Riichi Sugai, Jike Han, Yuya Yamaguchi, Shuji Moriguchi and Kenjiro Terada:

Extended B-spline-based implicit material point method enhanced by F-bar projection method to suppress pressure oscillation

Internat. J. Numer. Methods Engrg., Vol. n/a, No. n/a, ,

DOI: 10.1002/nme.7216

Yuichi Shintaku, Fumitoshi Nakamura and Kenjiro Terada:

A hybrid strategy blending primal-dual interior point and return mapping methods for a class of hypoelastic-plastic models with memory surface

Internat. J. Numer. Methods Engrg., Vol. n/a, No. n/a, ,

DOI: 10.1002/nme.7195

Jike Han, Seishiro Matsubara, Shinnosuke Nishi, Kenji Takada, Mayu Muramatsu, Masaki Omiya, Kensuke Ogawa, Kai Oide, Takaya Kobayashi, Masanobu Murata, Shuji Moriguchi and Kenjiro Terada:

Gradient damage model for ductile fracture introducing degradation of damage hardening modulus: implementation and experimental investigations

Int. J. Fract., , 2022

DOI: 10.1007/s10704-022-00681-9

Yosuke Yamanaka, Seishiro Matsubara, Shuji Moriguchi and Kenjiro Terada:

A method of fully implicit coupled analyses for thermoset resin subjected to cure based on variationally consistent formulation for finite thermo-viscoelasticity

Int. J. Solids Structures, Vol. 268, pp. 112161, 2023

DOI: 10.1016/j.ijsolstr.2023.112161

Jike Han, Yuichi Shintaku, Shuji Moriguchi and Kenjiro Terada:

A transition scheme from diffusive to discrete crack topologies at finite strain during the course of a staggered iterative procedure

Internat. J. Numer. Methods Engrg., Vol. 124, No. 6, pp. 1405-1433, 2023

DOI: 10.1002/nme.7169

Hasuka Kanno, Shuji Moriguchi, Yuto Tsuda, Ikumasa Yoshida, Shoji Iwanaga and Kenjiro Terada:

A method for rockfall risk quantification and optimal arrangement of protection structures along a road

Eng. Geol., Vol. 314, pp. 107004, 2023

DOI: 10.1016/j.enggeo.2023.107004

Kenta Tozato, Nilo Lemuel J. Dolojan, Yoshiya Touge, Shuichi Kure, Shuji Moriguchi, Seiki Kawagoe, So Kazama and Kenjiro Terada:

Limit equilibrium method-based 3D slope stability analysis for wide area considering influence of rainfall

Eng. Geol., Vol. 308, pp. 106808, 2022

DOI: 10.1016/j.enggeo.2022.106808

D. Watanabe, S. Moriguchi and K. Terada:

A numerical study on the effects of particle size distribution on run-out distance of granular flow

Soils and Foundations, Vol. 62, No. 6, pp. 101242, 2022

DOI: 10.1016/j.sandf.2022.101242

Reika Nomura, Saneiki Fujita, Joseph M. Galbreath, Yu Otake, Shuji Moriguchi, Shunichi Koshimura, Randall J. LeVeque and Kenjiro Terada:

Sequential Bayesian Update to Detect the Most Likely Tsunami Scenario Using Observational Wave Sequences

J. Geophys. Res. Oceans, Vol. 127, No. 10, pp. e2021JC018324, 2022

DOI: 10.1029/2021JC018324

Donsub Rim, Robert Baraldi, Christopher M. Liu, Randall J. LeVeque and Kenjiro Terada:

Tsunami Early Warning From Global Navigation Satellite System Data Using Convolutional Neural Networks

Geophys. Res. Lett., Vol. 49, No. 20, pp. e2022GL099511, 2022

DOI: 10.1029/2022GL099511

Jike Han, Seishiro Matsubara, Shuji Moriguchi and Kenjiro Terada:

Variational crack phase-field model for ductile fracture with elastic and plastic damage variables

Comput. Methods Appl. Mech. Engrg., Vol. 400, pp. 115577, 2022

DOI: 10.1016/j.cma.2022.115577

Huachao Deng, Yoshiaki Kawagoe, Yoshiaki Abe, Kenjiro Terada and Tomonaga Okabe:

Generalized coordinate smoothed particle hydrodynamics with an overset method in total Lagrangian formulation

Internat. J. Numer. Methods Engrg., Vol. 123, No. 19, pp. 4518-4544, 2022

DOI: 10.1002/nme.7043

Masaki Omiya, Seiya Arakawa, Zhenduo Yao, Mayu Muramatsu, Shinnosuke Nishi, Kenji Takada, Masanobu Murata, Kazuaki Okato, Kensuke Ogawa, Kai Oide, Takaya Kobayashi, Jike Han and Kenjiro Terada:

Influence of strength and notch shape on crack initiation and propagation behavior of advanced high strength steel sheets

Eng Fract Mech, Vol. 271, pp. 108573, 2022

DOI: 10.1016/j.engfracmech.2022.108573

Naruethep Sukulthanasorn, Hiroya Hoshiba, Koji Nishiguchi, Mao Kurumatani, Robert Fleischhauer, Kuniharu Ushijima, Michael Kaliske, Kenjiro Terada and Junji Kato:

Two-scale topology optimization for transient heat analysis in porous material considering the size effect of microstructure

Struct. Multidiscip. Optim., Vol. 65, No. 7, pp. 186, 2022

DOI: 10.1007/s00158-022-03257-2

K. Tozato, S. Takase, S. Moriguchi, K. Terada, Y. Otake, Y. Fukutani, K. Nojima, M. Sakuraba and H. Yokosu:

Rapid tsunami force prediction by mode-decomposition-based surrogate modeling

Nat Hazard Earth Sys, Vol. 22, No. 4, pp. 1267-1285, 2022

DOI: 10.5194/nhess-22-1267-2022

Yuichi Shintaku, Seiichiro Tsutsumi and Kenjiro Terada:

A CDM-like constitutive law for predicting degradation of strength and ductility of steel subjected to cyclic loading

Int. J. Plast., Vol. 153, pp. 103237, 2022

DOI: 10.1016/J.IJPLAS.2022.103237

C. Somphong, A. Suppasri, K. Pakoksung, T. Nagasawa, Y. Narita, R. Tawatari, S. Iwai, Y. Mabuchi, S. Fujita, S. Moriguchi, K. Terada, C. Athanasius and F. Imamura:

Submarine landslide source modeling using the 3D slope stability analysis method for the 2018 Palu, Sulawesi, tsunami

Nat Hazard Earth Sys, Vol. 22, No. 3, pp. 891-907, 2022

DOI: 10.5194/nhess-22-891-2022

Jike Han, Seishiro Matsubara, Shuji Moriguchi, Michael Kaliske and Kenjiro Terada:

Crack phase-field model equipped with plastic driving force and degrading fracture toughness for ductile fracture simulation

Comput. Mech., Vol. 69, No. 1, pp. 151-175, 2022

DOI: 10.1007/s00466-021-02087-1

S. Takarazawa, K. Ushijima, R. Fleischhauer, J. Kato, K. Terada, W. J. Cantwell, M. Kaliske, S. Kagaya and S. Hasumoto:

Heat-transfer and pressure drop characteristics of micro-lattice materials fabricated by selective laser metal melting technology

Heat Mass Transf., Vol. 58, No. 1, pp. 125-141, 2022

DOI: 10.1007/s00231-021-03083-0

Reika Nomura, Shinsuke Takase, Shuji Moriguchi, Kenjiro Terada and Randall J. LeVeque:

Multiscale evaluation method of the drag effect on shallow water flow through coastal forests based on 3D numerical simulations

Internat. J. Numer. Methods Fluids, Vol. 94, Issue 1, pp. 32-58, 2022

DOI: 10.1002/fld.5046

Takeki Yamamoto, Tomonaga Okabe and Kenjiro Terada:

Numerical simulation for deformation of laminates combining the novel shell element with the decoupled two-scale viscoelastic analysis of FRP

Int. J. Solids Structures, Vol. 234-235, pp. 111236, 2022

DOI: 10.1016/j.ijsolstr.2021.111236

Jike Han, Bo Yin, Michael Kaliske and Kenjiro Terada:

Incorporation of gradient-enhanced microplane damage model into isogeometric analysis

Eng. Comput., Vol. 38 No. 8, pp. 3388-3415, 2021

DOI: 10.1108/EC-08-2020-0455

Yo Fukutani, Shuji Moriguchi, Kenjiro Terada and Yu Otake:

Time-Dependent Probabilistic Tsunami Inundation Assessment Using Mode Decomposition to Assess Uncertainty for an Earthquake Scenario

J. Geophys. Res. Oceans, Vol. 126 No. 7, pp. e2021JC017250, 2021

DOI: 10.1029/2021jc017250

Masami Sato, Mayu Muramatsu, Shinnosuke Nishi, Tatsuya Kawada and Kenjiro Terada:

Substitution approach for decoupled two-scale analysis of materially nonlinear composite plates

Comput. & Structures, Vol. 255, pp. 106623, 2021

DOI: 10.1016/J.COMPSTRUC.2021.106623

Shaoyuan Pan, Yuya Yamaguchi, Anawat Suppasri, Shuji Moriguchi and Kenjiro Terada:

MPM-FEM hybrid method for granular mass-water interaction problems

Comput. Mech., Vol. 68, No. 1, pp. 155-173, 2021

DOI: 10.1007/s00466-021-02024-2

Nilo Lemuel J. Dolojan, Shuji Moriguchi, Masakazu Hashimoto and Kenjiro Terada:

Mapping method of rainfall-induced landslide hazards by infiltration and slope stability analysis

Landslides, Vol. 18, No. 6, pp. 2039-2057, 2021

DOI: 10.1007/s10346-020-01617-x

Yuki Kamikawa, Koji Amezawa and Kenjiro Terada:

Chemomechanical Simulation of LiF-Rich Solid–Electrolyte Interphase Formed from Fluoroethylene Carbonate on a Silicon Anode

ACS Appl. Energy Mater., Vol. 4, No. 4, pp. 3231-3239, 2021

DOI: 10.1021/acsaem.0c03014

Hasuka Kanno, Shuji Moriguchi, Shunsuke Hayashi and Kenjiro Terada:

A computational design optimization method for rockfall protection embankments

Eng. Geol., Vol. 284, pp. 105920, 2021

DOI: 10.1016/j.enggeo.2020.105920

Yuya Yamaguchi, Shuji Moriguchi and Kenjiro Terada:

Extended B-spline-based implicit material point method

Internat. J. Numer. Methods Engrg., Vol. 122, No. 7, pp. 1746-1769, 2021

DOI: 10.1002/nme.6598

Yuki Kamikawa, Koji Amezawa and Kenjiro Terada:

Energy-loss near-edge structures and low-loss structures of polymers in a solid electrolyte interface formed from fluoroethylene carbonate on a Si anode clarified by DFT calculations

The Journal of Physical Chemistry C, Vol. 125, No. 7, pp. 3890-3900, 2021

DOI: 10.1021/acs.jpcc.0c10204

Yosuke Yamanaka, Seishiro Matsubara, Risa Saito, Shuji Moriguchi and Kenjiro Terada:

Thermo-mechanical coupled incremental variational formulation for thermosetting resins subjected to curing process

Int. J. Solids Structures, Vol. 216, pp. 30-42, 2021

DOI: 10.1016/j.ijsolstr.2021.01.014

Risa Saito, Yosuke Yamanaka, Seishiro Matsubara, Tomonaga Okabe, Shuji Moriguchi and Kenjiro Terada:

A decoupling scheme for two-scale finite thermoviscoelasticity with thermal and cure-induced deformations

