOI: 10.1016/j.enggeo.2020.105920

  40. Yuya Yamaguchi, Shuji Moriguchi and Kenjiro Terada:

    Extended B-spline-based implicit material point method

    Internattional Journal for Numerical Methods in Engineering, Volume 122, Issue 7, 15 April 2021, Pages 1746-1769 (First published: 04 December 2020)

    DOI: 10.1002/nme.6598

  41. Yuki Kamikawa, Koji Amezawa and Kenjiro Terada:

    Energy-loss near-edge structures and low-loss structures of polymers in a solid electrolyte interface formed from fluoroethylene carbonate on a Si anode clarified by DFT calculations

    The Journal of Physical Chemistry C, 2021, 125, 7, 3890-3900 (Publicatin Date: February 10, 2021)

    DOI: 10.1021/acs.jpcc.0c10204

  42. Yosuke Yamanaka, Seishiro Matsubara, Risa Saito, Shuji Moriguchi and Kenjiro Terada:

    Thermo-mechanical coupled incremental variational formulation for thermosetting resins subjected to curing process

    International Journal of Solid and Structures, Volume 216, 1 May 2021, Pages 30-42

    DOI: 10.1016/j.ijsolstr.2021.01.014

  43. Risa Saito, Yosuke Yamanaka, Seishiro Matsubara, Tomonaga Okabe, Shuji Moriguchi and Kenjiro Terada:

    A decoupling scheme for two-scale finite thermoviscoelasticity with thermal and cure-induced deformations

    Internattional Journal for Numerical Methods in Engineering, Volume 122, Issue 4, 28 February 2021, Pages 1133-1166 (First published: 31 October 2020)

    DOI: 10.1002/nme.6575

  44. Seishiro Matsubara and Kenjiro Terada:

    A variationally consistent formulation of the thermo-mechanically coupled problem with non-associative viscoplasticity for glassy amorphous polymers

    International Journal of Solid and Structures, Volume 212, 1 May 2021, Pages 152-168

    DOI: 10.1016/j.ijsolstr.2020.12.004

  45. T. Kotani, K. Tozato, S. Takase, S. Moriguchi, K. Terada, Y. Fukutani, Y. Otake, K. Nojima, M. Sakuraba and Y. Choe:

    Probabilistic tsunami hazard assessment with simulation-based response surfaces

    Coastal Engineering, Volume 160, September 2020, 103719

    DOI: 10.1016/j.coastaleng.2020.103719

  46. Riccardo Fincato, Seiichiro Tsutsumi, Tatsuo Sakai and Kenjiro Terada:

    3D crystal plasticity analyses on the role of hard/soft inclusions in the local slip formation

    Int. J. Fatigue, Volume 134, May 2020, 105518

    DOI: 10.1016/j.ijfatigue.2020.105518

  47. Elizabeth Maly, Kenjiro Terada, Randall J. LeVeque, Naoko Kuriyama, Daniel B. Abramson, Lan T. Nguyen, Ann Bostrom, Jorge León, Michael Motley, Patricio A. Catalan, Shunichi Koshimura, Shuji Moriguchi, Yuya Yamaguchi, Carrie Garrison-Laney, Anawat Suppasri, Erick Mas:

    Advances of international collaboration on M9 disaster science: scientific session report

    Journal of Disaster Research, Vol. 15, No. 7, pp. 890-899 (2020)(published: december 1, 2020)

    DOI: 10.20965/jdr.2020.p0890

  48. Ryo Hatano, Seishiro Matsubara, Shuji Moriguchi, Kenjiro Terada and Julien Yvonnet:

    \(\text{FE}^r\) method with surrogate localization model for hyperelastic composite materials

    Advanced Modeling and Simulation in Engineering sciences, 7, Article number: 39 (2020)(Published: 06 October 2020)

    DOI: 10.1186/s40323-020-00175-0

  49. Yuki Kamikawa, Koji Amezawa and Kenjiro Terada:

    Elastic-plastic deformation of a solid electrolyte interface formed by reduction of fluoroethylene carbonate: a nanoindentation and finite element analysis study

    The Jounal of Physical Chemistry C, 2020, 124, 41, 22488-22495 (Publication Date: September 17, 2020)

    DOI: 10.1021/acs.jpcc.0c06420

  50. Yuki Kamikawa, Kouji Amezawa and Kenjiro Terada:

    First-principles study on the mechanical properties of polymers formed by the electrochemical reduction of fluoroethylene carbonate and vinylene carbonate

    The Journal of Physical Chemistry C, 2020, 124, 37, 19937-19944 (Publication Date: Augast 21, 2020)

    DOI: 10.1021/acs.jpcc.0c04878

  51. Robert Fleischhauer, Tom Thomas, Junji Kato, Kenjiro Terada and Michael Kaliske:

    Finite thermo-elastic decoupled two-scale analysis

    International Journal for Numerical Methods in Engineering, Volume 121, Issue 3, 15 February 2020, Pages 355-392 (First published: 28 Augast 2019)

    DOI: 10.1002/nme.6212

  52. Seishiro Matsubara, Kenjiro Terada, Ryusei Maeda, Takaya Kobayashi, Masanobu Murata, Takuya Sumiyama, Kenji Furuichi and Chisato Nonomura:

    Viscoelastic-viscoplastic combined constitutive model for glassy amorphous polymers under loading/unloading/no-load states

    Engineering Computations, Volume 37, Issue 5, Pages 1703-1735 (Article publication date: 19 February 2020 Issue publication date: 11 May 2020)

    DOI: 10.1108/EC-05-2019-0197

  53. Shinnosuke Nishi, Takayuki Yamada, Kazuhiro Izui, Shinji Nishiwaki and Kenjiro Terada:

    Isogeometric topology optimization of anisotropic metamaterials for controlling high-frequency electromagnetic wave

    International Journal for Numerical Methods in ENgineering, Volume 121, Issue 6, 30 March 2020, Pages 1218-1247 (First published: 31 October 2019)

    DOI: 10.1002/nme.6263

  54. Risa Saito, Yuya Yamaguchi, Seishiro Matsubara, Shuji Moriguchi, Yasuko Mihara, Takaya Kobayashi and Kenjiro Terada:

    Decoupled two-scale viscoelastic analysis of FRP in consideration of dependence of resin properties on degree of cure

    International Journal of Solid and Structures, Volume 190, 1 May 2020, Pages 199-215

    DOI: 10.1016/j.ijsolstr.2019.11.010

  55. Yuya Yamaguchi, Shinsuke Takase, Shuji Moriguchi and Kenjiro Terada:

    Solid–liquid coupled material point method for simulation of ground collapse with fluidization

    Computational particle Mechanics, 7, 209-223 (2020)(Published: 06 June 2019)

    DOI: 10.1007/s40571-019-00249-w

  56. Berkay Alp Çakal, İlker Temizer, Kenjiro Terada, Junji Kato:

    Microscopic design and optimization of hydrodynamically lubricated dissipative interfaces

    International Journal for Numerical Methods in Engineering, Volume 120, Issue 2, 12 October 2019, Pages 153-178 (Fierst published: 26 May 2019)

    DOI: 10.1002/nme.6129

  57. Yo Fukutani, Shuji Moriguchi, Kenjiro Terada, Takuma Kotani, Yu Otake and Toshikazu Kitano:

    Tsunami hazard and risk assessment for multiple buildings by considering the spatial correlation of wave height using copulas

    Natural Hazard and Earth System Sciences, Volume 19, Issue 11, NHESS, 19, 2619-2634, 22 Nov 2019

    DOI: 10.5194/nhess-19-2619-2019

  58. Mao Kurumatani, Yuto Soma and Kenjiro Terada:

    Simulations of cohesive fracture behavior of reinforced concrete by a fracture-mechanics-based damage model

    Engineering Fracture Mechanics, Volume 206, 1 February 2019, Pages 392-407

    DOI: 10.1016/j.engfracmech.2018.12.006

  59. S. Nishi, K. Terada and I. Temizer:

    Isogeometric analysis for numerical plate testing of dry woven fabrics involving frictional contact at meso-scale

    Computtational Mechanics, Vol. 64, pp. 211-229, 2019

    DOI: 10.1007/s00466-018-1666-6

  60. H. Yokokawa, M. Suzuki, M. Yoda, T. Suto, K. Tomida, K. Hiwatashi, M. Shimazu, A. Kawakami, H. Sumi, M. Ohmori, T. Ryu, N. Mori, M. Iha, S. Yatsuzuka, K. Yamaji, H. Kishimoto, K. Develos‐Bagarinao, T. Shimonosono, K. Sasaki, S. Taniguchi, T. Kawada, M. Muramatsu, K. Terada, K. Eguchi, T. Matsui, H. Iwai, M. Kishimoto, N. Shikazono, Y. Mugikura, T. Yamamoto, M. Yoshikawa, K. Yasumoto, K. Asano, Y. Matsuzaki, K. Sato, T. Somekawa:

    Achievements of NEDO durability projects on SOFC stacks in the light of physicochemical mechanisms

    Fuel Cells, Volume 19, Issue 4, August 2019, Pages 311-339 (First published: 03 June 2019)

    DOI: 10.1002/fuce.201800187

  61. Junji Kato, Daishun Yachi, Takashi Kyoya and Kenjiro Terada:

    Micro-macro concurrent topology optimization for nonlinear solids with a decoupling multiscale analysis

    International Journal for Numerical Mechanics in Engineering, Volume 113, Issue 8, 24 February 2018, Pages 1189-1213 (First published: 20 April 2017)

    DOI: 10.1002/nme.5571

  62. Panon Latcharote, Kenjiro Terada, Muneo Hori and Fumihiko Imamura:

    A prototype seismic loss assessment tool using integrated earthquake simulation

    International journal of Disaster Risk Reduction, Volume 31, October 2018, Pages 1354-1365

    DOI: 10.1016/j.ijdrr.2018.03.026

  63. Mayu Muramatsu, Masami Sato, Kenjiro Terada, Satoshi Watanabe, Keiji Yashiro, Tatsuya Kawada, Fumitada Iguchi and Harumi Yokokawa:

    Shape deformation analysis of anode-supported solid oxide fuel cell by electro-chemo-mechanical simulation

    Solid State Ionics, Volume 319, June 2018, Pages 194-202

    DOI: 10.1016/j.ssi.2018.01.027

  64. M. Muramatsu, K. Yashiro, T. Kawada and K. Terada:

    Simulation of ferroelastic phase formation using phase-field model

    International Journal of Mechanical Sciences, Volume 146-147, October 2018, Pages 462-474

    DOI: 10.1016/j.ijmecsci.2017.12.027

  65. Shinnosuke Nishi, Kenjiro Terada, Junji Kato, Shinji Nishiwaki and Kazuhiro Izui:

    Two-scale topology optimization for composite plates with in-plane periodicity

    International Journal for Numerical Mecthods in Engineering, Volume 113, Issue 8, 24 February 2018, Pages 1164-1188 (First published: 11 March 2017)

    DOI: 10.1002/nme.5545

  66. Seishiro Matsubara, Kenjiro Tarada, Takaya Kobayashi, Toshiyuki Saitou, Manabu Umeda, Yasuko Mihara, Kai Oide, Hiroto Shin and Yasuhiro Katsuda:

    A set of constitutive functions for dried body to predict entire deformation process of ceramic products during firing

    Engineering Computations, Vol. 34, No. 8, pp. 2668-2697, 2017 (Article publication date: 6 November 2017)

    DOI: 10.1108/EC-12-2016-0444

  67. Seishiro Matsubara, Shin-Nosuke Nishi, Kenjiro Terada:

    On the treatments of heterogeneities and periodic boundary conditions for isogeometric homogenization analysis

    International Journal for Numerical Methods in Engineering, Volume 109, Issue 11, 16 March 2017, Pages 1523-1548

    DOI: 10.1002/nme.5328

  68. Mayu Muramatsu, Keiji Yashiro, Tatsuya Kawada and Kenjiro Tarada :

    Numerical simulations of non-stationary distributions of electrochemical potentials in SOFC

    Engineering Computations, Vol. 34, No. 6, pp. 1956-1988, 2017 (Article publication date: 7 August 2017)

    DOI: 10.1108/EC-08-2016-0311

  69. Ikkoh Tachibana, Shuji Moriguchi, Shinsuke Takase, Kenjiro Terada, Takayuki Aoki, Kohji Kamiya and Takeshi Kodaka:

    Characterization of transition from Darcy to non-Darcy flow with 3D pore-level simulations

    Soils and Foundations, Volume 57, Issue 5, October 2017, Pages 707-719

    DOI: 10.1016/j.sandf.2017.08.003

  70. A. Waseem, İ. Temizer, J. Kato, K. Terada:

    Micro-texture design and optimization in hydrodynamic lubrication via two-scale analysis

    Structural and Multidisciplinary Optimization, 56, 227-248 (2017)(Published: 19 May 2017)

    DOI: 10.1007/s00158-017-1713-5

  71. H. Yokokawa, Y. Hori, T. Shigehisa, M. Suzuki, S. Inoue, T. Suto, K. Tomida, M. Shimazu, A. Kawakami, H. Sumi, M. Ohmori, N. Mori, T. Iha, K. Yamaji, H. Kishimoto, K. Develos‐Bagarinao, K. Sasaki, S. Taniguchi, T. Kawada, M. Muramatsu, K. Terada, K. Eguchi, T. Matsui, H. Iwai, M. Kishimoto, N. Shikazono, Y. Mugikura, T. Yamamoto, M. Yoshikawa, K. Yasumoto, K. Asano, Y. Matsuzaki, S. Amaha, T. Somekawa:

    Recent achievements of NEDO durability project with an emphasis on correlation between cathode overpotential and ohmic loss

    Fuel Cells, Volume 17, Issue 4, Special Issue: 12th European SOFC & SOE Forum, August 2017, Pages 473-497 (First published: 17 May 2017)

    DOI: 10.1002/fuce.201600186

  72. Harumi Yokokawa, Haruo Kishimoto, Taro Shimonosono, Katsuhiko Yamaji, Mayu Muramatsu, Kenjiro Terada, Keiji Yashiro and Tatsuya Kawada:

    Simulation technology on SOFC durability with an emphasis on conductivity degradation of ZrO2-base electrolyte

    Journal of Electrochemical Energy Conversion and Storage, Volume 14, Issue 1, 011004 (19 Pages), February 2017

    DOI: 10.1115/1.4036038

  73. Mao Kurumatani, Kenjiro Terada, Junji Kato, Takashi Kyoya and Kazuo Kashiyama:

    An isotropic damage model based on fracture mechanics for concrete

    Engineering Fracture Mechanics, Volume 155, April 2016, Pages 49-66

    DOI: 10.1016/j.engfracmech.2016.01.020

  74. S. Takase, S. Moriguchi, K. Terada, J. Kato, T. Kyoya, K. Kashiyama and T. Kotani:

    2D–3D hybrid stabilized finite element method for tsunami runup simulations

    Computational Mechanics, 58, 3, 411-422 (2016)(Published: 21 May 2016)

    DOI: 10.1007/s00466-016-1300-4

  75. Kenjiro Terada, Norio Hirayama, Koji Yamamoto, Mayu Muramatsu, Seishiro Matsubara, Shin-nosuke Nishi:

    Numerical plate testing for linear two-scale analyses of composite plates with in-plane periodicity

    International Journal for Numerical Methods in Engineering, Volume 105, Issue 2, 13 January 2016, Pages 111-137 (First published: 12 June 2015)

    DOI: 10.1002/nme.4970

  76. A. Waseem, İ. Temizer, J. Kato, K. Terada:

    Homogenization-based design of surface textures in hydrodynamic lubrication

    International Journal for Numerical Methods in Engineering, Volume 108, Issue 12, 21 December 2016, Pages 1427-1450 (First published: 15 March 2016)

    DOI: 10.1002/nme.5256

  77. Junji Kato, Hiroya Hoshiba, Shinsuke Takase, Kenjiro Terada and Takashi Kyoya:

    Analytical sensitivity in topology optimization for elastoplastic composites

    Structural and Multidisciplinary Optimization, 52, 507-526 (2015))(Published: 15 May 2015)

    DOI: 10.1007/s00158-015-1246-8

  78. M. Muramatsu, K. Terada, T. Kawada, K. Yashiro, K. Takahashi and S. Takase:

    Characterization of time-varying macroscopic electro-chemo-mechanical behavior of SOFC subjected to Ni-sintering in cermet microstructures

    Compututational Mechanics, 56, 653-676 (2015)(Published: 15 August 2015)

    DOI: 10.1007/s00466-015-1193-7

  79. Junji Kato, Keiichiro Ishii, Kenjiro Terada and Takashi Kyoya:

    Layout design of rockbolts for natural ground reinforcement

    International Journal for Numerical and Analytical Methods in Geomechanics, Volume 38, Issue 3, 25 February 2014, Pages 236-255 (First published: 05 July 2013)

    DOI: 10.1002/nag.2202

  80. Junji Kato, Daishun Yachi, Kenjiro Terada and Takashi Kyoya:

    Topology optimization of micro-structure for composites applying a decoupling multi-scale analysis

    Structural and Multidisciplinary Optimizatino, 49, 595-608 (2014)(Published: 13 September 2013)

    DOI: 10.1007/s00158-013-0994-6

  81. Kenjiro Terada, Norio Hirayama, Koji Yamamoto, Junji Kato, Takashi Kyoya, Seishiro Matsubara, Yusuke Arakawa, Yuta Ueno and Naohiro Miyanaga:

    Applicability of micro–macro decoupling scheme to two-scale analysis of fiber-reinforced plastics

    Advanced Composite Materials, Volume 23, Issue 5-6, Pages 421-450, 2014

    DOI: 10.1080/09243046.2014.915098

  82. K. Terada, J. Kato, N. Hirayama, T. Inugai and K. Yamamoto:

    A method of two-scale analysis with micro-macro decoupling scheme: application to hyperelastic composite materials

    Computational Mechanics, 52, 1199-1219 (2013)(Published: 21 May 2013)

    DOI: 10.1007/s00466-013-0872-5

  83. Kazuyuki Nakahata, Kenjiro Terada, Takashi Kyoya, Makoto Tsukino and Keizo Ishii:

    Simulation of ultrasonic and electromagnetic wave propagation for nondestructive testing of concrete using image-based FIT

    Journal of Computational Science and Technology, Volume 6, Issue 1, Pages 28-37, 2012

    DOI: 10.1299/jcst.6.28

  84. Mao Kurumatani and Kenjiro Terada:

    A method of global-local analyses of structures involving local heterogeneities and propagating cracks

    Structural Engineering and Mechanics, Volume 38, Issue 4, Pages 529-547, 2011

    DOI: 10.12989/sem.2011.38.4.529

  85. T. Yamamoto, S. Maruyama, K. Terada, K. Izui and S. Nishiwaki:

    A generalized macroscopic model for sound-absorbing poroelastic media using the homogenization method

    Computer Methods in Applied Mechanics and Engineering, Volume 200, Issue 1-4, Pages 251-264, 2011

    DOI: 10.1016/j.cma.2010.08.009

  86. Shigenobu Okazawa, Hideyuki Terasawa, Mao Kurumatani, Kenjiro Terada and Kazuo Kashiyama:

    Eulerian finite cover method for solid dynamics

    International Journal of Computational Methods, Vol. 07, No. 01, pp. 33-54 (2010)

    DOI: 10.1142/S0219876210002052

  87. K. Terada, M. Kurumatani, T. Ushida and N. Kikuchi:

    A method of two-scale thermo-mechanical analysis for porous solids with micro-scale heat transfer

    Computational Mechanics, 46, 269-285 (2010)(Published:12 June 2009)

    DOI: 10.1007/s00466-009-0400-9

  88. Kenjiro Terada and Mao Kurumatani:

    Two-scale diffusion–deformation coupling model for material deterioration involving micro-crack propagation

    Internatinal Journal for Numerical Methods in Engineering, Volume 83, Issue 4, 23 July 2010, Pages 426-451 (First published: 08 July 2010)

    DOI: 10.1002/nme.2835

  89. I. Watanabe and K. Terada:

    A method of predicting macroscopic yield strength of polycrystalline metals subjected to plastic forming by micro–macro de-coupling scheme

    International Journal of Mechanical Sciences, Volume 52, Issue 2, February 2010, Pages 343-355

    DOI: 10.1016/j.ijmecsci.2009.10.006

  90. Mao Kurumatani and Kenjiro Terada:

    Finite cover method with multi-cover layers for the analysis of evolving discontinuities in heterogeneous media

    International Journal for Numerical Methods in Engineering, Volume 79, Issue 1, 2 July 2009, Pages 1-24 (First published: 22 January 2009)

    DOI: 10.1002/nme.2545

  91. Tatsuya Kawada, Satoshi Watanabe, Shin-ichi Hashimoto, Tadashi Sakamoto, Atsushi Unemoto, Mao Kurumatani, Kazuhisa Sato, Fumitada Iguchi, Keiji Yashiro, Koji Amezawa, Kenjiro Terada, Momoji Kubo, Hiroo Yugami, Toshiyuki Hashida, Junichiro Mizusaki:

    Classification of mechanical failure in SOFC and strategy for evaluation of operational margin

    ECS Transactions, Volume 25, No. 2, Pages 467, 2009

    DOI: 10.1149/1.3205556

  92. Ikumu Watanabe, Kenjiro Terada, Eduardo Alberto de Souza Neto, Djordje Perić:

    Characterization of macroscopic tensile strength of polycrystalline metals with two-scale finite element analysis

    Journal of thw Mechanics and Physics of Solids, Volume 56, Issue 3, March 2008, Pages 1105-1125

    DOI: 10.1016/j.jmps.2007.06.001

  93. Shinji Nishiwaki, Yasunori Maeda, Kazuhiro Izui, Masataka Yoshimura, Kazumi Matsui and Kenjiro Terada:

    Topology optimization of mechanical structures targeting vibration characteristics

    Journal of Environment and Engineering, Volume 2, Issue 3, Pages 480-492, 2007

    DOI: 10.1299/jee.2.480

  94. K. Terada and I. Watanabe:

    Computational aspects of tangent moduli tensors in rate-independent crystal elastoplasticity

    Computational Mechanics, 40, 497-511 (2007)(Published: 10 October 2006)

    DOI: 10.1007/s00466-006-0123-0

  95. K. Terada, A. Maruyama and M. Kurumatani:

    Eulerian finite cover method for quasi-static equilibrium problems of hyperelastic bodies

    International Journal of Numerical Methods in Biomedical Engineering, Volume 23, Issue 12, December 2007, Pages 1081-1094 (First published: 03 November 2006)

    DOI: 10.1002/cnm.948

  96. K. Terada, T. Ishii, T. Kyoya and Y. Kishino:

    Finite cover method for progressive failure with cohesive zone fracture in heterogeneous solids and structures

    Computational Mechanics, 39, 191-210 (2007)(Published: 09 December 2005)

    DOI: 10.1007/s00466-005-0017-6

  97. Tateki Ishii, Kenjiro Terada and Takashi Kyoya:

    Failure analysis of quasi-brittle materials involving multiple mechanisms on fractured surfaces

    International Journal for Numerical Methods in Engineering, Volume 67, Issue 7, 13 August 2006, Pages 960-988 (First published: 13 February 2006)

    DOI: 10.1002/nme.1656

  98. Y. Maeda, S. Nishiwaki, K. Izui, M. Yoshimura, K. Matsui and K. Terada:

    Structural topology optimization of vibrating structures with specified eigenfrequencies and eigenmode shapes

    International Journal for Numerical Methods in Engineering, Volume 67, Issue 5, 30 July 2006, Pages 597-628 (First published: 06 February 2006)

    DOI: 10.1002/nme.1626

  99. Isao Saiki, Ken Ooue, Kenjiro Terada and Akinori Nakajima:

    Multiscale modeling for planar lattice microstructures with structural elements

    International Journal for Multiscale Computational Engineering, Volume 4, Issue 4, pp. 429-444, 2006

    DOI: 10.1615/IntJMultCompEng.v4.i4.20

  100. Kenjiro Terada, Ikumu Watanabe and Masayoshi Akiyama:

    Effects of shape and size of crystal grains on the strengths of polycrystalline metals

    International Journal for Multiscale Computational Engineering, Voume 4, Issue 4, pp. 445-460, 2006

    DOI: 10.1615/IntJMultCompEng.v4.i4.30

  101. M. Akiyama, Y. Neishi, A. Taniyama and K. Terada:

    Direct observation of microscopic plastic deformation of stainless steel using lattice drawn by focused ion beam of Ga+

    Material Science and Technology, Volume 21, Issue 3, Pages 274-280, 2005

    DOI: 10.1179/174328405X27089

  102. M. Kurumatani and K. Terada:

    Finite cover method with mortar elements for elastoplasticity problems

    Computational Mechanics, Vol. 36,pp. 45-61, 2005

    DOI: 10.1007/s00466-004-0641-6

  103. Kenjiro Terada and Mao Kurumatani:

    An integrated procedure for three-dimensional structural analysis with the finite cover method

    International Journal for Numerical Methods in Engineering, Volume 63, Issue 15, 21 August 2005, Pages 2102-2123

    DOI: 10.1002/nme.1356

  104. Ikumu Watanabe, Kenjiro Terada and Masayoshi Akiyama:

    Two-scale analysis for deformation-induced anisotropy of polycrystalline metals

    Computational Materials Science, Volume 32, Issue 2, February 2005, Pages 240-250

    DOI: 10.1016/j.commatsci.2004.08.002

  105. K. Matsui and K. Terada:

    Continuous approximation of material distribution for topology optimization

    International Journal for Numerical Methods in Engineering, Volume 59, Issue 14, 14 April 2004, Pages 1925-1944 (First published: 16 March 2004)

    DOI: 10.1002/nme.945

  106. Kazumi Matsui, Kenjiro Terada and Kohei Yuge:

    Two-scale finite element analysis of heterogeneous solids with periodic microstructures

    Computers & Structures, Volume 82, Issue 7, March 2004, Pages 593-606

    DOI: 10.1016/j.compstruc.2004.01.004

  107. Kenjiro Terada, Kazumi Matsui, Masayoshi Akiyama and Takashi Kuboki:

    Numerical re-examination of the micro-scale mechanism of the Bauschinger effect in carbon steels

    Computational Materials Science, Volume 31, Issues 1-2, September 2004, Pages 67-83

    DOI: 10.1016/j.commatsci.2004.01.037

  108. Kenjiro Terada and Mao Kurumatani:

    Performance assessment of generalized elements in the finite cover method

    Finite Elements in Analysis and Design, Volume 41, Issue 2, Nobember 2004, Pages 111-132

    DOI: 10.1016/j.finel.2004.05.001

  109. K. Kaneko, K. Terada, T. Kyoya and Y. Kishino:

    Global–local analysis of granular media in quasi-static equilibrium

    Int. J. Solids Struct., Vol. 40, No. 15, pp. 4043-4069, 2003

    DOI: 10.1016/S0020-7683(03)00209-9

  110. Kenjiro Terada, Mitsuteru Asai and Michihiro Yamagishi:

    Finite cover method for linear and non-linear analyses of heterogeneous solids

    International Journal for Numerical Methods in Engineering, Volume 58, Issue 9, 7 November 2003, Pages 1321-1346 (First published: 12 August 2003)

    DOI: 10.1002/nme.820

  111. Masayoshi Akiyama, Yutaka Neishi, Yoshitaka Adachi and Kenjiro Terada:

    Trigger for the occurrence of grain coarsening phenomenon of BS304S31 austenite stainless steel under small plastic strain at high temperature

    Engineering Computations, Vol. 20, No. 5/6, pp. 499-512, 2003 (Article publication date 1 August 2003)

    DOI: 10.1108/02644400310488736

  112. K. Terada, I. Saiki, K. Matsui and Y. Yamakawa:

    Two-scale kinematics and linearization for simultaneous two-scale analysis of periodic heterogeneous solids at finite strain

    Computer Methods in Applied Mechanics and Engineering, Volume 192, Issues 31-32, 1 August 2003, Pages 3531-3563

    DOI: 10.1016/S0045-7825(03)00365-7

  113. M. Akiyama, T. Kuboki, K. Oikawa, K. Matsui and K. Terada:

    Influence of carbon content and carbide morphology of carbon steels on stress strain curve in vicinity of yield point

    Materials Science and Technology, Volume 18, 2002, Issue 11, Pages 1272-1278

    DOI: 10.1179/026708302225006151

  114. Kiyohiro Ikeda, Kai Oide and Kenjiro Terada:

    Imperfection sensitive variation of critical loads at hilltop bifurcation point

    International Journal of Engineering Science, Volume 40, Issue 7, April 2002, Pages 743-772

    DOI: 10.1016/S0020-7225(01)00098-2

  115. Shigenobu Okazawa, Kai Oide, Kiyohiro Ikeda and Kenjiro Terada:

    Imperfection sensitivity and probabilistic variation of tensile strength of steel members

    International Journal of Solid and Structures, Volume 39, Issue 6, March 2002, Pages 1651-1671

    DOI: 10.1016/S0020-7683(01)00258-X

  116. I. Saiki, K. Terada, K. Ikeda and M. Hori:

    Appropriate number of unit cells in a representative volume element for micro-structural bifurcation encountered in a multi-scale modeling

    Computer Methods in Applied Mechanics and Engineering, Volume 191, Issues 23-24, 29 March 2002, Pages 2561-2585

    DOI: 10.1016/S0045-7825(01)00413-3

  117. Naoki Takano, Masaru Zako, Toru Okazaki and Kenjiro Terada:

    Microstructure-based evaluation of the influence of woven architecture on permeability by asymptotic homogenization theory

    Composites Science and Technology, Volume 62, Issues 10-11, August 2002, Pages 1347-1356

    DOI: 10.1016/S0266-3538(02)00076-3

  118. Kenjiro Terada, Takashi Kyoya, Motoki Kazama, Kiho Lee and Lizhu Oyang:

    Image-based modelling and analysis of microstructures for two-scale problems in geomechanics

    International Journal for Numerical and Analytical Methods in Geomechanics, Volume 26, Issue 3, March 2002, Pages 273-297 (First published 10 January 2002)

    DOI: 10.1002/nag.201

  119. Kiyohiro Ikeda, Shigenobu Okazawa, Kenjiro Terada, Hirohisa Noguchi and Tsutomu Usami:

    Recursive bifurcation of tensile steel specimens

    International Journal of Engineering Science, Volume 39, Issue 17, November 2001, Pages 1913-1934

    DOI: 10.1016/S0020-7225(01)00040-4

  120. Kazumi Matsui, Kenjiro Terada and Kohei Yuge:

    Parallelized two-scale analysis with a PC cluster for elastic-plastic heterogeneous media

    JSME International Journal Series A Solid Mechanics and Material Engineering, 2001, Volume 44, Issue 4, Pages 584-593

    DOI: 10.1299/jsmea.44.584

  121. K. Terada and N. Kikuchi:

    A class of general algorithms for multi-scale analyses of heterogeneous media

    Computer Methods in Applied Mechanics and Engineering, Volume 190, issues 40-41, 20 July 2001, Pages 5427-5464

    DOI: 10.1016/S0045-7825(01)00179-7

  122. Kenjiro Terada, Muneo Hori, Takashi Kyoya and Noboru Kikuchi:

    Simulation of the multi-scale convergence in computational homogenization approaches

    International Journal of Solids and Structures, Volume 37, Issue 16, April 2000, Pages 2285-2311

    DOI: 10.1016/S0020-7683(98)00341-2

  123. Takashi Kyoya, Kenjiro Terada and Toshikazu Kawamoto:

    Multi-scale limit load analysis for discontinuous rock mass based on the homogenization method

    International Journal for Numerical and Analytical Methods in Geomechanics, Volume 23, Issue 10, 25 August 1999, Pages 995-1019 (First published: 18 August)

    DOI: 10.1002/(SICI)1096-9853(19990825)23:10<995::AID-NAG21>3.0.CO;2-B

  124. Kazuo Murota, Kiyohiro Ikeda and Kenjiro Terada:

    Bifurcation mechanism underlying echelon-mode formation

    Computer Methods in Applied Mechanics and Engineering, Volume 170, Issue 3, 12 March 1999, Pages 423-448

    DOI: 10.1016/S0045-7825(98)00206-0

  125. K. Terada, T. Ito and N. Kikuchi:

    Characterization of the mechanical behaviors of solid-fluid mixture by the homogenization method

    Computer Methods in Applied Mechanics and Engineering, Volume 153, Issues 3-4, 30 January 1998, Pages 223-257

    DOI: 10.1016/S0045-7825(97)00071-6

  126. D. Golanski, K. Terada and N. Kikuchi:

    Macro and micro scale modeling of thermal residual stresses in metal matrix composite surface layers by the homogenization method

    Computational Mechanics, 19, 188-202 (1997)(Published: February 1997)

    DOI: 10.1007/s004660050168

  127. K. Terada, T. Miura and N. Kikuchi:

    Digital image-based modeling applied to the homogenization analysis of composite materials

    Computational Mechanics, 20, 331-346 (1997)(Published: September 1997)

    DOI: 10.1007/s004660050255

  128. Kenjiro Terada, Katsuyuki Suzuki and Hideomi Ohtsubo:

    FFT-based homogenization algorithm using digital images

    Journal of the Society of Materials Science, Japan, 1997, Volume 46, Issue 12Appendix, Pages 231-236

    DOI: 10.2472/jsms.46.12Appendix_231

  129. Kenjiro Terada and Noboru Kikuchi:

    Global-local constitutive modeling of composite materials by the homogenization method

    Journal of the Society of Materials Science, Japan, 1996, Volume 45, Issue 6Appendix, Pages 73-80

    DOI: 10.2472/jsms.45.6Appendix_73

  130. Kenjiro Terada and Noboru Kikuchi:

    Microstructural design of composites using the homogenization method and digital images

    Journal of the Society of Materials Science, Japan, 1996, Volume 45, Issue 6Appendix, Pages 65-72

    DOI: 10.2472/jsms.45.6Appendix_65

  1. Daigo HIRAYAMA, Jike HAN, Shuji MORIGUCHI and Kenjiro TERADA:

    A numerical simulation method combining gradient damage model and finite cover method for dynamic fracture

    Transactions of the Japan Society for Computational Engineering and Science, 2024, Volume 2024, Pages 20240001

    DOI: 10.11421/jsces.2024.20240001

  2. Akari NAKAMURA, Yosuke YAMANAKA, Yuichi SHINTAKU, Norio HIRAYAMA, Shuji MORIGUCHI and Kenjiro TERADA:

    Surrogate Model-based Multiscale Analysis of Elastoplastic Composites with Nonperiodicity

    Transactions of the Japan Society for Computational Engineering and Science, 2023, Volume 2023, Pages 20230008

    DOI: 10.11421/jsces.2023.20230008

  3. Koji YAMAMOTO, Masato SOMEMIYA, Norio HIRAYAMA and Kenjiro TERADA:

    Characterization of anisotropic elastoplastic behavior of unidirectional carbon fiber reinforced thermoplastic(Anisotropic yield function and distortional hardening law)

    Transactions of the JSME (in Japanese), 2023, Volume 89, Issue 927, Pages 23-00201

    DOI: 10.1299/transjsme.23-00201

  4. Tomo SATO, Masato SOMEMIYA, Norio HIRAYAMA, Koji YAMAMOTO, Seishiro MATSUBARA and Kenjiro TERADA:

    Prediction of Interfacial Adhesion Strength in CFRTP considering Plasticity of Matrix Resin using Numerical Material Testing and Neural Network

    Seikei-Kakou, Volume 35, Issue 11, Pages404-410,

  5. Masato SOMEMIYA, Miyu NAKAO, Norio HIRAYAMA, Kuniharu ARAI, Seishiro MATSUBARA and Kenjiro TERADA:

    Identification of Nonlinear Material Parameters for Thermoplastic Resin using Adaptive Range Search

    Journal of the Japan Society for Composite Materials, 2023, Volume 49, Issue 3, Pages91-99,

  6. Takashi USHIDA, Takashi NAKAYAMA and Kenjiro TERADA:

    DETERIORATION PREDICTION METHOD BASED ON BRINE FLOW IN GROUND FOR UNDERGROUND STRUCTURE NEAR TIDAL RIVER

    Journal of Japan Society of Civil Engineers, Ser. F1 (Tunnel Engineering), 2022, Volume 78, Issue 1, Pages 132-149