Internat. J. Numer. Methods Engrg., Vol. 122, No. 4, pp. 1133-1166, 2021

DOI: 10.1002/nme.6575

Seishiro Matsubara and Kenjiro Terada:

A variationally consistent formulation of the thermo-mechanically coupled problem with non-associative viscoplasticity for glassy amorphous polymers

Int. J. Solids Structures, Vol. 212, pp. 152-168, 2021

DOI: 10.1016/j.ijsolstr.2020.12.004

T. Kotani, K. Tozato, S. Takase, S. Moriguchi, K. Terada, Y. Fukutani, Y. Otake, K. Nojima, M. Sakuraba and Y. Choe:

Probabilistic tsunami hazard assessment with simulation-based response surfaces

Coastal Eng., Vol. 160, pp. 103719, 2020

DOI: 10.1016/j.coastaleng.2020.103719

Riccardo Fincato, Seiichiro Tsutsumi, Tatsuo Sakai and Kenjiro Terada:

3D crystal plasticity analyses on the role of hard/soft inclusions in the local slip formation

Int. J. Fatigue, Vol. 134, pp. 105518, 2020

DOI: 10.1016/j.ijfatigue.2020.105518

Elizabeth Maly, Kenjiro Terada, Randall J. LeVeque, Naoko Kuriyama, Daniel B. Abramson, Lan T. Nguyen, Ann Bostrom, Jorge León, Michael Motley, Patricio A. Catalan, Shunichi Koshimura, Shuji Moriguchi, Yuya Yamaguchi, Carrie Garrison-Laney, Anawat Suppasri, Erick Mas:

Advances of international collaboration on M9 disaster science: scientific session report

Journal of Disaster Research, Vol. 15, No. 7, pp. 890-899, 2020

DOI: 10.20965/jdr.2020.p0890

Ryo Hatano, Seishiro Matsubara, Shuji Moriguchi, Kenjiro Terada and Julien Yvonnet:

\(\text{FE}^r\) method with surrogate localization model for hyperelastic composite materials

Adv. Model. Simul. Eng. Sci., Vol. 7, No. 1, pp. 39, 2020

DOI: 10.1186/s40323-020-00175-0

Yuki Kamikawa, Koji Amezawa and Kenjiro Terada:

Elastic-plastic deformation of a solid electrolyte interface formed by reduction of fluoroethylene carbonate: a nanoindentation and finite element analysis study

J. Phys. Chem. C, Vol. 124, No. 41, pp. 22488-22495, 2020

DOI: 10.1021/acs.jpcc.0c06420

Yuki Kamikawa, Kouji Amezawa and Kenjiro Terada:

First-principles study on the mechanical properties of polymers formed by the electrochemical reduction of fluoroethylene carbonate and vinylene carbonate

J. Phys. Chem. C, Vol. 124, No. 37, pp. 19937-19944, 2020

DOI: 10.1021/acs.jpcc.0c04878

Robert Fleischhauer, Tom Thomas, Junji Kato, Kenjiro Terada and Michael Kaliske:

Finite thermo-elastic decoupled two-scale analysis

Int. J. Numer. Methods Eng., Vol. 121, No. 3, pp. 355-392, 2020

DOI: 10.1002/nme.6212

Seishiro Matsubara, Kenjiro Terada, Ryusei Maeda, Takaya Kobayashi, Masanobu Murata, Takuya Sumiyama, Kenji Furuichi and Chisato Nonomura:

Viscoelastic-viscoplastic combined constitutive model for glassy amorphous polymers under loading/unloading/no-load states

Engineering Computations, Vol. 82, No. 839, p. 16-00060, 2020

DOI: 10.1108/EC-05-2019-0197

Shinnosuke Nishi, Takayuki Yamada, Kazuhiro Izui, Shinji Nishiwaki and Kenjiro Terada:

Isogeometric topology optimization of anisotropic metamaterials for controlling high-frequency electromagnetic wave

Int. J. Numer. Methods Eng., Vol. 121, No. 6, pp. 1218-1247, 2020

DOI: 10.1002/nme.6263

Risa Saito, Yuya Yamaguchi, Seishiro Matsubara, Shuji Moriguchi, Yasuko Mihara, Takaya Kobayashi and Kenjiro Terada:

Decoupled two-scale viscoelastic analysis of FRP in consideration of dependence of resin properties on degree of cure

Int. J. Solids Struct., Vol. 190, pp. 199-215, 2020

DOI: 10.1016/j.ijsolstr.2019.11.010

Yuya Yamaguchi, Shinsuke Takase, Shuji Moriguchi and Kenjiro Terada:

Solid–liquid coupled material point method for simulation of ground collapse with fluidization

Comp. Part. Mech., Vol. 7, No. 2, pp. 209-223, 2020

DOI: 10.1007/s40571-019-00249-w

Berkay Alp Çakal, İlker Temizer, Kenjiro Terada, Junji Kato:

Microscopic design and optimization of hydrodynamically lubricated dissipative interfaces

Int. J. Numer. Methods Eng., Vol. 120, No. 2, pp. 153-178, 2019

DOI: 10.1002/nme.6129

Yo Fukutani, Shuji Moriguchi, Kenjiro Terada, Takuma Kotani, Yu Otake and Toshikazu Kitano:

Tsunami hazard and risk assessment for multiple buildings by considering the spatial correlation of wave height using copulas

Nat. Hazards Earth Syst. Sci., Vol. 19, No. 11, pp. 2619-2634, 2019

DOI: 10.5194/nhess-19-2619-2019

Mao Kurumatani, Yuto Soma and Kenjiro Terada:

Simulations of cohesive fracture behavior of reinforced concrete by a fracture-mechanics-based damage model

Eng. Fract. Mech., Vol. 206, pp. 392-407, 2019

DOI: 10.1016/j.engfracmech.2018.12.006

S. Nishi, K. Terada and I. Temizer:

Isogeometric analysis for numerical plate testing of dry woven fabrics involving frictional contact at meso-scale