    DOI: 10.2208/jscejte.78.1_132

  7. Kenta TOZATO, Shun SASAKI, Nilo Lemuel J. DOLOJAN, Shuji MORIGUCHI and Kenjiro TERADA:

    Landslide Hazard Mapplng Based on Slope Stability Analysis Considering Rainfall Spatial Uncertainty

    Transactions of the Japan Society for Computational Engineering and Science, 2022, Volume 2022, Pages 20220018-

    DOI: 10.11421/jsces.2022.20220018

  8. Masato SOMEMIYA, Naoki TAGUCHI, Norio HIRAYAMA, Seishiro MATSUBARA, Koji YAMAMOTO and Kenjiro TERADA:

    Reproduction and evaluation of temperature- and strain-rate-dependent nonlinear material behavior of thermoplastic resin by hybrid parameter identification method for a viscoelastic-viscoplastic-damage constitutive model

    Transactions of the JSME (in Japanese), 2022, Volume 88, Issue 913, Pages 22-00178

    DOI: 10.1299/transjsme.22-00178

  9. Saneiki FUJITA, Nilo Lemuel DOLOJAN, Shuji MORIGUCHI, Kenjiro TERADA and Takashi KYOYA:

    Three-dimensional limit equilibrium slope stability analysis on real slope failures caused by heavy rain and earthquake

    Japanese Geotechnical Journal, 2022, Volume 17, Issue 2, Pages 159-169

    DOI: 10.3208/jgs.17.159

  10. Taiki YOSHIDA, Daiki WATANABE, Hasuka KANNO, Shuji MORIGUCHI and Kenjiro TERADA:

    QUANTIFICATION OF THE EFFECT OF ROCK SHAPE PROPARTIES ON THE DISTRIBUTION CHARACTERISTICS OF ROCKFALL RUN-OUT

    Journal of Japan Society of Civil Engineers, Ser. C (Geosphere Engineering), 2022, Volume 78, Issue 3, Pages 210-224

    DOI: 10.2208/jscejge.78.3_210

  11. Naruethep SUKULTHANASORN, Mao KURUMATANI, Koji NISHIGUCHI, Junji KATO and Kenjiro TERADA:

    Transient thermal porous structure designed by two-scale concurrent topology optimization

    Transactions of the Japan Society for Computational Engineering and Science, 2022, Volume 2022, Pages 20220004

    DOI: 10.11421/jsces.2022.20220004

  12. Reika NOMURA, Saneiki FUJITA, Yu OTAKE, Shuji MORIGUCHI, Shunichi KOSHIMURA, Kenjiro TERADA and Masahiro HASHIZUME:

    Real-time tsunami risk evaluation method by synthetic dynamics and Bayesian update

    Transactions of the Japan Society for Computational Engineering and Science, 2022, Volume 2022, Pages 20220003

    DOI: 10.11421/jsces.2022.20220003

  13. Masato SOMEMIYA, Norio HIRAYAMA, Koji YAMAMOTO, Seishiro MATSUBARA and Kenjiro TERADA:

    Prediction of Off-Axis Nonlinear Material Behavior for Unidirectional CFRTP Using Numerical Material Tests

    Journal of the Japan Society for Composite Materials, 2022, Volume 48, Issue 3, Pages96-108

    DOI: 10.6089/jscm.48.96

  14. Ryo TAKAMI, Masato SOMEMIYA, Norio HIRAYAMA, Koji YAMAMOTO, Seishiro MATSUBARA, Yoshiteru ISHIBASHI and Kenjiro TERADA:

    Evaluation of Interface Adhesion Strength of Unidirectional CFRP Using Numerical Material Test and Neural Network

    Journal of the Japan Society for Composite Materials, 2022, Volume 48, Issue 1, Pages32-39

    DOI: 10.6089/jscm.48.32

  15. Yuichi SHINTAKU, Daiki IMAI and Kenjiro TERADA:

    Numerical material testing based on homogenization method for non-periodic media (Formulation using microscopic fluctuation displacement and macroscopic strain)

    Transactions of the JSME (in Japanese), Volume 88, Issue 909, Pages 22-00049

    DOI: 10.1299/transjsme.22-00049

  16. Yuichi SHINTAKU, Fumitoshi NAKAMURA, Seiichiro TSUTSUMI and Kenjiro TERADA:

    An implicit solution for an elastic-plastic model with hardening rule depending on plastic strain range using a primal-dual interior point method

    Transactions of the Japan Society for Computational Engineering and Science, 2022, Volume 2022, Pages 20220001

    DOI: 10.11421/jsces.2022.20220001

  17. Daiki WATANABE, Shuji MORIGUCHI and Kenjiro TERADA:

    EFFECT OF PARTICLE SIZE DISTRIBUTIONS ON GRANULAR FLOW SIMULATIONS USING DISCRETE ELEMENT METHOD

    Journal of Japan Society of Civil Engineers, Ser. C (Geosphere Engineering), 2021, Volume 77, Issue 4, Pages 392-402

    DOI: 10.2208/jscejge.77.4_392

  18. Riichi SUGAI, Yuya YAMAGUCHI, Shuji MORIGUCHI and Kenjiro TERADA:

    APplication of extended B-spline-based implicit material point method to elastoplastic problems

    Transactions of the Japan Society for Computational Engineering and Science, 2021, Volume 2021, Pages 20210022

    DOI: 10.11421/jsces.2021.20210022

  19. Jike HAN, Seishiro MATSUBARA, SHINnosuke NISHI, Kenji TAKADA, Mayu MURAMATSU, Masaki OMIYA, Kensuke OGAWA, Kai OIDE , Takaya KOBAYASHI, Masanobu MURATA, Shuji MORIGUCHI and Kenjiro TERADA:

    Ductile fracture crack phase-field model equiPagesd with a novel degrading fracture toughness

    Transactions of the Japan Society for Computational Engineering and Science, 2021, Volume 2021, Pages 20210014

    DOI: 10.11421/jsces.2021.20210014

  20. Koto ITO, Masaaki WANI, Seiji SAITO, Shun SUZUKI and Kenjiro TERADA:

    DEVELOPMENT AND VERIFICATION OF SEISMIC RESPONSE ANALYSIS METHOD OF LAYERED ROCK MASS BY USING HOMOGENIZATION METHOD

    Journal of Japan Society of Civil Engineers, Ser. A1 (Structural Engineering & Earthquake Engineering (SE/EE)), 2021, Volume 77, Issue 4, Pages I_394-I_405

    DOI: 10.2208/jscejseee.77.4_I_394

  21. Ryohei KANEZAWA, Yuichi SHINTAKU and Kenjiro TERADA:

    Cohesive-traction embedded damage-like constitutive law based on non-local apploach and its numerical implementation improved by Petrov-Galerkin method

    Transactions of the Japan Society for Computational Engineering and Science, Volume 2021, Pages 20210008-20210008

    DOI: 10.11421/jsces.2021.20210008

  22. Yosuke Yamanaka, Seishiro MATSUBARA, Risa SAITO, Shuji MORIGUCHI and Kenjiro TERADA:

    Incremental variational formulation of time evolution of cure-degree along with viscoelasticity for thermosetting resins

    Transactions of the Japan Society for Computational Engineering and Science, 2020, Volume 2020, Pages 20200011-

    DOI: 10.11421/jsces.2020.20200011

  23. Jike HAN, Shinnosuke NISHI, Kenji TAKADA, Mayu MURAMATSU, Masaki OMIYA, Kensuke OGAWA, Kai OIDE, Takuya KOBYASHI, Masanobu MURATA, Shuji MORIGUCHI and Kenjiro TERADA:

    A phase-field ductile fracture model with a variable regularization length parameter

    Transactions of the Japan Society for Computational Engineering and Science, 2020, Volume 2020, Pages 20200005-

    DOI: 10.11421/jsces.2020.20200005

  24. Kenta TOZATO, Takuma KOTANI, Ryo HATANO, Shinsuke TAKASE, Shuji MORIGUCHI, Kenjiro TERADA and Yu OTAKE:

    Tsunami risk assessment using spatial modes extracted from results of numerical analysis

    Transactions of the Japan Society for Computational Engineering and Science, 2020, Volume 2020, Pages 20200003-

    DOI: 10.11421/jsces.2020.20200003

  25. Risa SAITO, Yuya YAMAGUCHI, Shuji MORIGUCHI, Yasuko MIHARA, Takuya KOBAYASHI and Kenjiro TERADA:

    Determination of macroscopic viscoelastic properties as well as macroscopic thermal deformation and cure-shrinkage properties of fiber reinforced plastics in consideration of cure process

    Transactions of the JSME, 2019, Volume 85, Issue 870, Pages 18-00396

    DOI: 10.1299/transjsme.18-00396

  26. Koji YAMAMOTO, Yoshiteru ISHIBASHI, Masato SOMEMIYA, Norio HIRAYAMA and Kenjiro TERADA:

    Computational study on temperature-dependencies of relaxation and elastic properties in anisotropic viscoelastic constitutive law for fiber-reinforced thermoplastic resin

    Transactions of the JSME (in Japanese), 2019, Volume 85, Issue 874, Pages 19-00058-

    DOI: 10.1299/transjsme.19-00058

  27. Ryo HATANO, Seishiro MATSUBARA, Shuji MORIGUCHI and Kenjiro TERADA:

    A data-driven micro-macro coupled multiscale analysis for hyperelastic composite materials

    Transactions of the Japan Society for Computational Engineering and Science, 2019, Volume 2019, Pages 20190015-

    DOI: 10.11421/jsces.2019.20190015

  28. Hiroshi KOBYASHI, Norio HIRAYAMA, Koji YAMAMOTO and Kenjiro TERADA:

    Prediction of Coefficient of Thermal Expansion for CFRTP Using Numerical Material Testing

    Journal of the Japan Society for Composite Materials, 2019, Volume 45, Issue 3, Pages 98-104

    DOI: 10.6089/jscm.45.98

  29. Kiyomichi YAMAGUCHI, Kazuto Yamamura, Norio TAKEUCHI and Kenjiro TERADA:

    A MULTI STAGE FAILURE SIMULATION OF FRAMED STRUCTURE USING HPM

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2019, Volume 75, Issue 2, Pages I_225-I_236

    DOI: 10.2208/jscejam.75.2_I_225

  30. SHINnosuke NISHI, Kenjiro TERADA, İlker Temizer:

    Isogeometric homogenization analysis of dry woven fabrics involving micro-scale frictional contact

    Transactions of the JSME(in Japanese), 2018, Volume 84, Issue 859, Pages 17-00554-17-00554

    DOI: 10.1299/transjsme.17-00554

  31. Reika NOMURA, SHINsuke TAKASE, Shuji MORIGUCHI and Kenjiro TERADA:

    Viscosity Evaluation of Solid-Liquid Lixture based on Direct Numerical Simulation

    Transactions of the Japan Society for Computational Engineering and Science, 2018, 2018, Volume 2018, Issue 2, Pages 20182007-

    DOI: 10.11421/jsces.2018.20182007

  32. Yo FUKUTANI, Shuji MORIGUCHI, Takuma KOTANI and Kenjiro TERADA:

    PROBABILISTIC TSUNAMI LOSS ESTIMATION USING RESPONSE-SURFACE METHOD - APPLICATION TO SAGAMI TROUGH EARTHQUAKE-

    Journal of Japan Society of Civil Engineers, Ser. B2 (Coastal Engineering), Volume 74, Issue 2, Pages I_463-I_468

    DOI: 10.2208/kaigan.74.I_463

  33. Hasuka KANNO, Shuji MORIGUCHI, Kenjiro TERADA, Shunsuke HAYASHI, Yusaku ISOBE and Shoji IWANAGA:

    STATISTICAL MODELING FOR EVALUATING THE OPTIMAL PLACEMENT OF ROCKFALL PROTECTION STRUCTURES ON A ROAD

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2018, Volume 74, Issue 2, Pages I_13-I_21

    DOI: 10.2208/jscejam.74.I_13

  34. Kouhei Kitou, Takuma KOTANI, Yuya YAMAGUCHI, SHINsuke TAKASE, Shuji MORIGUCHI and Kenjiro TERADA:

    A HAZARD MAP BASED ON 3D SNOW AVALANCHE SIMULATION

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2018, Volume 74, Issue 2, Pages I_203-I_211

    DOI: 10.2208/jscejam.74.I_203

  35. Masami SATO, Mayu MURAMATSU, Kenjiro TERADA, Satoshi WATANABE, Keiji YASHIRO, Tatsuya KAWADA and Harumi Yokokawa:

    Analysis System of Transient Electrochemo-mechanical Simulation of Solid Oxide Fuel Cell Implemented in Commercial FEM Software

    Transactions of the Japan Society for Computational Engineering and Science, 2017, Volume 2017, Pages 20170004-

    DOI: 10.11421/jsces.2017.20170004

  36. Hasuka KANNO, Shuji MORIGUCHI, SHINsuke TAKASE, Kenjiro TERADA, Kazuhide SAWADA and Masanori KONAMI:

    Spatial and probabilistic risk evaluation of rockfalls using Gaussian mixture model

    Japanese Geotechnical Journal, 2017, Volume 12, Issue 2, Pages 211-221

    DOI: 10.3208/jgs.12.211

  37. Hasuka KANNO, Shuji MORIGUCHI, SHINsuke TAKASE and Kenjiro TERADA:

    A BASIC STUDY OF OPTIMAL DESIGN METHOD FOR ROCKFALL COUNTERMEASURES BASED ON DISCRETE ELEMENT ANALYSIS

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2017, Volume 73, Issue 2, Pages I_469-I_476

    DOI: 10.2208/jscejam.73.I_469

  38. Takaya KOBYASHI and Kenjiro TERADA:

    RESEARCH TRENDS OF COMPUTATIONAL SOLID MECHANICS AND THEIR PRACTICAL APPLICATIONS

    SOCIOTECHNICA, June 2017, Volume 14, Pages 166-177

    URL: http://shakai-gijutsu.org/vol14/14_167.pdf

  39. Marina OKAWA, Shun SUZUKI, SHINsuke TAKASE, Shuji MORIGUCHI, Kenjiro TERADA and Mao KURUMATANI:

    CHARACTERIZATION OF DEFORMATION PROPERTIES OF SURFACE GROUND DUE TO FAULT MOVEMENT USING FINITE-STRAIN DAMAGE MODEL

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2017, Volume 73, Issue 2, Pages I_497-I_505

    DOI: 10.2208/jscejam.73.I_497

  40. Masami SATO, Mayu MURAMATSU, Seishiro MATSUBARA, SHINnosuke NISHI, Kenjiro TERADA, Keiji YASHIRO and Tatsuya KAWADA:

    NUMERICAL PLATE TESTING FOR NON-LINEAR MULTI-SCALE ANALYSIS OF PLATE-SHAPED DEVICE

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2017, Volume 73, Issue 2, Pages I_283-I_294

    DOI: 10.2208/jscejam.73.I_283

  41. SHINsuke TAKASE, Yuya YAMAGUCHI, Shuji MORIGUCHI, Kenjiro TERADA, Kazuya NOJIMA and Masaaki SAKURABA:

    FLUID-STRUCTURE INTERACTION ANALYSIS BASED ON FINITE COVER METHOD USING SHALLOW WATER EQUATIONS

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2017, Volume 73, Issue 2, Pages I_305-I_312

    DOI: 10.2208/jscejam.73.I_305

  42. Naohide UEHARA, Ikkoh TACHIBANA, Hasuka KANNO, Shuji MORIGUCHI, Kenjiro TERADA, SHINsuke TAKASE and Yu OTAKE:

    EFFECTS OF SPATIAL CHARACTERISTICS OF SLOPE PROPERTIES IN ROCKFALL SIMULATIONS USING DEM

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2017, Volume 73, Issue 2, Pages I_507-I_516

    DOI: 10.2208/jscejam.73.I_507

  43. Yuya YAMAGUCHI, SHINsuke TAKASE, Shuji MORIGUCHI, Kenjiro TERADA, Kenichi Oda and Isao Kamiishi:

    Three-dimensional nonstructural finite element analysis of snow avalanche using non-Newtonian fluid model

    Transactions of the Japan Society for Computational Engineering and Science, Volume 2017, Pages 20170011-

    DOI: 10.11421/jsces.2017.20170011

  44. Mao KURUMATANI, Shunitsu ABE, Yuto SOMA and Kenjiro TERADA:

    A FINITE STRAIN ISOTROPIC DAMAGE MODEL FOR CONCRETE BASED ON FRACTURE MECHANICS AND MODIFIED VON-MISES CRITERION

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2017, Volume 73, Issue 1, Pages 11-21

    DOI: 10.2208/jscejam.73.11

  45. Seishiro MATSUBARA and Kenjiro TERADA:

    Rheological constitutive model for thermoplastic resin based on viscoplastic-viscoelastic multiplicative decomposition of deformation gradient

    Transactions of the JSME, 2016, Volume 82, Issue 839, Pages 16-00060-

    DOI: 10.1299/transjsme.16-00060

  46. SHINnosuke NISHI, Kenjiro TERADA, Junji KATO, Shinji NISHIWAKI and Kazuhiro IZUI:

    Multiscale topology optimization for composite plates undergoing thermal displacement

    Transactions of the Japan Society for Computational Engineering and Science, 2016, Volume 2016, Pages 20160024-

    DOI: 10.11421/jsces.2016.20160024

  47. Junji KATO, Daishun YACHI, Shunsuke NISHIzawa, SHINsuke TAKASE, Kenjiro TERADA and Takashi KYOYA:

    Multi-scale topology optimization for hyperelastic composites aplying a decoupling multi-scale analysis

    Transactions of the Japan Society for Computational Engineering and Science, 2015, Volume 2016, Pages 20160001-

    DOI: 10.11421/jsces.2016.20160001

  48. Seishiro MATSUBARA, Toshiyuki SAITOU, Kai OIDE, Hiroto SHIN, Manabu UMEDA, Yasuhiro KATSUDA, Yasuko MIHARA, Takaya KOBYASHI and Kenjiro TERADA:

    Constitutive equations of earthenware material during firing processes and determination of their function forms

    Transactions of the JSME(in Japanese), 2016, Volume 82, Issue 843, Pages 16-00266-16-00266

    DOI: 10.1299/transjsme.16-00266

  49. Shuji MORIGUCHI, Yuma OHTA, SHINsuke TAKASE, Kenjiro TERADA, Keita ABE and Takayuki AOKI:

    A SIMULATION OF LARGE SCALE SEDIMENT FLOW EXPERIMENT USING DISCRETE ELEMENT METHOD DEM

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2016, Volume 72, Issue 2, Pages I_449-I_457

    DOI: 10.2208/jscejam.72.I_449

  50. Yuichi SHINTAKU and Kenjiro TERADA:

    Cohesive-force embedded damage model and its application to crack propagation analyses

    Transactions of the Japan Society for Computational Engineering and Science, 2016, Volume 2016, Pages 20160011-

    DOI: 10.11421/jsces.2016.20160011

  51. Junji KATO, Ryosuke KASAI, Takashi KYOYA and Kenjiro TERADA:

    EVALUATION OF MICRO-CRACK DISTRIBUTION USING INVERSE HOMOGENIZATION METHOD

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2016, Volume 72, Issue 1, Pages 27-37

    DOI: 10.2208/jscejam.72.27

  52. Takuma KOTANI, SHINsuke TAKASE, Shuji MORIGUCHI, Kenjiro TERADA, Yo HUKUTANI, Yu OTAKE, Kazuya Nojima and Masaaki SAKURABA:

    NUMERICAL-ANALYSIS-AIDED PROBABILISTIC TSUNAMI HAZARD EVALUATION USING RESPONSE SURFACE

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2016, Volume 72, Issue 1, Pages 58-69

    DOI: 10.2208/jscejam.72.58

  53. Ayami SATO, Takayuki YAMADA, Kazuhiro IZUI, Shinji NISHIWAKI and Kenjiro TERADA:

    Optimum design of lattice structures based on continuum expression using micropolar continuum theory

    Transactions of the JSME, 2016, Volume 82, Issue 840, Pages 16-00171-

    DOI: 10.1299/transjsme.16-00171

  54. Mao KURUMATANI, Yuki NEMOTO, Yuto SOMA and Kenjiro TERADA:

    3D fracture simulation of reinforced concrete based on fracture mechanics for concrete and its performance assessment

    Transactions of the Japan Society for Computational Engineering and Science, 2016, Volume 2016, Pages 20160004-

    DOI: 10.11421/jsces.2016.20160004

  55. Koji YAMAMOTO, Norio HIRAYAMA and Kenjiro TERADA:

    Identification of Hill's anisotropic parameters for reinforced plastics based on numerical material test results

    Transactions of the JSME(in Japanese), 2016, Volume 82, Issue 840, Pages 16-00056-

    DOI: 10.1299/transjsme.16-00056

  56. Seishiro MATSUBARA, Kenjiro TERADA and Fumio FUJII:

    Isogeometric analysis method for heterogeneous periodic microstructures

    Transactions of the Japan Society for Computational Engineering and Science, 2016, Volume 2016, Pages 20160010-

    DOI: 10.11421/jsces.2016.20160010

  57. Junji KATO, Daishun YACHI, Shunsuke NISHIZAWA, SHINsuke TAKASE, Kenjiro TERADA and Takashi KYOYA:

    Topology optimization of microstructures for hyperelastic composites based on a decoupling multi-scale analysis

    Transactions of the Japan Society for Computational Engineering and Science, 2015, Volume 2015, Pages 20150014-

    DOI: 10.11421/jsces.2015.20150014

  58. Kenjiro TERADA, Norio HIRAYAMA, Koji YAMAMOTO and Seishiro MATSUBARA:

    Numerical plate testing for linear multi-scale analyses of composite plates

    Transactions of the Japan Society for Computational Engineering and Science, 2015, Volume 2015, Pages 20150001-

    DOI: 10.11421/jsces.2015.20150001

  59. Seishiro MATSUBARA and Kenjiro TERADA:

    FINITE STRAIN VISCOELASTO-VISCOPLASTIC CONSTITUTIVE MODEL FOR THERMOPLASTIC RESINS IN CONSIDERATION OF SELF-HEATING PHENOMENON

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2015, Volume 71, Issue 2, Pages I_509-I_520

    DOI: 10.2208/jscejam.71.I_509

  60. Shuji MORIGUCHI, Yu OTAKE, Shinsuke TAKASE, Kenjiro TERADA, Yuji KOSAKA, Masaru HORIUCHI, Kazuhide SAWADA and Atsushi YASHIMA:

    Probabilistic risk evaluation of rockfalls using DEM

    Japanese Geotechnical Journal, 2015, Volume 10, Issue 4, Pages 503-515

    DOI: 10.3208/jgs.10.503

  61. Shuji MORIGUCHI, Yuta HIRUMA, shinsuke TAKASE and Kenjiro TERADA:

    EFFECTS OF PARTICLE SIZE AND PARTICLE SHAPE IN FLOW SIMULATIONS OF DRY SAND USING DISCRETE ELEMENT METHOD DEM

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2015, Volume 71, Issue 2, Pages I_587-I_594

    DOI: 10.2208/jscejam.71.I_587

  62. Takashi USHIDA, Kiwamu TSUNO, Takashi NAKAYAMA, Shinsuke TAKASE, Kenjiro TERADA and Takashi KYOYA:

    A PREDICTION MODEL OF STEEL CORROSION IN CONCRETE BASED ON REACTION-DIFFUSION EQUATION

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2015, Volume 71, Issue 1, Pages 34-45

    DOI: 10.2208/jscejam.71.34

  63. Takashi USHIDA, Takashi NAKAYAMA, Kiwamu TSUNO, Keisuke SHIMAMOTO, Shinji YAKITA, Kenjiro TERADA and Takashi KYOYA:

    FIELD DATA ANALYSIS AND FUTURE PREDICTION METHOD OF MATERIAL DETERIORATIONS IN CUT-AND-COVER TUNNELS

    Journal of Japan Society of Civil Engineers, Ser. F1 (Tunnel Engineering), 2015, Volume 71, Issue 1, Pages 41-53

    DOI: 10.2208/jscejte.71.41

  64. Shinnosuke NISHI, Kenjiro TERADA and Junji KATO:

    TOPOLOGY OPTIMIZATION OF CROSS-SECTION STRUCTURE FOR THICK COMPOSITE PLATE

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2015, Volume 71, Issue 2, Pages I_245-I_254

    DOI: 10.2208/jscejam.71.I_245

  65. Reika NOMURA, Shinsuke TAKASE, Kenjiro TERADA and Shuji MORIGUCHI:

    MULTISCALE NUMERICAL EXPERIMENT FOR EVALUATING DISASTER-REDUCTION CHARACTERISTICS OF TIDE-PROTECTION FOREST

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2015, Volume 71, Issue 2, Pages I_193-I_201

    DOI: 10.2208/jscejam.71.I_193

  66. Shinsuke TAKASE, Shuji MORIGUCHI, Kenjiro TERADA, Naoki KOYAMA, Kenji KANEKO, Mao KURUMATANI, Junji KATO and Takashi KYOYA:

    FINITE COVER-BASED FLUID-STRUCTURE INTERACTION ANALYSIS INCLUDING FRACTURE OF STRUCTURE

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2015, Volume 71, Issue 2, Pages I_203-I_212

    DOI: 10.2208/jscejam.71.I_203

  67. Yuki YAMAKAWA, Hiroki Mizoe, Yutaka Chida, Jo Toda, Kiyohiro IKEDA, Hiroshi Tamura and Kenjiro TERADA:

    UPLIFT CAPACITY ANALYSIS OF ANCHOR FOUNDATION FOR TRANSMISSION TOWER ON SLOPE CREST

    Journal of Japan Society of Civil Engineers, Ser. C (Geosphere Engineering), 2015, Volume 71, Issue 1, Pages 1-13

    DOI: 10.2208/jscejge.71.1

  68. Junji KATO, Hiroya HOSHIBA, Shinsuke TAKASE, Kenjiro TERADA and Takashi KYOYA:

    Accuracy validation of analytical sensitivity in topology optimization for elastoplastic composites

    Transactions of the Japan Society for Computational Engineering and Science, 2014, Volume 2014, Pages 20140012-

    DOI: 10.11421/jsces.2014.20140012

  69. Junji KATO, Yoshiki Kamo, Shinsuke TAKASE, Shuji MORIGUCHI, Mao KURUMATANI, Kenjiro TERADA and Takashi KYOYA:

    PRELIMINARY INVESTIGATION OF PHASE-FIELD TOPOLOGY OPTIMIZATION FOR MICROSTRUCTURES

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2014, Volume 70, Issue 2, Pages I_173-I_183

    DOI: 10.2208/jscejam.70.I_173

  70. Hiroya HOSHIBA, Junji KATO, Shinsuke TAKASE, Kenjiro TERADA and Takashi KYOYA:

    MULTIPHASE TOPOLOGY OPTIMIZATION CONSIDERING ELASTOPLASTIC CYCLIC DEFORMATION AND ACCURACY VALIDATION OF ANALYTICAL SENSITIVITY

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2014, Volume 70, Issue 2, Pages I_317-I_328

    DOI: 10.2208/jscejam.70.I_317

  71. Yuichi SHINTAKU, Mayu MURAMATSU, Seiichiro TSUTSUMI, Kenjiro TERADA, Takashi KYOYA, Junji KATO and Shuji MORIGUCHI:

    An analysis of fatigue crack propagation in pollycrystalline metals using cohesive zone model with damage variable

    Transactions of the Japan Society for Computational Engineering and Science, 2014, Volume 2014, Pages 20140014-4

    DOI: 10.11421/jsces.2014.20140014

  72. Seishiro MATSUBARA, Yusuke ARAKAWA, Junji KATO, Kenjiro TERADA, Takashi KYOYA, Yuta UENO, Naohiro MIYANAGA, Norio HIRAYAMA and Koji YAMAMOTO:

    De-coupled multi-scale analyses of fiber-reinforced composites by elastic-creep-damage combined model

    Transactions of the Japan Society for Computational Engineering and Science, 2014, Volume 2014, Pages 20140004-

    DOI: 10.11421/jsces.2014.20140004

  73. Shinya KAMINO, Mao KURUMATANI, Kenjiro TERADA, Takashi KYOYA and Kazuo KASHIYAMA:

    Simulation of compressive failure in quasi-brittle materials involving contact on crack interfaces

    Transactions of the Japan Society for Computational Engineering and Science, 2014, Volume 2014, Pages 20140006-20140006

    DOI: 10.11421/jsces.2014.20140006

  74. Ikkoh TACHIBANA, Shuji MORIGUCHI, Kenjiro TERADA, SHINsuke TAKASE, Takashi KYOYA and Junji KATO:

    Quantitative relationship between shape representation quality and calculation accuracy

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2014, Volume 70, Issue 2, Pages I_519-I_530

    DOI: 10.2208/jscejam.70.I_519

  75. Shinsuke TAKASE, Junji KATO, Shuji MORIGUCHI, Kenjiro TERADA, Takashi KYOYA, Kazuya Nojima, Masaaki SAKURABA and Kazuo KASHIYAMA:

    TSUNAMI SIMULATION USING 2D-3D HYBRID METHOD BASED ON STABILIZED FINITE ELEMENT METHOD

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2014, Volume 70, Issue 2, Pages I_307-I_315

    DOI: 10.2208/jscejam.70.I_307

  76. Tomohiro ISHIDA, Shinpei SHIBUTANI, Junji KATO, Kenjiro TERADA, Takashi KYOYA, Daisuke ANDO and Junichi KOIKE:

    Deformation and Strength Characterization of Mg Alloys with Rolled Crystallographic Textures by Crystal Plasticity Finite Element Method

    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 2013, Volume 79, Issue 808, Pages 1840-1851

    DOI: 10.1299/kikaia.79.1840

  77. Daishun YACHI, Junji KATO, Shinsuke TAKASE, Kenjiro TERADA and Takashi KYOYA:

    Analytical sensitivity analysis for decoupling multi-scale topology optimization of composites

    Transactions of the Japan Society for Computational Engineering and Science, 2013, Volume 2013, Pages 20130022-20130022

    DOI: 10.11421/jsces.2013.20130022

  78. Mao KURUMATANI, Shinya KAMINO and Kenjiro TERADA:

    Simulation of Compressive Failure in Concrete by Focusing on Heterogeneity due to Coarse Aggregates

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2013, Volume 69, Issue 2, Pages I_115-I_123

    DOI: 10.2208/jscejam.69.I_115

  79. Mao KURUMATANI, Kenjiro TERADA, Takashi KYOYA, Junji KATO and Kazuo KASHIYAMA:

    Discrete analysis method for fracture simulation using structural elements

    Transactions of the Japan Society for Computational Engineering and Science, 2013, Volume 2013, Pages 20130010-

    DOI: 10.11421/jsces.2013.20130010

  80. Mao KURUMATANI, Kenjiro TERADA, Junji KATO, Takashi KYOYA and Kazuo KASHIYAMA:

    An isotropic damage model based on fracture mechanics for concrete and its evaluation

    Transactions of the Japan Society for Computational Engineering and Science, 2013, Volume 2013, Pages 20130015-

    DOI: 10.11421/jsces.2013.20130015

  81. Junji KATO, Daishun YACHI, Shinsuke TAKASE, Kenjiro TERADA and Takashi KYOYA:

    Three dimensional multi-scale topology optimization of composites

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2013, Volume 69, Issue 2, Pages I_133-I_144

    DOI: 10.2208/jscejam.69.I_133

  82. Takashi SASAGAWA, Ken TAKAHASHI, Kenjiro TERADA and Tatsuya KAWADA:

    Estimation of macroscopic material properties using sintering simulation of porous microstructure affected by mechanical effects

    Transactions of the Japan Society for Computational Engineering and Science, 2012, Volume 2012, Pages 20120004-

    DOI: 10.11421/jscejam.2012.20120004

  83. Junji KATO, Kenjiro TERADA and Takashi KYOYA:

    Topology optimization of microstructure for composites considering macroscopic structural response

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2012, Volume 68, Issue 2, Pages I_279-I_287

    DOI: 10.2208/jscejam.68.I_279

  84. Tomohiro ISHIDA, Shinpei SHIBUTANI, Junji KATO, Kenjiro TERADA, Takashi KYOYA, Daisuke ANDO and Junichi KOIKE:

    A new constitutive model for crystal plasticity with deformation twinning

    Transactions of the Japan Society for Computational Engineering and Science2012, , Volume 2012, Pages 20120014-

    DOI: 10.11421/jsces.2012.20120014

  85. Mao KURUMATANI and Kenjiro TERADA:

    A comparative study on PU-based finite element methods for apploximating strong/weak discontinuities

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2012, Volume 68, Issue 2, Pages I_129-I_138

    DOI: 10.2208/jscejam.68.I_129

  86. Masato NAKAMURA, Shinsuke TAKASE, Kazuo KASHIYAMA, Kenjiro TERADA and Mao KURUMATANI:

    A Simulation Method for Fluid-Structure Interaction Problems with Free Surface based on the Finite Cover Method

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), Volume 67, Issue 2, Pages I_199-I_208

    DOI: 10.2208/jscejam.67.I_199

  87. Junji KATO, Keiichiro ISHII, Kenjiro TERADA and Takashi KYOYA:

    Numerical investigation of optimal layout of rockbolts for ground structures

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2011, Volume 67, Issue 2, Pages I_107-I_116

    DOI: 10.2208/jscejam.67.I_107

  88. Junji KATO, Ekkehard RAMM, Kenjiro TERADA and Takashi KYOYA:

    MATERIAL SHAPE OPTIMIZATION FOR FIBER REINFORCED COMPOSITES APPLYING A DAMAGE FORMULATION

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2011, Volume 67, Issue 1, Pages 54-68

    DOI: 10.2208/jscejam.67.54

  89. Junji KATO, Ekkehard RAMM, Kenjiro TERADA and Takashi KYOYA:

    MULTIPHASE MATERIAL OPTIMIZATION FOR FIBER REINFORCED COMPOSITES CONSIDERING STRAIN SOFTENING

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2011, Volume 67, Issue 1, Pages 39-53

    DOI: 10.2208/jscejam.67.39

  90. Takashi YAMAMOTO, Shinichi MARUYAMA, Kazuhiro IZUI, Shinji NISHIWAKI and Kenjiro TERADA:

    Equivalent Properties of Sound Absorbing Poroelastic Material Using the Homogenization Method

    TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 2011, Volume 77, Issue 773, Pages 75-88

    DOI: 10.1299/kikaic.77.75

  91. Mao KURUMATANI, Kenjiro TERADA and Takashi KYOYA:

    STUDY ON WAVE PROPAGATION ANALYSES IN HETEROGENEOUS MATERIALS USING X-FEM

    Journal of Japan Society of Civil Engineers, Ser. A2 (APplied Mechanics (AM)), 2011, Volume 67, Issue 1, Pages 69-81

    DOI: 10.2208/jscejam.67.69

  92. Takashi YAMAMOTO, Shinichi MARUYAMA, Kazuhiro IZUI, Shinji NISHIWAKI and Kenjiro TERADA:

    A Model for Sound-Absorbing Poroelastic Material Using Multiscale Analysis(Mechanical Systems)

    Transactions of the Japan Society of Mechanical Engineers Series C, 2010, Volume 76, Issue 768, Pages 2039-2048

    DOI: 10.1299/kikaic.76.2039

  93. Ikumu WATANABE and Kenjiro TERADA:

    An Evaluation Method of Macroscopic Yield Strength for Polycrystalline Metals Subjected to Plastic Forming by Micro-Macro Decoupling Analysis

    Transactions of the Japan Society of Mechanical Engineers Series A, 2010, Volume 76, Issue 766, Pages 752-760

    DOI: 10.1299/kikaia.76.752

  94. Akira ISHIKAWA, Kenjiro TERADA, Takashi KYOYA and Yasuhiro SHAMOTO:

    MULTI-SCALE ANALYSIS METHOD FOR PARTIALLY IMPROVED GROUNDS USING A NEWLY PROPOSED NONLINEAR ELASTIC CONSTITUTIVE MODEL

    Doboku Gakkai Ronbunshuu C, 2010, Volume 66, Issue 1, Pages 145-155

    DOI: 10.2208/jscejc.66.145

  95. Akira ISHIKAWA, Kenjiro TERADA, Takashi KYOYA and Yasuhiro SHAMOTO:

    VERIFICATION OF MULTI-SCALE ANALYSIS FOR PARTIALLY IMPROVED GROUNDS BY CENTRIFUGAL EXPERIMENTS AND ITS APPLICATION TO IN-SITU LOAD-SETTLEMENT PROBLEM