Comput. Mech., Vol. 64, No. 1, pp. 211-229, 2019

DOI: 10.1007/s00466-018-1666-6

H. Yokokawa, M. Suzuki, M. Yoda, T. Suto, K. Tomida, K. Hiwatashi, M. Shimazu, A. Kawakami, H. Sumi, M. Ohmori, T. Ryu, N. Mori, M. Iha, S. Yatsuzuka, K. Yamaji, H. Kishimoto, K. Develos‐Bagarinao, T. Shimonosono, K. Sasaki, S. Taniguchi, T. Kawada, M. Muramatsu, K. Terada, K. Eguchi, T. Matsui, H. Iwai, M. Kishimoto, N. Shikazono, Y. Mugikura, T. Yamamoto, M. Yoshikawa, K. Yasumoto, K. Asano, Y. Matsuzaki, K. Sato, T. Somekawa:

Achievements of NEDO durability projects on SOFC stacks in the light of physicochemical mechanisms

Fuel Cells, Vol. 19, No. 4, pp. 311-339, 2019

DOI: 10.1002/fuce.201800187

Junji Kato, Daishun Yachi, Takashi Kyoya and Kenjiro Terada:

Micro-macro concurrent topology optimization for nonlinear solids with a decoupling multiscale analysis

Int. J. Numer. Methods Eng., Vol. 113, No. 8, pp. 1189-1213, 2018

DOI: 10.1002/nme.5571

Panon Latcharote, Kenjiro Terada, Muneo Hori and Fumihiko Imamura:

A prototype seismic loss assessment tool using integrated earthquake simulation

Int. J. Disaster Risk Reduct., Vol. 31, pp. 1354-1365, 2018

DOI: 10.1016/j.ijdrr.2018.03.026

Mayu Muramatsu, Masami Sato, Kenjiro Terada, Satoshi Watanabe, Keiji Yashiro, Tatsuya Kawada, Fumitada Iguchi and Harumi Yokokawa:

Shape deformation analysis of anode-supported solid oxide fuel cell by electro-chemo-mechanical simulation

Solid State Ionics, Vol. 319, pp. 194-202, 2018

DOI: 10.1016/j.ssi.2018.01.027

M. Muramatsu, K. Yashiro, T. Kawada and K. Terada:

Simulation of ferroelastic phase formation using phase-field model

Int. J. Mech. Sci., Vol. 146-147, pp. 462-474, 2018

DOI: 10.1016/j.ijmecsci.2017.12.027

Shinnosuke Nishi, Kenjiro Terada, Junji Kato, Shinji Nishiwaki and Kazuhiro Izui:

Two-scale topology optimization for composite plates with in-plane periodicity

Int. J. Numer. Methods Eng., Vol. 113, No. 8, pp. 1164-1188, 2018

DOI: 10.1002/nme.5545

Seishiro Matsubara, Kenjiro Tarada, Takaya Kobayashi, Toshiyuki Saitou, Manabu Umeda, Yasuko Mihara, Kai Oide, Hiroto Shin and Yasuhiro Katsuda:

A set of constitutive functions for dried body to predict entire deformation process of ceramic products during firing

Engineering Computations, Vol. 34, No. 8, pp. 2668-2697, 2017

DOI: 10.1108/EC-12-2016-0444

Seishiro Matsubara, Shin-Nosuke Nishi, Kenjiro Terada:

On the treatments of heterogeneities and periodic boundary conditions for isogeometric homogenization analysis

Int. J. Numer. Methods Eng., Vol. 109, No. 11, pp. 1523-1548, 2017

DOI: 10.1002/nme.5328

Mayu Muramatsu, Keiji Yashiro, Tatsuya Kawada, Kenjiro Tarada and Mayu Muramatsu:

Numerical simulations of non-stationary distributions of electrochemical potentials in SOFC

Engineering Computations, Vol. 34, No. 6, pp. 1956-1988, 2017

DOI: 10.1108/EC-08-2016-0311

Ikkoh Tachibana, Shuji Moriguchi, Shinsuke Takase, Kenjiro Terada, Takayuki Aoki, Kohji Kamiya and Takeshi Kodaka:

Characterization of transition from Darcy to non-Darcy flow with 3D pore-level simulations

Soils and Foundations, Vol. 57, No. 5, pp. 707-719, 2017

DOI: 10.1016/j.sandf.2017.08.003

A. Waseem, İ. Temizer, J. Kato, K. Terada:

Micro-texture design and optimization in hydrodynamic lubrication via two-scale analysis

Struct Multidisc Optim, Vol. 56, No. 2, pp. 227-248, 2017

DOI: 10.1007/s00158-017-1713-5

H. Yokokawa, Y. Hori, T. Shigehisa, M. Suzuki, S. Inoue, T. Suto, K. Tomida, M. Shimazu, A. Kawakami, H. Sumi, M. Ohmori, N. Mori, T. Iha, K. Yamaji, H. Kishimoto, K. Develos‐Bagarinao, K. Sasaki, S. Taniguchi, T. Kawada, M. Muramatsu, K. Terada, K. Eguchi, T. Matsui, H. Iwai, M. Kishimoto, N. Shikazono, Y. Mugikura, T. Yamamoto, M. Yoshikawa, K. Yasumoto, K. Asano, Y. Matsuzaki, S. Amaha, T. Somekawa:

Recent achievements of NEDO durability project with an emphasis on correlation between cathode overpotential and ohmic loss

Fuel Cells, Vol. 17, No. 4, pp. 473-497, 2017

DOI: 10.1002/fuce.201600186

Harumi Yokokawa, Haruo Kishimoto, Taro Shimonosono, Katsuhiko Yamaji, Mayu Muramatsu, Kenjiro Terada, Keiji Yashiro and Tatsuya Kawada:

Simulation technology on SOFC durability with an emphasis on conductivity degradation of ZrO2-base electrolyte

J. Electrochem. En. Conv. Stor., Vol. 14, No. 1, pp. 011004-011004-19, 2017

DOI: 10.1115/1.4036038

Mao Kurumatani, Kenjiro Terada, Junji Kato, Takashi Kyoya and Kazuo Kashiyama:

An isotropic damage model based on fracture mechanics for concrete

Eng. Fract. Mech., Vol. 155, pp. 49-66, 2016

DOI: 10.1016/j.engfracmech.2016.01.020

S. Takase, S. Moriguchi, K. Terada, J. Kato, T. Kyoya, K. Kashiyama and T. Kotani:

2D–3D hybrid stabilized finite element method for tsunami runup simulations

Comput. Mech., Vol. 58, No. 3, pp. 411-422, 2016

DOI: 10.1007/s00466-016-1300-4

Kenjiro Terada, Norio Hirayama, Koji Yamamoto, Mayu Muramatsu, Seishiro Matsubara, Shin-nosuke Nishi:

Numerical plate testing for linear two-scale analyses of composite plates with in-plane periodicity

Int. J. Numer. Methods Eng., Vol. 105, No. 2, pp. 111-137, 2016

DOI: 10.1002/nme.4970

A. Waseem, İ. Temizer, J. Kato, K. Terada:

Homogenization-based design of surface textures in hydrodynamic lubrication

Int. J. Numer. Methods Eng., Vol. 108, No. 12, pp. 1427-1450, 2016

DOI: 10.1002/nme.5256

Junji Kato, Hiroya Hoshiba, Shinsuke Takase, Kenjiro Terada and Takashi Kyoya:

Analytical sensitivity in topology optimization for elastoplastic composites

Struct Multidisc Optim, Vol. 52, No. 3, pp. 507-526, 2015

DOI: 10.1007/s00158-015-1246-8

M. Muramatsu, K. Terada, T. Kawada, K. Yashiro, K. Takahashi and S. Takase:

Characterization of time-varying macroscopic electro-chemo-mechanical behavior of SOFC subjected to Ni-sintering in cermet microstructures

Comput. Mech., Vol. 56, No. 4, pp. 653-676, 2015

DOI: 10.1007/s00466-015-1193-7

Junji Kato, Keiichiro Ishii, Kenjiro Terada and Takashi Kyoya:

Layout design of rockbolts for natural ground reinforcement

Int. J. Numer. Anal. Methods Geomech., Vol. 38, No. 3, pp. 236-255, 2014

DOI: 10.1002/nag.2202

Junji Kato, Daishun Yachi, Kenjiro Terada and Takashi Kyoya:

Topology optimization of micro-structure for composites applying a decoupling multi-scale analysis

Struct Multidisc Optim, Vol. 49, No. 4, pp. 595-608, 2014

DOI: 10.1007/s00158-013-0994-6

Kenjiro Terada, Norio Hirayama, Koji Yamamoto, Junji Kato, Takashi Kyoya, Seishiro Matsubara, Yusuke Arakawa, Yuta Ueno and Naohiro Miyanaga:

Applicability of micro–macro decoupling scheme to two-scale analysis of fiber-reinforced plastics

Adv. Compos. Mater, Vol. 23, No. 5-6, pp. 421-450, 2014

DOI: 10.1080/09243046.2014.915098

K. Terada, J. Kato, N. Hirayama, T. Inugai and K. Yamamoto:

A method of two-scale analysis with micro-macro decoupling scheme: application to hyperelastic composite materials

Comput. Mech., Vol. 52, No. 5, pp. 1199-1219, 2013

DOI: 10.1007/s00466-013-0872-5

Kazuyuki Nakahata, Kenjiro Terada, Takashi Kyoya, Makoto Tsukino and Keizo Ishii:

Simulation of ultrasonic and electromagnetic wave propagation for nondestructive testing of concrete using image-based FIT

JCST, Vol. 6, No. 1, pp. 28-37, 2012

DOI: 10.1299/jcst.6.28

Mao Kurumatani and Kenjiro Terada:

A method of global-local analyses of structures involving local heterogeneities and propagating cracks

Structural Engineering and Mechanics, Vol. 38, No. 4, pp. 529-547, 2011

DOI: 10.12989/sem.2011.38.4.529

T. Yamamoto, S. Maruyama, K. Terada, K. Izui and S. Nishiwaki:

A generalized macroscopic model for sound-absorbing poroelastic media using the homogenization method

Comput. Methods Appl. Mech. Eng., Vol. 200, No. 1, pp. 251-264, 2011

DOI: 10.1016/j.cma.2010.08.009

Shigenobu Okazawa, Hideyuki Terasawa, Mao Kurumatani, Kenjiro Terada and Kazuo Kashiyama:

Eulerian finite cover method for solid dynamics

Int. J. Comput. Methods, Vol. 07, No. 01, pp. 33-54, 2010

DOI: 10.1142/S0219876210002052

K. Terada, M. Kurumatani, T. Ushida and N. Kikuchi:

A method of two-scale thermo-mechanical analysis for porous solids with micro-scale heat transfer

Comput. Mech., Vol. 46, No. 2, pp. 269-285, 2010

DOI: 10.1007/s00466-009-0400-9

Kenjiro Terada and Mao Kurumatani:

Two-scale diffusion–deformation coupling model for material deterioration involving micro-crack propagation

Int. J. Numer. Methods Eng., Vol. 83, No. 4, pp. 426-451, 2010

DOI: 10.1002/nme.2835

I. Watanabe and K. Terada:

A method of predicting macroscopic yield strength of polycrystalline metals subjected to plastic forming by micro–macro de-coupling scheme

Int. J. Mech. Sci., Vol. 52, No. 2, pp. 343-355, 2010

DOI: 10.1016/j.ijmecsci.2009.10.006

Mao Kurumatani and Kenjiro Terada:

Finite cover method with multi-cover layers for the analysis of evolving discontinuities in heterogeneous media