    Doboku Gakkai Ronbunshuu C, 2010, Volume 66, Issue 2, Pages 332-341

    DOI: 10.2208/jscejc.66.332

  96. Mao KURUMATANI, Kenjiro TERADA and Norio TAKEUCHI:

    MESO-SCALE BEHAVIOR OF FRACTURE PROCESS ZONE IN QUASI-BRITTLE MATERIALS INDUCED BY MICRO-MICRO-CRACK INTERACTION

    Doboku Gakkai Ronbunshuu A, 2010, Volume 66, Issue 3, Pages 505-515

    DOI: 10.2208/jsceja.66.505

  97. Kenjiro TERADA, Yasuaki HAMANA and Norio HIRAYAMA:

    A Method of Viscoelastic Two-Scale Analyses for FRP

    Transactions of the Japan Society of Mechanical Engineers Series A, 2009, Volume 75, Issue 760, Pages 1674-1683

    DOI: 10.1299/kikaia.75.1674

  98. Mao KURUMATANI and Kenjiro TERADA:

    MECHANISM OF SIZE EFFECT IN QUASI-BRITTLE MATERIALS BY FOCUSING ON THE MICRO-CRACK FORMATIONS

    Doboku Gakkai Ronbunshuu A, 2009, Volume 65, Issue 1, Pages 216-227

    DOI: 10.2208/jsceja.65.216

  99. Mao KURUMATANI, Kenjiro TERADA, Takashi KYOYA and Tomohisa Hashizume:

    A METHOD OF DISCRETE CRACK GROWTH ANALYSIS FOR QUASI-BRITTLE MATERIALS AND NUMERICAL STUDY OF MIXED-MODE FRACTURE OF CONCRETE

    Doboku Gakkai Ronbunshuu A, 2009, Volume 65, Issue 1, Pages 165-177

    DOI: 10.2208/jsceja.65.165

  100. Kenjiro TERADA, Takenori INUGAI, Yasuaki HAMANA, Akio MIYORI and Norio HIRAYAMA:

    Parameter Identification for Anisotropic Hyperelastic Materials by Numerical Material Testing

    Transactions of the Japan Society for Computational Engineering and Science, 2008, Volume 2008, Pages 20080024-

    DOI: 10.11421/jsces2008.20080024

  101. Kenjiro TERADA, Takenori INUGAI and Norio HIRAYAMA:

    A Method of Numerical Material Testing in Nonlinear Multiscale Material Analyses

    Transactions of the Japan Society of Mechanical Engineers Series A, 2008, Volume 74, Issue 744, Pages 1084-1094

    DOI: 10.1299/kikaia.74.1084

  102. Mao KURUMATANI, Kenjiro TERADA and Hiroshi OKUYAMA:

    Multi-scale thermo-elastic coupled analysis of porous media based on the homogenization method in consideration of the size of microstructures

    Transactions of the Japan Society for Computational Engineering and Science, 2008, Volume 2008, Pages 20080029-

    DOI: 10.11421/jsces2008.20080029

  103. Ikumu WATANABE, Kenjiro TERADA and Masayoshi AKIYAMA:

    Grain Size Dependence of Tensile Strength of Polycrystalline Metals by Crystal-Plasticity-Damage Multi-Scale Analyses

    Transactions of the Japan Society of Mechanical Engineers Series A, 2008, Volume 74, Issue 739, Pages 412-418

    DOI: 10.1299/kikaia.74.412

  104. Mao KURUMATANI and Kenjiro TERADA:

    MULTI-SCALE MULTI-PHYSICS ANALYSIS FOR DETERIORATION OF QUASI-BRITTLE MATERIALS INVOLVING MICRO-CRACK PROPAGATIONS

    Doboku Gakkai Ronbunshuu A, 2008, Volume 64, Issue 2, Pages 363-375

    DOI: 10.2208/jsceja.64.363

  105. Mao KURUMATANI and Kenjiro TERADA:

    AN EXPLICIT SOLUTION ALGORITHM FOR COHESIVE CRACK MODEL AND ITS EVALUATION

    Doboku Gakkai Ronbunshuu A, 2008, Volume 64, Issue 3, Pages 627-638

    DOI: 10.2208/jsceja.64.627

  106. Mao KURUMATANI and Kenjiro TERADA:

    A method for crack propagation analysis incorporated with nodal-integration FEM

    Transactions of the Japan Society for Computational Engineering and Science, 2008, Volume 2008, Pages 20080002-

    DOI: 10.11421/jsces2008.20080002

  107. Mao KURUMATANI and Kenjiro TERADA:

    DEVELOPMENT OF GLOBAL-LOCAL FINITE COVER METHOD AND ITS APPLICATION TO THE ANALYSIS OF CRACK GROWTH IN CONCRETE DUE TO REINFORCEMENT CORROSION

    Doboku Gakkai Ronbunshuu A, 2008, Volume 64, Issue 1, Pages 16-26

    DOI: 10.2208/jsceja.64.16

  108. Mao KURUMATANI, Takashi KOJIMA and Kenjiro TERADA:

    Performance assessment of nodal-integration finite element method

    Transactions of the Japan Society for Computational Engineering and Science, 2007, Volume 2007, Pages 20070015-8

    DOI: 10.11421/jsces.2007.20070015

  109. Mao KURUMATANI, Kenjiro TERADA and Makoto HISADA:

    ON ANALYSIS MODELS OF REINFORCED CORROSION AND THEIR CRACK BEHAVIOR OF CONCRETE

    Doboku Gakkai Ronbunshuu A, 2007, Volume 63, Issue 1, Pages 167-178

    DOI: 10.2208/jsceja.63.167

  110. Ikumu WATANABE and Kenjiro TERADA:

    MULTI-SCALE ANALYSIS FOR POLYCRYSTALLINE METALS WITH CONTINUUM DAMAGE MODEL

    Doboku Gakkai Ronbunshuu A, 2006, Volume 62, Issue 4, Pages 772-781

    DOI: 10.2208/jsceja.62.772

  111. Tateki ISHII, Takashi KYOYA, Kenjiro TERADA and Yuji KISHIno:

    FAILURE ANALYSIS INVOLVING FRICTIONAL CONTACT ON CRACK INTERFACES

    Doboku Gakkai Ronbunshuu A, 2006, Volume 62, Issue 2, Pages 371-383

    DOI: 10.2208/jsceja.62.371

  112. Mao KURUMATANI and Kenjiro TERADA:

    Finite cover method with multi-cover modeling —Fracture simulation of quasi-brittle heterogeneous solids—

    Transactions of the Japan Society for Computational Engineering and Science, 2006, Volume 2006, Pages 20060029-20060029

    DOI: 10.11421/jsces2006.20060029

  113. Mao KURUMATANI and Kenjiro TERADA:

    A MULTI-SCALE HEAT CONDUCTION ANALYSIS METHOD FOR POROUS MEDIA IN CONSIDERATION OF MICROSCOPIC HEAT TRANSFER

    Doboku Gakkai Ronbunshuu A, 2006, Volume 62, Issue 4, Pages 822-834

    DOI: 10.2208/jsceja.62.822

  114. Mao KURUMATANI and Kenjiro TERADA:

    A MULTI-SCALE MULTI-PHYSICS ANALYSIS METHOD FOR MASS CONCENTRATION AND DEFORMATION PROBLEMS

    Doboku Gakkai Ronbunshuu A, 2006, Volume 62, Issue 2, Pages 425-439

    DOI: 10.2208/jsceja.62.425

  115. Mao KURUMATANI and Kenjiro TERADA:

    ON FINITE ELEMENT MESH CONNECTION METHODS FOR DOMAIN DECOMPOSITION PROBLEMS

    Doboku Gakkai Ronbunshuu A, 2006, Volume 62, Issue 2, Pages 345-361

    DOI: 10.2208/jsceja.62.345

  116. Mao KURUMATANI and Kenjiro TERADA:

    Examination of finite cover approximations for imposing interface compatibility conditions in generalized elements — A sort of patch tests —

    Transactions of the Japan Society for Computational Engineering and Science, Volume 2006, Pages 20060014-

    DOI: 10.11421/jsces2006.20060002

  117. Yasunori MAEDA, Shinji NISHIWAKI, Kazuhiro IZUI, Masataka YOSHIMURA, Kazumi MATSUI and Kenjiro TERADA:

    Topology Optimization of Mechanical Structures Targeting Vibration Characteristics

    Transactions of the Japan Society of Mechanical Engineers Series C, 2005, Volume 71, Issue 703, Pages 813-820

    DOI: 10.1299/kikaic.71.813

  118. Ikumu WATANABE and Kenjiro TERADA:

    A study on stress update algorithm and linearization scheme for single crystal plasticity

    Transactions of the Japan Society for Computational Engineering and Science, 2005, Volume 2005, Pages 20050014

    DOI: 10.11421/jsces.2005.20050014

  119. Tateki Ishii, Kenjiro Terada, Takashi Kyoya and Yuji Kishino:

    Development of fracture simulation by the finite cover method with interface element

    54rd NCTAM papers, National Congress of Theoretical and APage1sied Mechanics, Japan, 2005

    DOI: 10.11345/japannctam.54.0.212.0

  120. Mao KURUMATANI and Kenjiro TERADA:

    APPROXIMATION PROPATIES OF GENERALIZED ELEMENTS IN HIGHER-ORDER FINITE COVER APPROXIMATION

    Doboku Gakkai Ronbunshu, Volume 2005, Issue 794, Pages 794_131-794_142

    DOI: 10.2208/jscej.2005.794_131

  121. Masayoshi AKIYAMA, Kazumi MATSUI and Kenjiro TERADA:

    Analysis of Microscopic Yielding Behaviour of Carbon Steel under Macroscopic Loading

    Tetsu-to-Hagane, 2005, Volume 91, Issue 11, Pages 803-808

    DOI: 10.2355/tetsutohagane1955.91.11_803

  122. Ikumu WATANABE, Kenjiro TERADA, Kazumi MATSUI, Masayoshi AKIYAMA and Yutaka NSISHI:

    Evaluation of Induced Anisotropy in Polycrystalline Metals Based on Homogenization Method

    Transactions of the Japan Society of Mechanical Engineers Series A, 2004, Volume 70, Issue 699, Pages 1558-1565

    DOI: 10.1299/kikaia.70.1558

  123. Mitsuteru ASAI, Michihiro YAMAGISHI, Kenjiro TERADA and Gakuji NAGAI:

    A NON-LOCAL VOXEL FINITE ELEMENT METHOD AND ITS APPLICATION TO FAILUER ANALISES

    Doboku Gakkai Ronbunshu, 2004, Volume 2004, Issue 759, Pages 233-245

    DOI: 10.2208/jscej.2004.759_233

  124. Akira HOSOYAMA, Shinji NISHIWAKI, Kazuhiro IZUI, Masataka YOSHIMURA, Kazumi MATSUI and Kenjiro TERADA:

    Structural Topology Optimization of Compliant Mechanisms

    Transactions of the Japan Society of Mechanical Engineers Series C, 2004, Volume 70, Issue 696, Pages 2384-2391

    DOI: 10.1299/kikaic.70.2384

  125. Kai OIDE, Tsuyoshi ICHIMURA, Yoshiteru ISHIBASHI and Kenjiro TERADA:

    HIERRARCHICAL FINITE ELEMENTS FOR AVERAGE BEHAVIOR OF COMPOSITE STRUCTURE

    Doboku Gakkai Ronbunshu, 2003, Volume 2003, Issue 745, Pages 15-24

    DOI: 10.2208/jscej.2003.745_15

  126. Mitsuteru ASAI, Kenjiro TERADA, Kiyohiro IKEDA, Hiroyuki SUYAMA and Katashi FUJII:

    MESO-SCOPIC NUMERICAL ANALYSIS OF CONCRETE STRUCTURES BY A MODIFIDE LATTICE MODEL

    Doboku Gakkai Ronbunshu, 2003, Volume 2003, Issue 731, Pages 19-30

    DOI: 10.2208/jscej.2003.731_19

  127. Ken OOUE, Isao SAIKI, Kenjiro TERADA and Akinori NAKAJIMA:

    NONLINER MULTI-SCALE MODELING WITH FRAME ELEMENTS FOR CELLULAR MATERIALS

    Doboku Gakkai Ronbunshu, 2003, Volume 2003, Issue 724, Pages 249-256

    DOI: 10.2208/jscej.2003.724_249

  128. Yuki YAMAKAWA, Kiyohiro IKEDA, Kenjiro TERADA, Keisuke SATOH and Kunio TORII:

    FINITE DEFORMATION ANALYSIS FOR SHEAR BAND BIFURCATION MODE AND PROGRESS OF DISCONTINUOUS DISPLACEMENT FIELD

    Doboku Gakkai Ronbunshu, 2003, Volume 2003, Issue 743, Pages 59-76

    DOI: 10.2208/jscej.2003.743_59

  129. Isao SAIKI, Ken OOUE, Kenjiro TERADA and Akinori NAKAJIMA:

    Multi-Scale Analysis Of Cellular Materials with Frame Elements By Nonlinear Homogenization

    Transactions of the Japan Society of Mechanical Engineers Series A, 2003, Volume 69, Issue 680, Pages 786-793

    DOI: 10.1299/kikaia.69.786

  130. Kazumi MATSUI and Kenjiro TERADA:

    Topology Optimization Method by Continuous Apploximation of Material Distribution

    Transactions of the Japan Society of Mechanical Engineers Series A, 2003, Volume 69, Issue 684, Pages 1257-1264

    DOI: 10.1299/kikaia.69.1257

  131. Mao KURUMATANI and Kenjiro TERADA:

    APploximation properties of generalized elements in finite cover method

    Transactions of the Japan Society for Computational Engineering and Science, 2003, Volume 2003, Pages 20030027-

    DOI: 10.11421/jsces.2003.20030027

  132. Isao SAIKI, Ken OOUE, Akinori NAKAJIMA and Kenjiro TERADA:

    Multi-scale Modeling for Microstructures with Structural Elements and its APplication to Cellular Solids

    Transactions of the Japan Society for Computational Engineering and Science, 2002, Volume 2002, Pages 20020004-

    DOI: 10.11421/jsces.2002.20020004

  133. Kiho LEE, Motoki KAZAMA and Kenjiro TERADA:

    UNDRAINED SHER CHARACTERISTICS OF DREDGED SLUGES MIXED WITH CRASHED OYSTER SHELL

    Doboku Gakkai Ronbunshu, 2002, Volume 2002, Issue 701, Pages 303-314

    DOI: 10.2208/jscej.2002.701_303

  134. Yuuki YAMAKAWA, Kenjiro TERADA, Kiyohiro IKEDA and Kunio TORII:

    BIFURCATION ANALYSIS AND PATH JUMPING BEHAVIOR OF EASTO-PLASTIC BODY UNDER COMPRESSIION

    Doboku Gakkai Ronbunshu, 2002, Volume 2002, Issue 701, Pages 73-86

    DOI: 10.2208/jscej.2002.701_73

  135. Kai OIDE, Kiyohiro IKEDA, Kenjiro TERADA, Katashi FUJII and Shigenobu OKAZAWA:

    STOCHASTIC EVALUTION METHOD FOR THE STRENGTH OF STRUCTURAL MEMBERS BASED ON BIFURCATION THEORY

    Doboku Gakkai Ronbunshu, 2002, Volume 2002, Issue 696, Pages 85-98

    DOI: 10.2208/jscej.2002.696_85

  136. Kazumi MATSUI, Kenjiro TERADA, Masayoshi AKIYAMA, Takashi KUBOKI and Kenji OIKAWA:

    Mechanism of the Bauschinger Effect by the Multi-Scale Modeling

    Transactions of the Japan Society of Mechanical Engineers Series A, 2002, Volume 68, Issue 675, Pages 1559-1566

    DOI: 10.1299/kikaia.68.1559

  137. Kenji KANEKO, Kenjiro TERADA, Takashi KYOYA and Yuji KISHIno:

    DEVELOPMENT OF A MULTISCALE ANALYSIS METHOD FOR GRANULAR MATERIALS BASED ON HOMOGENIZATION THEORY

    Doboku Gakkai Ronbunshu, 2001, Volume 2001, Issue 680, Pages 183-199

    DOI: 10.2208/jscej.2001.680_183

  138. Kazumi MATSUI, Kenjiro TERADA, Takashi KYOYA and Tetsuo Iwakuma:

    ESTIMATE OF THE MACROSCOPIC YIELD SURFACE FOR THE ELASTIC-PLASTIC COMPOSITE MATERIAKS

    Doboku Gakkai Ronbunshu, 2001, Volume 2001, Issue 682, Pages 335-346

    DOI: 10.2208/jscej.2001.682_335

  139. Shigenobu OKAZAWA, Daiju TERASAWA, Kiyohiro IKEDA and Kenjiro TERADA:

    SHAPE EFFECTS OF NECKING BIFURCATION IN TENSILE STEEL SPECIMENTS

    Doboku Gakkai Ronbunshu, 2001, Volume 2001, Issue 675, Pages 351-354

    DOI: 10.2208/jscej.2001.675_351

  140. Takashi KYOYA and Kenjiro TERADA:

    A MULTISCALE STRUCTUAL ANALYSIS AND ITS APPLICATION TO A STRENGTH EVALUTION FOR FISSURED MEDIA

    Doboku Gakkai Ronbunshu, 2001, Volume 2001, Issue 680, Pages 49-64

    DOI: 10.2208/jscej.2001.680_49

  141. Naoki TAKANO, Kenjiro TERADA and Masaru ZAKO:

    Three-Dimensional Evaluation of Permeability of Fiber Reinforced Composite Materials Based on Their Microstructures

    Journal of the Society of Materials Science, Japan, 2001, Volume 50, Issue 5, Pages 488-494

    DOI: 10.2472/jsms.50.488

  142. Kazumi MATSUI, Kenjiro TERADA, Shinji NISHIWAKI and Yoshiteru ISHIBASHI:

    Consistent topology optimization method for structures with finite deformation

    Transactions of the Japan Society for Computational Engineering and Science, 2001, Volume 2001, Pages 20010046-

    DOI: 10.11421/jsces.2001.20010046

  143. Naoki TAKANO, Kenjiro TERADA, Masaru ZAKO and Tomomi YOSHIOKA:

    Evaluation of Permeability of Resin in Textile Composites by the Homogenization Method

    Journal of the Japan Society for Composite Materials, 2000, Volume 26, Issue 5, Pages 171-178

    DOI: 10.6089/jscm.26.171

  144. Kiho LEE, Motoki KAZAMA, Kenjiro TERADA and Eiji YANAGISAWA:

    PERMEBILITY CHARACTERISTICS OF DREDGED SLUGS MIXED WITH CRASHED OYSTER SHELL

    Doboku Gakkai Ronbunshu, 2000, Volume 2000, Issue 652, Pages 245-256

    DOI: 10.2208/jscej.2000.652_245

  145. Kenjiro TERADA, Kazumi MATSUI and Atsushi MANO:

    Micro-Macro Modeling of Nonlinear Mechanical Behaviors Based on the Homogenization Theory

    Transactions of the Japan Society of Mechanical Engineers Series A, 2000, Volume 66, Issue 643, Pages 516-523

    DOI: 10.1299/kikaia.66.516

  146. Kenjiro TERADA, Isao SAIKI and Kazumi MATSUI:

    Kinematically Correct Formulation for Two-Scale Finite Deformation Problems

    Transactions of the Japan Society for Computational Engineering and Science, 2000, Volume 2000, Pages 20000006-20000006

    DOI: 10.11421/jsces2000.20000006

  147. Takashi KYOYA, Kenjiro TERADA and Lizhu Oyang:

    EVALUTION OF DEFORMABILITY AND STRENGTH OF ROCK MASS USING PROPERTIES OF INTACT ROCKS AND DIGITAL IMAGE OF CRACK DISTRIBUTION

    Doboku Gakkai Ronbunshu, 1999, Volume 1999, Issue 631, Pages 131-150

    DOI: 10.2208/jscej.1999.631_131

  148. Kenjiro TERADA and Noboru KIKUCHI:

    A GENERALIZED ALGORITHM FOR MULTISCALE ANALYSIS OF HETEROGENEOUS ELASTIC-PLASTIC BODIES

    Doboku Gakkai Ronbunshu, 1999, Volume 1999, Issue 633, Pages 217-229

    DOI: 10.2208/jscej.1999.633_217

  149. Kenjiro TERADA and Takashi KYOYA:

    METHOD OF MULTISCALE STRESS ANALYSIS FOR A MEDIUM WITH INIFINITELY MANY FISSURES

    Doboku Gakkai Ronbunshu, 1999, Volume 1999, Issue 619, Pages 23-33

    DOI: 10.2208/jscej.1999.619_23

  150. Kenjiro TERADA and Kazumi MATSUI:

    Numerical Solutions of Multi-Scale Structural Analyses for Elastoplastic Bodies

    Transactions of the Japan Society for Computational Engineering and Science, 1999, Volume 1999, Pages 19990008-

    DOI: 10.11421/jsces.1999.19990008

  151. Katsuyuki SUZUKI, Hideomi OHTSUBO, Kenjiro TERADA and Daisuke KOBYASHI:

    Optimal Design of Golf Club Using Multibody Dynamics

    Transactions of the Japan Society for Computational Engineering and Science, 1999, Volume 1999, Pages 19990011-

    DOI: 10.11421/jsces.1999.19990011

  152. Kenjiro TERADA, Kazuyuki NAKARATA and Michihiro KITAHARA:

    An Evaluation Method of Macroscopic Shape of Defects in Microscopically Inhomogeneous Materials

    Transactions of the Japan Society of Mechanical Engineers Series A, 1998, Volume 65, Issue 631, Pages 552-559

    DOI: 10.1299/kikaia.65.552

  153. Kenjiro TERADA and Noboru KIKUCHI:

    Application of the Asymptotic Homogenization Method for Composites with Irregular Material Configurations

    Transactions of the Japan Society of Mechanical Engineers Series A, 1998, Volume 64, Issue 617, Pages 162-169

    DOI: 10.1299/kikaia.64.162

  154. Kenjiro TERADA, Takashi ITO and Noboru KIKUCHI:

    A STUDY ON THE HOMOGENIZATION METHOD FOR SOLID-FLUID MIXTURES FROM ENGINEERING VIEWPOINTS

    Doboku Gakkai Ronbunshu, 1998, Volume 1998, Issue 591, Pages 85-97

    DOI: 10.2208/jscej.1998.591_85

  155. Kenjiro TERADA and Noboru KIKUCHI:

    Microstructural Modeling Technique for Homogenization Analysis Using Digital images

    Transactions of the Japan Society of Mechanical Engineers Series A, 1998, Volume 64, Issue 617, Pages 170-177

    DOI: 10.1299/kikaia.64.170

  156. Kenjiro TERADA, Takashi ITO and noboru KIKUCHI:

    VISCOELASTIC CONSTITUTIVE LAW AS AN ASYMPTOTIC BEHAVIOR IN THE HOMOGENIZATION METHOD FOR SOLID-FLUID MIXTURES

    1998, Volume 1998, Issue 591, Pages 99-109, 10.2208/jscej.1998.591_99

    DOI: https://www.jstage.jst.go.jp/article/jscej1984/1998/591/1998_591_99/_article/-char/en

  157. Katsuyuki SUZUKI, Kenjiro TERADA, Hideomi OHTSUBO and Naoki YONESATO:

    The Analysis Method of Solid Structure Using Voxel Data

    Jornal of the Society of Naval Architects of Japan, 1997, Volume 1997, Issue 182, Pages 595-600

    DOI: 10.2534/jjasnaoe1968.1997.182_595

  158. Kenjiro TERADA, Kohei YUGE and Noboru KIKUCHI:

    Elastoplastic Analysis of Composite Materials Using the Homogenization Method: 2nd Report, Numerical Analysis

    Transactions of the Japan Society of Mechanical Engineers Series A, 1996, Volume 62, Issue 601, Pages 2072-2079

    DOI: 10.1299/kikaia.62.2072

  159. Kenjiro Terada, Kohei Yuge and Nobooru Kikushi:

    Elasto-Plastic Analysis of Composite Materials Using the Homogenization Method: 1st Report, Formulation

    Transactions of the Japan Society of Mechanical Engineers Series A, 1995, Volume 61, Issue 590, Pages 2199-2205

    DOI: 10.1299/kikaia.61.2199

  1. Mao KURUMATANI, Tatsuya YUMOTO, Kenjiro TERADA, Takashi KYOYA, Mitsuyoshi AKIYAMA:

    Study for evaluating fracture-toughness in quasi-brittle materials based on the energy valance of structures

    Journal of Applied Mechanics, 2010, Volume 13, Pages 313-322

    URL: http://library.jsce.or.jp/jsce/open/00561/2010/13-0313.pdf

  2. Takashi SASAGAWA, Mao KURUMATANI, Kenjiro TERADA, Tetsushi KANDA, Jin-Hwan JEON, Haruki MOMOSE:

    Strength evaluation of ultra high-strength cement paste by crack propagation analysis of microstructure

    Journal of Applied Mechanics, 2010, Volume 13, Pages 283-291

    URL: http://library.jsce.or.jp/jsce/open/00561/2010/13-0283.pdf

  3. Satoshi IWATA, Mao KURUMATANI, Kenjiro TERADA, Shigenobu OKAZAWA, Kazuo KASHIYAMA:

    Meso-scale dynamic fracture simulation of concrete in tension under high strain-rate

    Journal of Applied Mechanics, 2009, Volume 12, Pages 311-319

    URL: http://library.jsce.or.jp/jsce/open/00561/2009/12-0311.pdf

  4. Shigenobu OKAZAWA, Mao KURUMATANI, Hideyuki TERASAWA, Kenjiro TERADA, Kazuo KASHIYAMA:

    A study of large deformation solid dynamics using Eulerian finte cover method

    Journal of Applied Mechanics, 2009, Volume 12, Pages 195-203

    URL: http://library.jsce.or.jp/jsce/open/00561/2009/12-0195.pdf

  5. Tatsuya YUMOTO, Mao KURUMATANI, Masaki YAMADA, Kenjiro TERADA, Takashi KYOYA:

    A method for evaluating fracture energy of quasibrittle materials using cohesivecrack model

    Journal of Applied Mechanics, 2008, Volume 11, Pages 351-359

    DOI: 10.2208/journalam.11.351

  6. Ikumu WATANABE, Kenjiro TERADA:

    Veryfication study of micro-macro decoupling analysis on three dimentional plastic forming problem

    Journal of Applied Mechanics, 2008, Volume 11, Pages 123-131

    DOI: 10.2208/journalam.11.123

  7. Mao KURUMATANI, Kenjiro TERADA, Takashi KYOYA:

    Application of the explicit solution algorithm for cohesive crack model to three-dimensional crack propagation analysis of quasi-brittle materials

    Journal of Applied Mechanics, 2008, Volume 11, Pages 211-220

    DOI: 10.2208/journalam.11.211

  8. Mao KURUMATANI, Satoshi IWATA, Kenjiro TERADA, Shigenobu OKAZAWA, Kazuo KASHIYAMA:

    A method of dynamic fracture analysis for quasi-brittle materials by means of cohesive crack model

    Journal of Applied Mechanics, 2008, Volume 11, Pages 201-209

    DOI: 10.2208/journalam.11.201

  9. Tateki ISHII, Takashi KYOYA, Kenjiro TERADA:

    Effects of Frictional Slip between Crack Interfaces to Crack Growth in Quasi-brittle Solids

    Journal of Applied Mechanics, 2007, Volume 10, Pages 343-350

    DOI: 10.2208/journalam.10.343

  10. Eduardo Alberto de Souza Neto, Djordje PERIC, Ikumu WATANABE, Kenjiro TERADA:

    The importance of finite element performance for characterizing the macroscopic material behavior with two-scale finite element analysis for polycrystalline metals

    Journal of Applied Mechanics, 2007, Volume 10, Pages 167-174

    DOI: 10.2208/journalam.10.167

  11. Mao KURUMATANI, Kenjiro TERADA:

    Image-based nodal-integration finite element method for non-linear analyses of composite materials

    Journal of Applied Mechanics, 2007, Volume 10, Pages 91-100

    DOI: 10.2208/journalam.10.91

  12. Tateki ISHII, Takashi KYOYA, Naoki NISHIZAWA, Kenjiro TERADA:

    Multiscale analysis method for quasi-brittle heterogeneous materials involving micro-crack propagations

    Journal of Applied Mechanics, 2006, Volume 9, Pages 273-282

    DOI: 10.2208/journalam.9.273

  13. Mao KURUMATANI, Masahiro ISHIHATA, Tateki ISHII, Kenjiro TERADA:

    Analysis of crack-paths in concrete due to reinforcement corrosion and their underlying mechanism

    Journal of Applied Mechanics, 2006, Volume 9, Pages 185-194

    DOI: 10.2208/journalam.9.185

  14. Masaki YAMADA, Hiroyuki MIYAKOSHI, Kenjiro TERADA:

    Development of numerical simulator by coupled electro-mechanical analysis of ultrasonic piezoelectric transducer

    Journal of Applied Mechanics, 2006, Volume 9, Pages 1121-1129

    DOI: 10.2208/journalam.9.1121

  15. Ikumu WATANABE, Kenjiro TERADA:

    Decoupled micro-macro analysis method for two-scale BVPs in nonlinear homogenization theory

    Journal of Applied Mechanics, 2005, Volume 8, Pages 277-285

    DOI: 10.2208/journalam.8.277

  16. Tateki ISHII, Kenjiro TERADA, Takashi KYOYA, Yuji KISHINO, Mao KURUMATANI:

    An application of discontinuous Galerkin finite cover method to discontinuous deformation analysis

    Journal of Applied Mechanics, 2005, Volume 8, Pages 327-334

    DOI: 10.2208/journalam.8.327

  17. Mao KURUMATANI, Kenjiro TERADA:

    Development of discontinuous Galerkin finite cover method and its evaluation

    Journal of Applied Mechanics, 2005, Volume 8, Pages 215-224

    DOI: 10.2208/journalam.8.215

  18. Ikumu WATANABE, Atsushi MARUYAMA, Kenjiro TERADA, Masayoshi AKIYAMA:

    Evaluation of grain effects by multi-scale modeling based on homogenization method for polycrystalline metals

    Journal of Applied Mechanics, 2004, Volume 7, Pages 365-371

    DOI: 10.2208/journalam.7.365

  19. Mao KURUMATANI, Kenjiro TERADA:

    Three-dimensional finite cover method with interface elements

    Journal of Applied Mechanics, 2004, Volume 7, Pages 441-450

    DOI: 10.2208/journalam.7.441

  20. Mao KURUMATANI, Mitsuteru ASAI, Kenjiro TERADA:

    Application of the finite cover method to elastic-plastic problems and its evaluation

    Journal of Applied Mechanics, 2003, Volume 6, Pages 247-256

    DOI: 10.2208/journalam.6.247

  21. Ikumu WATANABE, Kenjiro TERADA, Kazumi MATSUI, Masayoshi AKIYAMA, Yutaka NEISHI:

    Multi-scale analysis for polycrystalline metals

    Journal of Applied Mechanics, 2003, Volume 6, Pages 239-246

    DOI: 10.2208/journalam.6.239

  22. Mitsuteru ASAI, Kenjiro TERADA:

    An analysis of propagationg discontinuities by the finite cover method

    Journal of Applied Mechanics, 2003, Volume 6, Pages 193-200

    DOI: 10.2208/journalam.6.193

  23. Tateki ISHII, Kenjiro TERADA, Takashi KYOYA, Michihiro YAMAGISHI, Yuji KISHINO:

    Global-local analysis with interface element using voxel model for local heterogeneous structures

    Journal of Applied Mechanics, 2003, Volume 6, Pages 141-150

    DOI: 10.2208/journalam.6.141

  24. Isao SAIKI, Shigeri KANKE, Akinori NAKAJIMA, Kenjiro TERADA:

    Study on Multi-scale Modeling of Plasticity by Atomic Model

    Journal of Applied Mechanics, 2003, Volume 6, Pages 123-130

    DOI: 10.2208/journalam.6.123

  25. Kohei HIGUCHI, Tetsuo IWAKUMA, Takashi KYOYA, Kenjiro TERADA:

    A finite element of composites in plane strain using an analytic averaging method

    Journal of Applied Mechanics, 2003, Volume 6, Pages 107-116

    DOI: 10.2208/journalam.6.107

  26. Kai OIDE, Kenjiro TERADA, Tsuyoshi ICHIMURA:

    Applicability of dual-Schur mortar method to incompatible meshes with different element sizes and materials

    Journal of Applied Mechanics, 2003, Volume 6, Pages 175-184

    DOI: 10.2208/journalam.6.175

  27. Tsuyoshi ICHIMURA, Muneo HORI, Kenjiro TERADA, Takahiro YAMAKAWA:

    Development of Prototype of Integrated Earthquake Disaster Simulator

    Journal of Applied Mechanics, 2003, Volume 6, Pages 615-622

    DOI: 10.2208/journalam.6.615

  28. Tsuyoshi ICHIMURA, Kai OIDE, Kenjiro TERADA, Muneo HORI:

    Development of Dynamic Structure Analysis Method based on Multi-Scale Analysis

    Journal of Applied Mechanics, 2002, Volume 5, Pages 535-541

    DOI: 10.2208/journalam.5.535

  29. Kazumi MATSUI, Kenjiro TERADA, Masayosh AKIYAMA, Takashi KUBOKI, Keiichi KUSAKA, Kenji OIKAWA:

    Influence of the micro-structure of carbon steel on the yield stress and the properties of strain hardening

    Journal of Applied Mechanics, 2002, Volume 5, Pages 175-183

    DOI: 10.2208/journalam.5.175

  30. Mitsuteru ASAI, Kenjiro TERADA:

    Multi-scale evaluation method for the strength of heterogeneous brittle materials by means of the material instability theory

    Journal of Applied Mechanics, 2002, Volume 5, Pages 217-226

    DOI: 10.2208/journalam.5.217

  31. Kazumi MATSUI, Kenjiro TERADA:

    The multi-scale computation method for elastic-plastic heterogeneous bodies with interfacial debounding

    Journal of Applied Mechanics, 2002, Volume 5, Pages 227-234

    DOI: 10.2208/journalam.5.227

  32. Shigeri KANKE, Isao SAIKI, Akinori NAKAJIMA, Kenjiro TERADA, Kiyohiro IKEDA:

    Multi-scale modeling of discrete systems with potential function

    Journal of Applied Mechanics, 2002, Volume 5, Pages 167-173

    DOI: 10.2208/journalam.5.167

  33. Mitsuteru ASAI, Kenjiro TERADA, Kiyohiro IKEDA, Michihiro YAMAGISHI:

    Development of Hybrid-FCM and its application to the analysis of interface fracture in multi-phase materials

    Journal of Applied Mechanics, 2001, Volume 4, Pages 85-94

    DOI: 10.2208/journalam.4.85

  34. Ken OOUE, Isao SAIKI, Akinori NAKAJIMA, Kenjiro TERADA:

    Multi-scale Modeling for Celluar Solids with Frame Element

    Journal of Applied Mechanics, 2000, Volume 3, Pages 185-192

    DOI: 10.2208/journalam.3.185

  35. Isao SAIKI, Kenjiro TERADA, Muneo HORI, Kiyohiro IKEDA:

    Estimate of Microstructural Periodicity in Multi-scale Modeling for Macroscopic Material Instability Based on the Block-diagonalization Method

    Journal of Applied Mechanics, 2000, Volume 3, Pages 37-45

    DOI: 10.2208/journalam.3.37

  36. Takashi KYOYA, Kenjiro TERADA, Lizhu OYANG, Hidetoshi NISHIOKA:

    On Evaluation of the Mechanical Property of Composite Material by the Homogenization Method

    Journal of Applied Mechanics, 1999, Volume 2, Pages 449-458

    DOI: 10.2208/journalam.2.449

  37. Isao SAIKI, Kenjiro TERADA, Kiyohiro IKEDA:

    Micro-scale Problems with Buckling for Multi-scale Analyses of Cellular Solids

    Journal of Applied Mechanics, 1999, Volume 2, Pages 287-294

    DOI: 10.2208/journalam.2.287

  38. Tomonori SUGANO, Mitsuteru ASAI, Kiyohiro IKEDA, Kenjiro TERADA, Kenshi ODA:

    Stochastic Evaluation Method for Elastic Buckling Strength of Truss Structures

    Journal of Applied Mechanics, 1999, Volume 2, Pages 37-42

    DOI: 10.2208/journalam.2.37

  39. Katsuyuki SUZUKI, Hideomi OHTUBO, Kenjiro TERADA, Seungjae MIN, Chuanrong JIN, Katsuyoshi NAKANISHI:

    The Meshless Analysis of Solid Structure Using Voxel Cover

    Journal of Applied Mechanics, 1998, Volume 1, Pages 215-222

    DOI: 10.2208/journalam.1.215

  40. Tomoyuki UO, Kazuo KASHIYAMA, Kenjiro TERADA:

    Visco-elastic Analysis of Asphalt Concrete based on Homogenization Theory using Laplace Transform

    Journal of Applied Mechanics, 1998, Volume 1, Pages 195-202

    DOI: 10.2208/journalam.1.195

  41. Takashi KYOYA, Kenjiro TERADA:

    Application of the Homogenization Method to Beam Member with Periodic Structures

    Journal of Applied Mechanics, 1998, Volume 1, Pages 185-194

    DOI: 10.2208/journalam.1.185

  42. Kenjiro TERADA, Muneo HORI, Takashi KYOYA:

    Multi-scale Analysis Modelling for Heterogeneous Media

    Journal of Applied Mechanics, 1998, Volume 1, Pages 177-184

    DOI: 10.2208/journalam.1.177

  43. Isao SAIKI, Shinya MURAKAMI, Ikuo SANO, Kiyohiro IKEDA, Kenjiro TERADA:

    Image Analysis of Shear Bands on Kaolin by Bifurcation Theory

    Journal of Applied Mechanics, 1998, Volume 1, Pages 15-22

    DOI: 10.2208/journalam.1.15

  1. Mayu Muramatsu, Tatsuya Kawada, Kenjiro Terada:

    A Simulation of Ferroelastic Phase Formation by Using Phase Field Model

    Key Engineering Materials, Volume 725, Pages 208-213, December 2016

    DOI: 10.4028/www.scientific.net/KEM.725.208

  2. Yuichi Shintaku, Mayu Muramatsu, Shinsuke Takase, Seiichiro Tsutsumi, Kenjiro Terada:

    Cohesive Crack Model to Reflect Local Chemical Action at Grain and Its Boundaries in Polycrystalline Metals

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 2015, Volume 33, Issue 2, Pages 152s-155s

    DOI: 10.2207/qjjws.33.152s

  3. Seiichiro Tsutsumi, Riccardo Fincato, Kazushi Ueda, Kenjiro Terada:

    A Crystal Plasticity FE Analysis Considering Mechanically Induced Martensitic Phase Transformation

    QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 2015, Volume 33, Issue 2, Pages 102s-106s

    DOI: 10.2207/qjjws.33.102s

  4. Jae Seok Choi, Jeonghoon Yoo, Shinji Nishiwaki and Kenjiro Terada:

    Comparison of Homogenization Techniques in Magnetostatic Field Problems

    Transactions of The Korean Society of Mechanical Engineers A, Vol. 31, pp. 388-394, 2007

    DOI: 10.3795/KSME-A.2007.31.3.388

  5. Young Seok Lim, Seungjae Min, Jeonghoon Yoo, Kenjiro Terada and Shinji Nishiwaki:

    Comparative Studies of Topology Optimization Using Continuous Approximation of Material Distribution

    Transactions of the Korean Society of Mechanical Engineers - A, Vol. 30, No. 2, pp. 164-170, 2006

    URL: http://www.dbpia.co.kr/Article/NODE00670871

  6. Muneo HORI, Tsuyoshi ICHIMURA, Kenjiro TERADA:

    ON STANDARDIZATION OF VARIOUS EARTHQUAKE RESISTANCE DESIGN CODES FOR IMPROVING GOVERNMENT ENGINEERING ABILITY

    SOCIOTECHNICA, 2004, Volume 2, Pages 444-454

    DOI: 10.3392/sociotechnica.2.444

  7. Muneo HORI, Tsuyoshi ICHIMURA, Kenjiro TERADA:

    ON GENERATION AND CONVEY OF EARTHQUAKE INFORMATION FOR PROMOTING EARTHQUAKE DISASTER PREVENTION

    SOCIOTECHNICA, 2003, Volume 1, Pages 367-373

    DOI: 10.3392/sociotechnica.1.367

  8. ICHIMURA TSUYOSHI, TERADA KENJIRO, HORI MUNEO and YAMAKAWA TAKAHIRO:

    震災情報高度化を目指した統合震災シミュレーター開発のための基礎研究

    Proceedings of Japan Conference on Structural Safety and Reliability, Volume: 5, Pages: 17-24, Publication year: Nov. 14, 2003

    URL: https://jglobal.jst.go.jp/en/detail?JGLOBAL_ID=200902270700230685

  1. Mayu Muramatsu, Haruo Kishimoto, Katsuhiro Yamaji, Keiji Yashiro, Tatsuya Kawada, Kenjiro Terada and Harumi Yokokawa:

    Electro-chemical potential analysis of zirconium based on the reaction-diffusion equations of oxygen ion and electron considering phase transformation

    ECS Trans., Vol. 68, No. 1, pp. 2363-2372, 2015

    DOI: 10.1149/06801.2363ecst

  2. Kenjiro Terada, Tatsuya Kawada, Kazuhisa Sato, Fumitada Iguchi, Keiji Yashiro, Koji Amezawa, Momoji Kubo, Hiroo Yugami, Toshiyuki Hashida, Junichiro Mizusaki, Hideki Watanabe, Takashi Sasagawa and Hiroki Aoyagi:

    Multiscale simulation of electro-chemo-mechanical coupling behavior of PEN structure under SOFC operation

    ECS Trans., Vol. 35, No. 1, pp. 923-933, 2011

    DOI: 10.1149/1.3570073

  3. Mao Kurumatani:

    A method of multi-physics multi-scale analysis of deterioration of concrete materials

    Proceedings of the Third International Structural Engineering and Construction Conference, pp. 253-260, 2005

  4. Kenjiro Terada and Mitsuteru Asai:

    Finite cover method for physically and geometrically nonlinear problems

    Proceedings of the Second International Workshop Meshfree Methods for Partial Differential Equations, pp. 169-190, 2004

  5. Ikumu Watanabe and Kenjiro Terada:

    Two-scale characterization of deformation-induced anisotropy of polycrystalline metals

    Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes, pp. 1595-1600, 2004

  6. Kiho Lee, Motoki Kazama, Eiji Yanagisawa and Kenjiro Terada:

    Permeability characteristics of dredged sludges mixed with crushed oyster shells

    Proceedings of the International Symposium – IS-Yokohama 2000, pp. 63-66, 2000

  7. Kazumi Matsui, Kenjiro Terada, Takashi Kyoya and Tetsuo Iwakuma:

    A priori estimate of macroscopic material responses of heterogeneous elastic-plastic body

    Proceedings of the Advances in Computational Engineering and Sciences, pp. 1104-1109, 2000

  8. Naoki Takano, Kenjiro Terada, Masaru Zako and Tomomi Yoshioka:

    Microstructural analysis of three-dimensional permeabilities of textile composites by the homogenization theory

    Proceedings of the Third Joint Canada-Japan Workshop on Composites, pp. 381-386, 2000

  9. Takashi Kyoya, Kenjiro Terada and Yuji Kishino:

    Limit load analysis of rock mass structures combined with a homogenization method

    Proceedings of IS-Nagoya, pp. 337-342, 1997

  10. Takashi Kyoya, Kenjiro Terada, Yuji Kishino and Toshikazu Kawamoto:

    Stability analysis of rock mass structures based on a homogenization method and a limit load analysis

    Proceedings of the Ninth International Conference on Computer Methods and Advances in Geomechanics, pp. 337-342, 1997

  11. Hideomi Ohtsubo, Katsuyuki Suzuki, Kenjiro Terada and Katsuyoshi Nakanishi:

    Utilization of finite covers in the manifold method for accuracy control

    Proceedings of the Second International Conference on Analysis of Discontinuous Deformation, pp. 317-322, 1997

  12. Kenjiro Terada, Tomohiko Miura and Noboru Kikuchi:

    Digital image-based modeling applied to the homogenization analysis of inetermetallic composites

    Proceedings of Localized Damage IV, pp. 401-408, 1996

  13. Kenjiro Terada and Noboru Kikuchi:

    Elasto-plastic analysis of composite materials by the homogenization method

    Proceedings of the Fifth International Symposium on Plasticity and Its Current Applications, pp. 923-926, 1995

  14. Kenjiro Terada and Noboru Kikuchi:

    Nonlinear homogenization method for practical applications

    American Society of Mechanical Engineers, Applied Mechanics Division, AMD, Vol. 212, pp. 1-16, 1995

    URL: https://www.researchgate.net/publication/279600278_Nonlinear_homogenization_method_for_practical_applications

  15. Kenjiro Terada and Noboru Kikuchi:

    Nonlinear homogenization method for practical applications

    Proceedings of 1995 ASME International Mechanical Engineering Congress and Exposition, pp. 1-16, 1995

Articles
  1. Kenjiro Terada, Mao Kurumatani :

    Finite Element Analysis Learned with Examples

    Morikita, 2021.

    ISBN: 978-4-627-48661-4

    URL: https://www.morikita.co.jp/books/mid/048661

    Link to Amazon.co.jp

  2. Kenjiro Terada, Norio Hirayama and Koji Yamamoto:

    Numerical Material Testing -Multiscale Analysis by Finite Element Method-

    Maruzen Publishing, 2021.

    ISBN: 978-4-621-30633-8

    URL: https://www.maruzen-publishing.co.jp/item/b304274.html

    Link to Amazon.co.jp

  3. Norio Tekeuchi, Kazuo Kashiyama and Kenjiro Terada:

    Computational Mechanics -Fundamentals of Finite Element Methods-

    The Japan Society for Computational Engineering and Science (Ed.), Morikita, 2012.

    ISBN: 978-4-627-91802-3

    URL: https://www.morikita.co.jp/books/book/2371

    Link to Amazon.co.jp

  4. Kenjiro Terada and Noboru Kikuchi:

    Introduction to Homogenization Method

    The Japan Society for Computational Engineering and Science (Ed.), Maruzen, 2003.

    ISBN: 978-4-621-07256-1

    URL: https://www.maruzen-publishing.co.jp/item/b292868.html

    Link to Amazon.co.jp

  1. 正彦 森永 , 忠 古原 and 裕之 戸田 :

    金属材料の加工と組織

    共立出版, 2010.

    全206ページ中,pp.1-35: 第1章「材料のマクロな変形挙動」(寺田賢二郎・中山栄浩)を共同執筆(書籍内に執筆担当箇所の記載なし)

    ISBN: 978-4-320-08164-2

    URL: https://www.kyoritsu-pub.co.jp/bookdetail/9784320081642

    Link to Amazon.co.jp

  2. 計算力学小委員会土木学会応用力学委員会:

    いまさら聞けない 計算力学の常識

    丸善, 2008.

    全347ページのうち,第1話(pp.1-16):「計算力学と離散化手法」(西村直志・樫山和男・阿部和久・寺田賢二郎)を共同執筆, 第2話(pp.17-30):「要素やメッシュで答えが変わる!」(車谷麻緒・寺田賢二郎)を共同執筆, 第3話(pp.31-50):「要素のからくり!」(寺田賢二郎・冨山潤)を共同執筆, 第4話(pp.51-67):「ロッキングとその逃れ方」(寺田賢二郎・渡邊育夢・岡澤重信)を共同執筆, 第9話(pp.141-153):「固体の非線形解析における二つの論点」(寺田賢二郎)を単独執筆

    ISBN: 978-4-621-08022-1

    URL: https://www.maruzen-publishing.co.jp/item/b293599.html

    Link to Amazon.co.jp

  3. 元基 矢川 and 則幸 宮崎 :

    計算力学ハンドブック

    朝倉書店, 2007.

    全22章(662ページ)のうち16.3節(pp.477-491): 「マルチスケール解析」(寺田賢二郎)を単独執筆

    ISBN: 978-4-254-23112-0

    URL: http://www.asakura.co.jp/books/isbn/978-4-254-23112-0/

    Link to Amazon.co.jp

  1. Seishiro Matsubara and Kenjiro Terada:

    A Viscoelastic-Viscoplastic Combined Constitutive Model for Thermoplastic Resins

    E. Oñate et al. (Ed.), Springer International Publishing, 2018.

    ISBN: 978-3-319-60885-3

    URL: https://doi.org/10.1007/978-3-319-60885-3_12

    Link to Amazon.co.uk

  2. Reika Nomura, Kenjiro Terada, Shinsuke Takase and Shuji Moriguchi:

    A Method of Numerical Viscosity Measurement for Solid-Liquid Mixture

    J. Sorić et al. (Ed.), Springer International Publishing, 2018.

    ISBN: 978-3-319-65463-8

    URL: https://doi.org/10.1007/978-3-319-65463-8_17

    Link to Amazon.co.uk

  3. Kenjiro Terada, Ikumu Watanabe, Masayoshi Akiyama, Shigemitsu Kimura and Kouichi Kuroda:

    A Homogenization-Based Prediction Method of Macroscopic Yield Strength of Polycrystalline Metals Subjected to Cold-Working

    John Wiley & Sons, Ltd, 2010.

    ISBN: 978-3-527-63231-2

    URL: https://onlinelibrary.wiley.com/doi/abs/10.1002/9783527632312.ch10

    Link to Amazon.co.uk

  4. Kenjiro Terada and Mitsuteru Asai:

    Finite Cover Method for Physically and Geometrically Nonlinear Problems

    M. Griebel and M. A. Schweitzer (Ed.), Springer Berlin Heidelberg, 2005.

    ISBN: 978-3-540-27099-7

    URL: https://www.springer.com/la/book/9783540230267

  5. Kenjiro Terada and Noboru Kukuchi:

    Constitutive Modeling for Fluid-Saturated Porous Solid by the Asymptotic Homogenization Method

    M. Zaman et al. (Ed.), John Wiley & Sons, 2000.

    ISBN: 978-0-471-49218-4

    URL: https://www.wiley.com/en-us/Modeling+in+Geomechanics-p-9780471492184

    Link to Amazon.co.uk

  1. 寺田賢二郎(監訳)

    非線形有限要素法-弾塑性解析の理論と実践-

    Eduardo A. de Souza Neto, Djordje Peric and David R. J. Owen (原著), 森北出版, 2012.

    ISBN: 978-4-627-92021-7

    URL: https://www.morikita.co.jp/books/book/2394

    Link to Amazon.co.jp

  1. 山口裕矢, 森口周二, 寺田賢二郎:

    固液混合MPMによる地盤構造物の流動化シミュレーション

    シミュレーション,財団法人日本シミュレーション学会, Vol. 39, No. 2

    URL: https://www.jsst.jp/journal/contents/vol39.html

  2. 堤成一郎, Riccardo Fincato, 寺田賢二郎:

    結晶塑性と加工誘起マルテンサイト変態を考慮した非線形有限要素解析

    溶接学会誌, Vol. 86, No. 6, pp. 443-447, 2017

    DOI: 10.2207/jjws.86.443

  3. 寺田賢二郎:

    均質化法を用いた複合材料の解析 (特集 マルチスケールシミュレーション)

    成形加工 = Journal of the Japan Society of Polymer Processing : プラスチック成形加工学会誌, Vol. 29, No. 2, pp. 42-46, 2017

    URL: https://ci.nii.ac.jp/naid/40021083035

  4. 寺田賢二郎:

    計算力学における非線形シミュレーションの研究動向

    Mech D&A News, Mechanical Design & Analysis Co., Vol. 2016, pp. 1-12, 2016

  5. 寺田賢二郎, 村松眞由:

    結晶塑性モデルによるDP鋼の成形限界特性評価 (特集 材料科学におけるシミュレーション技術の活用)

    金属, Vol. 85, No. 11, pp. 908-914, 2015

    URL: https://ci.nii.ac.jp/naid/40020630021

  6. 寺田賢二郎:

    非線形CAEの研究動向と材料モデリング

    Mech D&A News, Mechanical Design & Analysis Co., Vol. 2010-1, pp. 1-7, 2010

  7. 寺田賢二郎:

    CAEソフトウェアから力学を学ぶ「数値実験による設計とCAEの力学講座」

    サイバネットシステム株式会社, No. 131, pp. 22-23, 2010

  8. 平山紀夫, 寺田賢二郎:

    数値材料試験による異方性非線形材料特性の算出(1)

    CAEのあるものづくり,サイバネットシステム, Vol. 10, pp. 10-12, 2009

    URL: http://www.cybernet.co.jp/ansys/download/mn/200903/mcmnp200903-0006.html

  9. 寺田賢二郎, 平山紀夫:

    数値材料試験による異方性非線形材料特性の算出(2)

    CAEのあるものづくり,サイバネットシステム, Vol. 11, pp. 10-13, 2009

    URL: http://www.cybernet.co.jp/ansys/download/mn/200909/mcmnp200909-0014.html

  10. 寺田賢二郎:

    鉄鋼材料の微視的非均質性と巨視的機械的性質の相互関係の理解

    塑性と加工, Vol. 49, No. 564, pp. 13-18, 2008

    DOI: 10.9773/sosei.49.13

  11. 平山紀夫, 寺田賢二郎:

    数値材料試験による異方性非線形材料特性の算出~Hillの異方性塑性パラメーターの同定~

    CAEのあるものづくり,サイバネットシステム, Vol. 9, pp. 12-14, 2008

    URL: http://www.cybernet.co.jp/ansys/product/lineup/multiscale/relation/mono009.html

  12. 寺田賢二郎:

    複合材料の数値材料実験のススメ(その1)等価物性と均質化法

    強化プラスチックス, Vol. 53, No. 4, pp. 205-210, 2007

    URL: https://ci.nii.ac.jp/naid/40015446349

  13. 寺田賢二郎:

    複合材料の数値材料実験のススメ(その2)数値材料実験の理論と実際:線形弾性体編

    強化プラスチックス, Vol. 53, No. 5, pp. 246-252, 2007

    URL: https://ci.nii.ac.jp/naid/40015484782

  14. 寺田賢二郎:

    複合材料の数値材料実験のススメ(その3)数値材料実験の理論と実際:伝熱と浸透流編

    強化プラスチックス, Vol. 53, No. 6, pp. 277-286, 2007

    URL: https://ci.nii.ac.jp/naid/40015527413

  15. 寺田賢二郎:

    ANSYSを利用したマルチスケールCAE~ANSYSを利用した数値材料試験~

    CAEのあるものづくり,サイバネットシステム, Vol. 5, pp. 9-10, 2006

    URL: http://www.cybernet.co.jp/ansys/product/lineup/multiscale/relation/mono005.html

  16. 寺田賢二郎:

    均質化法とその工学的応用 : ミクロとマクロのCAEツールとして(計算力学・工学におけるマルチスケールモデリング,<特集>理学と工学,科学と技術をつなぐマルチスケールモデリング)

    日本機械学会誌, Vol. 108, No. 1043, pp. 802-804, 2005

    DOI: 10.1299/jsmemag.108.1043_802

  17. 寺田賢二郎:

    3・5 マルチスケール解析(3.計算力学,<特集>機械工学年鑑)

    日本機械学会誌, Vol. 107, No. 1029, pp. 592, 2004

    DOI: 10.1299/jsmemag.107.1029_592_1

  18. 堀宗朗, 寺田賢二郎, 京谷孝史, 金子賢治:

    土の構造とメカニックス-ミクロからマクロへ : 5. 地盤力学におけるマイクロメカニックスとマクロメカニックスの関係(その2)

    土と基礎 = Soil mechanics and foundation engineering, Vol. 51, No. 1, pp. 31-36, 2003

    URL: https://ci.nii.ac.jp/naid/110003889710

  19. 寺田賢二郎:

    ミクロからマクロを予測する(<特集>計算力学の最前線)

    土木学会誌, Vol. 88, No. 8, pp. 23-24, 2003

    URL: https://www.jsce.or.jp/journal/thismonth/200308/index.htm

  20. 寺田賢二郎:

    有限要素法の一般化と有限被覆法(<特集>fixed gridによる数値解析)

    計算工学会誌, Vol. 8, No. 4, pp. 783-787, 2003

    URL: https://www.jsces.org/activity/journal/2003.html

  21. 斉木功, 寺田賢二郎:

    非均質構造材料のマルチスケールモデリング(<特集>マルチスケール法)

    計算工学会誌, Vol. 6, No. 4, pp. 361-363, 2001

    URL: https://www.jsces.org/activity/journal/2001.html

  22. 寺田賢二郎:

    企画趣旨(<特集>マルチスケール法)

    計算工学会誌, Vol. 6, No. 4, pp. 360, 2001

    URL: https://www.jsces.org/activity/journal/2001.html

  23. 寺田賢二郎:

    計算力学のエッセンス -有限要素法を中心として-

    土木学会誌, Vol. 85, No. 8, pp. 30-34, 2000

    URL: https://www.jsce.or.jp/journal/thismonth/200008.htm

InvitedTalks and Awards
  1. Plenary Speaker: Recent advances in FEMs and MPMs for Disaster Simulations

    Kenjiro Terada, Shuji Moriguchi, Yuya Yamaguchi and Shun Suzuki

    XVI International Conference on Computational Plasticity. Fundamentals and Applications - COMPLAS 2021, Barcelona, Spain(Online), September 7-10, 2021

  2. Invited Speaker: PCA-based computational homogenization for nonlinear elasticity

    Ryo Hatano, Seishiro Matsubara, Shuji Moriguchi and Kenjiro Terada

    Computational Modeling of Complex Materials across the Scales (CMCS), Glasgow, UK, October, 2019

  3. Invited Speaker: Two-scale viscoelastic analysis of FRP in consideration of dependence of resin's properties on degree of cure

    Risa Saito, Yuya Yamaguchi, Shuji Moriguchi, Yasuko Mihara, Takaya Kobayashi and Kenjiro Terada

    The Future of Materials Engineering - Dramatic Innovation to the next 100 years, International Symposium, Rutsubo Hall & Department of Materials Science, Aobayama Campus, Tohoku University, Sendai, Japan, June, 2019

  4. Invited Lecture: Multi-scale and multi-physics simulations for heterogenous materials and structures

    The Art of Modeling in Computational Solid Mechanics, Centre International des Sciences and Méchanques (CISM), Udine, Italy, October, 2019

  5. Plenary Speaker: Exploration of predictive disaster simulations by FEM and MPM

    Yuya Yamaguchi, Shun Suzuki, Shuji Moriguchi and Kenjiro Terada

    XV International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS 2019), Barcelona, Spain, September, 2019

  6. Semi-Plenary Speaker: Simulations of multi-stage failure phenomena in slope disasters

    Kenjiro Terada, Shuji Moriguchi, Shun Suzuki and Yuya Yamaguchi

    6th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) (ECCM 6) and the 7th European Conference on Computational Fluid Dynamics (ECFD 7), Glasgow, UK, June, 2018

  7. Plenary Speaker: Enhancing microstructural analyses in computational homogenization

    Kenjiro Terada, Seishiro Matsubara, Shinnosuke Nishi, Masayasu Kishi and Mayu Muramatsu

    ECCOMAS Thematic Conference on Computational modeling of Complex Materials across the Scales (CMCS 2017), Paris, France, November, 2017

  8. Plenary Speaker: Two-scale characterization of fiber-reinforced polymers with self-heating effect

    Kenjiro Terada, Seishiro Matsubara, Masayasu Kishi and Mayu Muramatsu

    XIV International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS XIII), Technical University of Catalonia (UPC), Vertex Building, Barcelona, Spain, September, 2017

  9. Invited Speaker: Numerical plate testing for composite plates

    Kenjiro Terada, Norio Hirayama, Koji Yamamoto and Seishiro Matsubara

    EUROMECH Colloquium 559 "Multi‐scale computational methods for bridging scales in materials and structures", Eindhoven, The Netherlands, February, 2015

  10. Keynote Speaker: Two-scale analysis of composite plates with in-plane periodic heterogeneities

    Kenjiro Terada, Seishiro Matsubara and Norio Hirayama

    1st Pan-American Congresses on Computational Mechanics- PANACM, Buenos Aires, Argentina, April, 2015

  11. Plenary Speaker: Numerical material and plate tests: advantages and challenges

    Kenjiro Terada, Seishiro Matsubara and Shinnosuke Nishi

    XIII International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS XIII), Technical University of Catalonia (UPC), Vertex Building, Barcelona, Spain, September, 2015

  12. Plenary Speaker: Multi-scale computations diversified: From material to disaster sciences

    Kenjiro Terada, Shinsuke Takase, Junji Kato, Shuji Moriguchi and Takashi Kyoya

    11th World Congress on Computational Mechanics (WCCM XI) combined with 5th. European Conference on Computational Mechanics (ECCM V) and 6th. European Conference on Computational Fluid Dynamics (ECFD VI), Barcelona, Spain, July, 2014

  13. Plenary Speaker: Computational electro-chemo-mechanics for solids deteriorating at multiple scales

    XII th International Conference on Computational Plasticity (COMPLAS XII) -Fundamentals and Applications-, Barcelona, Spain, September, 2013

  14. Keynote Speaker: Two-scale thermo-electro-chemo-mechanical modeling for durability assessment of SOFC

    Euromech Colloquium 537 "Multiscale computational homogenization of heterogeneous structures and materials", Marne-la-Vallée, France, March, 2012

  15. Plenary Speaker: Characterization of electro-chemo-mechanical deterioration of cermets under SOFC operation

    XI th International Conference on Computational Plasticity (COMPLAS XI) -Fundamentals and Applications-, Barcelona, Spain, September, 2011

  16. AIMM Keynote Speaker: Multiscale computational assessment for mechanical deterioration of solid-oxide fuel cell (SOFC)

    9th World Congress on Computational Mechanics (in conjunction with the 4th Asian Pacific Congress on Computational Mechanics) (WCCM/APCOM 2010), Sydney, Australia, July, 2010

  17. Semi-Plenary Speaker: Modeling and analysis of macroscopic mechanical deterioration due to time-varying microstructures

    IV European Conference on Computational Mechanics (ECCM 2010) -Solids, Structures and Coupled Problems in Engineering-, Palais des Congres, France, May, 2010

  18. Invited Speaker: Numerical material testing for strength evaluation of polycrystalline metals

    4th International Conference on Multiscale Materials Modeling (MMM-2008), Tallahassee, Florida, USA, November, 2008

  19. Keynote Speaker: Two-scale finite element analysis for deformation-induced anisotropy of polycrystalline metals

    International Conference on Computational Methods (ICCM2004), Singapore, Singapore, November, 2004

  20. Invited Speaker: Finite cover method for physically and geometrically nonlinear problems

    Second International Workshop Meshfree Methods for Partial Differential Equations, Bonn, Germany, September, 2003

  1. Invited Speaker:CPFモデルとMPMによる材料と構造物の破壊シミュレーション

    国際粉体工業展大阪2021【最新情報フォーラム】ものづくりにおけるDX推進:粉体シミュレーションの活用, インテックス大阪, 大阪, 2021.October 13

  2. Keynote Speaker:計算力学分野における研究動向と今後の課題

    シミュレーション・フェスタ~ (2019 SIMULIA Community Conference Japan), ベルサール東京日本橋, 東京, 2019.October 29-30

  3. Keynote Speaker:非線形計算力学の現状・課題と今後

    第12回 メカニカルデザインセミナー(Mechanical Design 2019), 関東ITソフトウェア健康保険組合・山王健保会館, 東京, 2019.July 2

  4. Keynote Speaker: 計算力学の研究動向と産学連携CAE

    CAEユニバーシティ特別公開フォーラム 2018, 富士ソフトビル, 東京, August, 2018

  5. Invited Speaker: 繊維強化複合材料のミクロ構造に対するアイソジオメトリック接触・摩擦解析と時空間均質化

    第21回応用力学シンポジウム, 名城大学天白キャンパス, 名古屋, May, 2018

  6. Keynote Speaker: 計算力学における非線形シミュレーションの研究動向

    第9回メカニカルデザインユーザー会, メカニカルデザイン, 山王健保会館, 東京, January, 2016

  7. Keynote Speaker: FEMの発展の経緯と現状分析を踏まえたCAEへのアプローチ

    CAEユニバーシティ特別公開フォーラム 2015, 富士ソフトビル, 東京, August, 2015

  8. Keynote Speaker: 非線形CAEの研究動向と材料モデリング

    第3回メカニカルデザインユーザー会, メカニカルデザイン, 東京コンファレンスセンター, 東京, July, 2010

  9. Keynote Speaker: マルチスケール解析手法 -材料レベルと構造レベルのアプローチ-

    非線形解析フォーラム2006, ニュートンワークス, 東京, November, 2006

  10. Keynote Speaker: 使用環境を考慮した非線形均質化法による非均質材料のマクロ物性予測

    第18回計算力学講演会, オーガナイズドセッション「材料の組織・強度に関するマルチスケールアナリシス」, 筑波大学, つくば, November, 2005

  11. Keynote Speaker: マルチスケールCAEの可能性 -材料と構造の非線形ミクロ-マクロ連成モデリング-

    非線形解析フォーラム2005, ニュートンワークス, 東京, November, 2005

  12. Invited Speaker: 均質化法に基づく多結晶塑性モデリング

    2005年度日本機械学会年次大会, 電気通信大学, 東京, September, 2005

  13. Honor Speaker: Visual Seismic Hazard(震災の見える化)

    定例宮城県沖地震シンポジウム(第3回), 宮城県沖地震対策研究協議会, 仙台, March, 2005

  14. Invited Speaker: 均質化法に基づく非線形マルチスケール解析 -現状と課題-

    第6回計算数理工学フォーラム, 日本計算数理工学会, 千葉大西千葉キャンパス, 千葉, March, 2004

  15. Honor Speaker: 均質化理論に基づくマルチスケールモデリングとその各種非線形非均質材料への適用

    日本材料学会北陸信越支部 特別講演会, 日本材料学会, 信州大学工学部, 長野, March, 2001

  16. Invited Speaker: 均質化理論のマルチスケール解析の各種非線形問題への展開

    第13回計算力学講演会, フォーラム「不均質体・複合材の階層モデリング手法の最前線」, 日本機械学会, 豊橋技術科学大学, 豊橋, November, 2000

  1. Outstanding Paper Award 2020 (JSCES)

    Awarded Paper: Tsunami risk assessment using spatial modes extracted from results of numerical analysis, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2020, p.20200003, 2020

    URL: https://www.jsces.org/award/index.html

  2. Achievement Award 2020(JSCES)

    Kenjiro Terada, 2020

    URL: https://www.jsces.org/award/index.html

  3. JSME Medal for Outstanding Paper - 2018

    Awarded Paper: Seishiro Matsubara and Kenjiro Terada: Rheological constitutive model for thermoplastic resin based on viscoplastic-viscoelastic multiplicative decomposition of deformation gradient, Journal of the Society of Mechanical Engineers, Vol. 82, No. 839, p. 16-00060, 2016

  4. Outstanding Paper: Awards for Excellence - 2018

    Awarded Paper: Mayu Muramatsu, Keiji Yashiro, Tatsuya Kawada and Kenjiro Terada: Numerical simulations of non-stationary distributions of electrochemical potentials in SOFC, Engineering Computations, Vol. 6, No. 34, pp. 1956-1988, 2017

  5. Outstanding Paper Award 2015 (JSCES)

    Awarded Paper: Junji Kato, Hiroya Hoshiba, Shinsuke Takase, Kenjiro Terada and Takashi Kyoya: Accuracy validation of analytical sensitivity in topology optimization for elastoplastic composites, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2014, p.20140012, 2014

    URL: https://jsces.org/award/archive.html#list2015

  6. IACM Fellows Award 2014 (IACM)

    Kenjiro Terada, 2014

  7. Kawai Medal 2013 (JSCES)

    Kenjiro Terada, 2013

    URL: https://jsces.org/award/archive.html#list2013

  8. Outstanding Paper Award 2013 (JSCES)

    Awarded Paper: Mao Kurumatani, Terada Kenjiro, Junji Kato, Takashi Kyoya and Kazuo Kashiyama: An isotropic damage model based on fracture mechanics for concrete and its evaluation, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2013, p.20130015, 2013

    URL: https://jsces.org/award/archive.html#list2013

  9. Computational Mechanics Achievement Award 2007

    Kenjiro Terada, 2007

    URL: https://jsme.or.jp/cmd/japanese/award/index.html

  10. Outstanding Paper Award 2006 (JSCES)

    Awarded Paper: Mao Kurumatani and Terada Kenjiro: Finite cover method with multi-cover modeling -Fracture simulation of quasi-brittle heterogeneous solids-, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2006, p.20060029, 2006

    URL: https://jsces.org/award/archive.html#list2006

  11. Outstanding Paper Award 2002 (JSCES)

    Awarded Paper: Kenjiro Terada, Isao Saiki and Kazumi Matsui: Kinematically correct formulation for two-scale finite deformation problems, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2000, p.20000006, 2000

    URL: https://jsces.org/award/archive.html#list2002

  • International Association for Computational Mechanics (IACM)

    • President of IACM (2022.8-)

    • Vice President of IACM for Asia-Australia (2014.8-2018.7)

    • Member of Executive Council of IACM (2014.5-)

    • Member of General Council of IACM (2008.5-)

  • Asia-Pacific Association for Computational Mechanics (APACM)

    • Adjunct member of Executive Council (2014.9-2018.7)

    • Member of General Consil of APACM (2018.8-)

  • The Japan Society for Computational Engineering and Science (JSCES)

    • Auditor-Secretary (2018.6-2020.5)

    • President (2016.6-2018.5)

    • Vice-President (2014-2015)

    • Chairman of the International Committee of JSCES (2010-2013)

    • Chairman of JSCES Annual Conferences (2009 and 2010)

    • Vice-Chairman of JSCES Annual Confrences (2007 and 2008)

    • Member of Administrative Board of JSCES (2006-2018)

  • Japan Society of Civil Engineering (JSCE)

    • Chairman of Applied Mechanics Committee (2014.10-2016.9)

    • Member of Applied Mechanics Committee (1998.10-)

  • Japan Association for Nonlinear CAE (JANCAE)

    • President of JANCAE (2008-)

    • Vice-President of JANCAE (2003-2008)

  • Conference chair and etc.

    • Secretary General and Co-Chair of 15th the World Congress on Computational Mechanics (WCCM-XV) and 8th Asia Pacific Congress on Computational Mechanics (APCOM-VIII), July 31 - August 5, 2022

    • Steering Committee Member of the 3rd International Workshops on Advances in Computational Mechanics (IWACOM III), Tokyo, Japan, October 12-14, 2015

    • Secretary Local of the 1st International Conference on Computational Engineering and Science for Safety and Environmental Problems (COMPSAFE 2014), Sendai, Japan, April 13-16, 2014

    • Chairman of the 15th JSCES Annual Conference, Fukuoka, Japan, May 26-28, 2010

    • Chairman of the 2nd International Workshops on Advances in Computational Mechanics (IWACOM II), Yokohama, Japan, March 29-31, 2010

    • Chairman of the 14th JSCES Annual Conference, Tokyo, Japan, May 12-14, 2009

    • Organizing Committee Member of the 3rd Asian-Pacific Congres on Computational Mechanics (APCOM 2007) in conjunction with 11th International Conference on Enhancement and Promotion of Computational Methods in Engineering and Science (EPMESC XI), Kyoto, Japan, December 3-6, 2007

    • Organizing Committee Member of International Workshops on Advances in Computational Mechanics (IWACOM I), Hosei University (Tama Campus), Tokyo, Japan, November 3-6, 2004

  • Editors and etc.

    • Editorial Board member of Computer Methods in Applied Mechanics and Engineering (2022.2-)

    • Associate Editor of International Journal for Numerical Methods in Engineering (IJNME) (2014.9-)

    • Associate Editor of Advanced Modeling and Simulation in Engineering Science (2020.9-)

    • Editorial Board member of Computational Mechanics (2011-)

    • Member of Editorial Advisory Board of Engineering Computations (2014-)

    • Member of Board of Editors of Journal of Mechanics of Materials and Structures (2015.6-)

    • Member of Editorial Board of Progress in Disaster Science

    • Editorial Board member of Asia-Pacific Journal on Computational Engineering (APJCEN) (2014.7-2017.3)

    • Chairman of Editorial Board of Journal of Japan Society of Civil Engineers (JSCE), Ser. A2: Applied Mechanics (2014.10-2016.9)