Int. J. Numer. Methods Eng., Vol. 79, No. 1, pp. 1-24, 2009

DOI: 10.1002/nme.2545

Tatsuya Kawada, Satoshi Watanabe, Shin-ichi Hashimoto, Tadashi Sakamoto, Atsushi Unemoto, Mao Kurumatani, Kazuhisa Sato, Fumitada Iguchi, Keiji Yashiro, Koji Amezawa, Kenjiro Terada, Momoji Kubo, Hiroo Yugami, Toshiyuki Hashida, Junichiro Mizusaki:

Classification of mechanical failure in SOFC and strategy for evaluation of operational margin

ECS Trans., Vol. 25, No. 2, pp. 467, 2009

DOI: 10.1149/1.3205556

Ikumu Watanabe, Kenjiro Terada, Eduardo Alberto de Souza Neto, Djordje Perić:

Characterization of macroscopic tensile strength of polycrystalline metals with two-scale finite element analysis

J. Mech. Phys. Solids, Vol. 56, No. 3, pp. 1105-1125, 2008

DOI: 10.1016/j.jmps.2007.06.001

Shinji Nishiwaki, Yasunori Maeda, Kazuhiro Izui, Masataka Yoshimura, Kazumi Matsui and Kenjiro Terada:

Topology optimization of mechanical structures targeting vibration characteristics

JEE, Vol. 2, No. 3, pp. 480-492, 2007

DOI: 10.1299/jee.2.480

K. Terada and I. Watanabe:

Computational aspects of tangent moduli tensors in rate-independent crystal elastoplasticity

Comput. Mech., Vol. 40, No. 3, pp. 497-511, 2007

DOI: 10.1007/s00466-006-0123-0

K. Terada, A. Maruyama and M. Kurumatani:

Eulerian finite cover method for quasi-static equilibrium problems of hyperelastic bodies

Commun. Numer. Methods Eng., Vol. 23, No. 12, pp. 1081-1094, 2007

DOI: 10.1002/cnm.948

K. Terada, T. Ishii, T. Kyoya and Y. Kishino:

Finite cover method for progressive failure with cohesive zone fracture in heterogeneous solids and structures

Comput. Mech., Vol. 39, No. 2, pp. 191-210, 2007

DOI: 10.1007/s00466-005-0017-6

Tateki Ishii, Kenjiro Terada and Takashi Kyoya:

Failure analysis of quasi-brittle materials involving multiple mechanisms on fractured surfaces

Int. J. Numer. Methods Eng., Vol. 67, No. 7, pp. 960-988, 2006

DOI: 10.1002/nme.1656

Y. Maeda, S. Nishiwaki, K. Izui, M. Yoshimura, K. Matsui and K. Terada:

Structural topology optimization of vibrating structures with specified eigenfrequencies and eigenmode shapes

Int. J. Numer. Methods Eng., Vol. 67, No. 5, pp. 597-628, 2006

DOI: 10.1002/nme.1626

Isao Saiki, Ken Ooue, Kenjiro Terada and Akinori Nakajima:

Multiscale modeling for planar lattice microstructures with structural elements

JMC, Vol. 4, No. 4, , 2006

DOI: 10.1615/IntJMultCompEng.v4.i4.20

Kenjiro Terada, Ikumu Watanabe and Masayoshi Akiyama:

Effects of shape and size of crystal grains on the strengths of polycrystalline metals

JMC, Vol. 4, No. 4, , 2006

DOI: 10.1615/IntJMultCompEng.v4.i4.30

M. Akiyama, Y. Neishi, A. Taniyama and K. Terada:

Direct observation of microscopic plastic deformation of stainless steel using lattice drawn by focused ion beam of Ga+

Mater. Sci. Technol., Vol. 21, No. 3, pp. 274-280, 2005

DOI: 10.1179/174328405X27089

M. Kurumatani and K. Terada:

Finite cover method with mortar elements for elastoplasticity problems

Comput. Mech., Vol. 36, No. 1, pp. 45-61, 2005

DOI: 10.1007/s00466-004-0641-6

Kenjiro Terada and Mao Kurumatani:

An integrated procedure for three-dimensional structural analysis with the finite cover method

Int. J. Numer. Methods Eng., Vol. 63, No. 15, pp. 2102-2123, 2005

DOI: 10.1002/nme.1356

Ikumu Watanabe, Kenjiro Terada and Masayoshi Akiyama:

Two-scale analysis for deformation-induced anisotropy of polycrystalline metals

Computational Materials Science, Vol. 32, No. 2, pp. 240-250, 2005

DOI: 10.1016/j.commatsci.2004.08.002

K. Matsui and K. Terada:

Continuous approximation of material distribution for topology optimization

Int. J. Numer. Methods Eng., Vol. 59, No. 14, pp. 1925-1944, 2004

DOI: 10.1002/nme.945

Kazumi Matsui, Kenjiro Terada and Kohei Yuge:

Two-scale finite element analysis of heterogeneous solids with periodic microstructures

Computers & Structures, Vol. 82, No. 7, pp. 593-606, 2004

DOI: 10.1016/j.compstruc.2004.01.004

Kenjiro Terada, Kazumi Matsui, Masayoshi Akiyama and Takashi Kuboki:

Numerical re-examination of the micro-scale mechanism of the Bauschinger effect in carbon steels

Computational Materials Science, Vol. 31, No. 1, pp. 67-83, 2004

DOI: 10.1016/j.commatsci.2004.01.037

Kenjiro Terada and Mao Kurumatani:

Performance assessment of generalized elements in the finite cover method

Finite Elem. Anal. Des., Vol. 41, No. 2, pp. 111-132, 2004

DOI: 10.1016/j.finel.2004.05.001

K. Kaneko, K. Terada, T. Kyoya and Y. Kishino:

Global–local analysis of granular media in quasi-static equilibrium

Int. J. Solids Struct., Vol. 40, No. 15, pp. 4043-4069, 2003

DOI: 10.1016/S0020-7683(03)00209-9

Kenjiro Terada, Mitsuteru Asai and Michihiro Yamagishi:

Finite cover method for linear and non-linear analyses of heterogeneous solids

Int. J. Numer. Methods Eng., Vol. 58, No. 9, pp. 1321-1346, 2003

DOI: 10.1002/nme.820

Kenjiro Terada, Yutaka Neishi, Masayoshi Akiyama and Yoshitaka Adachi:

Trigger for the occurrence of grain coarsening phenomenon of BS304S31 austenite stainless steel under small plastic strain at high temperature

Engineering Computations, Vol. 20, No. 5/6, pp. 499-512, 2003

DOI: 10.1108/02644400310488736

K. Terada, I. Saiki, K. Matsui and Y. Yamakawa:

Two-scale kinematics and linearization for simultaneous two-scale analysis of periodic heterogeneous solids at finite strain

Comput. Methods Appl. Mech. Eng., Vol. 192, No. 31, pp. 3531-3563, 2003

DOI: 10.1016/S0045-7825(03)00365-7

M. Akiyama, T. Kuboki, K. Oikawa, K. Matsui and K. Terada:

Influence of carbon content and carbide morphology of carbon steels on stress strain curve in vicinity of yield point

Mater. Sci. Technol., Vol. 18, No. 11, pp. 1272-1278, 2002

DOI: 10.1179/026708302225006151

Kiyohiro Ikeda, Kai Oide and Kenjiro Terada:

Imperfection sensitive variation of critical loads at hilltop bifurcation point

Int. J. Eng. Sci., Vol. 40, No. 7, pp. 743-772, 2002

DOI: 10.1016/S0020-7225(01)00098-2

Shigenobu Okazawa, Kai Oide, Kiyohiro Ikeda and Kenjiro Terada:

Imperfection sensitivity and probabilistic variation of tensile strength of steel members

Int. J. Solids Struct., Vol. 39, No. 6, pp. 1651-1671, 2002

DOI: 10.1016/S0020-7683(01)00258-X

I. Saiki, K. Terada, K. Ikeda and M. Hori:

Appropriate number of unit cells in a representative volume element for micro-structural bifurcation encountered in a multi-scale modeling

Comput. Methods Appl. Mech. Eng., Vol. 191, No. 23, pp. 2561-2585, 2002

DOI: 10.1016/S0045-7825(01)00413-3

Naoki Takano, Masaru Zako, Toru Okazaki and Kenjiro Terada:

Microstructure-based evaluation of the influence of woven architecture on permeability by asymptotic homogenization theory

Compos. Sci. Technol., Vol. 62, No. 10, pp. 1347-1356, 2002

DOI: 10.1016/S0266-3538(02)00076-3

Kenjiro Terada, Takashi Kyoya, Motoki Kazama, Kiho Lee and Lizhu Oyang:

Image-based modelling and analysis of microstructures for two-scale problems in geomechanics

Int. J. Numer. Anal. Methods Geomech., Vol. 26, No. 3, pp. 273-297, 2002

DOI: 10.1002/nag.201

Kiyohiro Ikeda, Shigenobu Okazawa, Kenjiro Terada, Hirohisa Noguchi and Tsutomu Usami:

Recursive bifurcation of tensile steel specimens

Int. J. Eng. Sci., Vol. 39, No. 17, pp. 1913-1934, 2001

DOI: 10.1016/S0020-7225(01)00040-4

Kazumi Matsui, Kenjiro Terada and Kohei Yuge:

Parallelized two-scale analysis with a PC cluster for elastic-plastic heterogeneous media

JSME International Journal Series A Solid Mechanics and Material Engineering, Vol. 44, No. 4, pp. 584-593, 2001

DOI: 10.1299/jsmea.44.584

K. Terada and N. Kikuchi:

A class of general algorithms for multi-scale analyses of heterogeneous media

Comput. Methods Appl. Mech. Eng., Vol. 190, No. 40, pp. 5427-5464, 2001

DOI: 10.1016/S0045-7825(01)00179-7

Kenjiro Terada, Muneo Hori, Takashi Kyoya and Noboru Kikuchi:

Simulation of the multi-scale convergence in computational homogenization approaches

Int. J. Solids Struct., Vol. 37, No. 16, pp. 2285-2311, 2000

DOI: 10.1016/S0020-7683(98)00341-2

Takashi Kyoya, Kenjiro Terada and Toshikazu Kawamoto:

Multi-scale limit load analysis for discontinuous rock mass based on the homogenization method

Int. J. Numer. Anal. Methods Geomech., Vol. 23, No. 10, pp. 995-1019, 1999

DOI: 10.1002/(SICI)1096-9853(19990825)23:10<995::AID-NAG21>3.0.CO;2-B

Kazuo Murota, Kiyohiro Ikeda and Kenjiro Terada:

Bifurcation mechanism underlying echelon-mode formation

Comput. Methods Appl. Mech. Eng., Vol. 170, No. 3, pp. 423-448, 1999

DOI: 10.1016/S0045-7825(98)00206-0

K. Terada, T. Ito and N. Kikuchi:

Characterization of the mechanical behaviors of solid-fluid mixture by the homogenization method

Comput. Methods Appl. Mech. Eng., Vol. 153, No. 3, pp. 223-257, 1998

DOI: 10.1016/S0045-7825(97)00071-6

D. Golanski, K. Terada and N. Kikuchi:

Macro and micro scale modeling of thermal residual stresses in metal matrix composite surface layers by the homogenization method

Comput. Mech., Vol. 19, No. 3, pp. 188-202, 1997

DOI: 10.1007/s004660050168

K. Terada, T. Miura and N. Kikuchi:

Digital image-based modeling applied to the homogenization analysis of composite materials

Comput. Mech., Vol. 20, No. 4, pp. 331-346, 1997

DOI: 10.1007/s004660050255

Kenjiro Terada, Katsuyuki Suzuki and Hideomi Ohtsubo:

FFT-based homogenization algorithm using digital images

J. Soc. Mat. Sci., Japan, Vol. 46, Issue 12Appendix, pp. 231-236, 1997

DOI: 10.2472/jsms.46.12Appendix_231

Kenjiro Terada and Noboru Kikuchi:

Global-local constitutive modeling of composite materials by the homogenization method

J. Soc. Mat. Sci., Japan, Vol. 45, Issue 6Appendix, pp. 73-80, 1996

DOI: 10.2472/jsms.45.6Appendix_73

Kenjiro Terada and Noboru Kikuchi:

Microstructural design of composites using the homogenization method and digital images

J. Soc. Mat. Sci., Japan, Vol. 45, Issue 6Appendix, pp. 65-72, 1996

DOI: 10.2472/jsms.45.6Appendix_65

Takashi USHIDA, Takashi NAKAYAMA and Kenjiro TERADA:

DETERIORATION PREDICTION METHOD BASED ON BRINE FLOW IN GROUND FOR UNDERGROUND STRUCTURE NEAR TIDAL RIVER

Journal of Japan Society of Civil Engineers, Ser. F1 (Tunnel Engineering), Vol. 78, No. 1, pp. 132-149, 2022

DOI: 10.2208/jscejte.78.1_132

Kenta TOZATO, Shun SASAKI, Nilo Lemuel J. DOLOJAN, Shuji MORIGUCHI and Kenjiro TERADA:

Landslide Hazard Mapping Based on Slope Stability Analysis Considering Rainfall Spatial Uncertainty

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2022, pp. 20220018-20220018, 2022

DOI: 10.11421/jsces.2022.20220018

Masato SOMEMIYA, Naoki TAGUCHI, Norio HIRAYAMA, Seishiro MATSUBARA, Koji YAMAMOTO and Kenjiro TERADA:

Reproduction and evaluation of temperature- and strain-rate-dependent nonlinear material behavior of thermoplastic resin by hybrid parameter identification method for a viscoelastic-viscoplastic-damage constitutive model

Transactions of the JSME (in Japanese), Vol. 88, No. 913, pp. 22-00178-22-00178, 2022

DOI: 10.1299/transjsme.22-00178

Saneiki FUJITA, Nilo Lemuel DOLOJAN, Shuji MORIGUCHI, Kenjiro TERADA and Takashi KYOYA:

Three-dimensional limit equilibrium slope stability analysis on real slope failures caused by heavy rain and earthquake

Japanese Geotechnical Journal, Vol. 17, No. 2, pp. 159-169, 2022

DOI: 10.3208/jgs.17.159

Taiki YOSHIDA, Daiki WATANABE, Hasuka KANNO, Shuji MORIGUCHI and Kenjiro TERADA:

QUANTIFICATION OF THE EFFECT OF ROCK SHAPE PROPARTIES ON THE DISTRIBUTION CHARACTERISTICS OF ROCKFALL RUN-OUT

Journal of Japan Society of Civil Engineers, Ser. C (Geosphere Engineering), Vol. 78, No. 3, pp. 210-224, 2022

DOI: 10.2208/jscejge.78.3_210

Naruethep SUKULTHANASORN, Mao KURUMATANI, Koji NISHIGUCHI, K. A. T. O. Junji and Kenjiro TERADA:

Transient thermal porous structure designed by two-scale concurrent topology optimization

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2022, pp. 20220004-20220004, 2022

DOI: 10.11421/jsces.2022.20220004

Reika NOMURA, Saneiki FUJITA, Yu OTAKE, Shuji MORIGUCHI, Shunichi KOSHIMURA, Kenjiro TERADA and Masahiro HASHIZUME:

Real-time tsunami risk evaluation method by synthetic dynamics and Bayesian update

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2022, pp. 20220003-20220003, 2022

DOI: 10.11421/jsces.2022.20220003

Masato SOMEMIYA, Norio HIRAYAMA, Koji YAMAMOTO, Seishiro MATSUBARA and Kenjiro TERADA:

Prediction of Off-Axis Nonlinear Material Behavior for Unidirectional CFRTP Using Numerical Material Tests

Journal of the Japan Society for Composite Materials, Vol. 48, No. 3, pp.96-108, 2022,

Yuichi SHINTAKU, Daiki IMAI and Kenjiro TERADA:

Numerical material testing based on homogenization method for non-periodic media (Formulation using microscopic fluctuation displacement and macroscopic strain)

Transactions of the JSME (in Japanese), Vol. 88, No. 909, pp. 22-00049-22-00049, 2022

DOI: 10.1299/transjsme.22-00049

Yuichi SHINTAKU, Fumitoshi NAKAMURA, Seiichiro TSUTSUMI and Kenjiro TERADA:

An implicit solution for an elastic-plastic model with hardening rule depending on plastic strain range using a primal-dual interior point method

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2022, pp. 20220001-20220001, 2022

DOI: 10.11421/jsces.2022.20220001

Daiki WATANABE, Shuji MORIGUCHI and Kenjiro TERADA:

EFFECT OF PARTICLE SIZE DISTRIBUTIONS ON GRANULAR FLOW SIMULATIONS USING DISCRETE ELEMENT METHOD

Journal of Japan Society of Civil Engineers, Ser. C (Geosphere Engineering), Vol. 77, No. 4, pp. 392-402, 2021

DOI: 10.2208/jscejge.77.4_392

Riichi SUGAI, Yuya YAMAGUCHI, Shuji MORIGUCHI and Kenjiro TERADA:

Application of extended B-spline-based implicit material point method to elastoplastic problems

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2021, pp. 20210022-20210022, 2021

DOI: 10.11421/jsces.2021.20210022

HAN Jike, Seishiro MATSUBARA, Shinnosuke NISHI, Kenji TAKADA, Mayu MURAMATSU, Masaki OMIYA, Kensuke OGAWA, OIDE Kai, Takaya KOBAYASHI, Masanobu MURATA, Shuji MORIGUCHI and Kenjiro TERADA:

Ductile fracture crack phase-field model equipped with a novel degrading fracture toughness

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2021, pp. 20210014-20210014, 2021

DOI: 10.11421/jsces.2021.20210014

Koto Ito, Masaaki Wani, Seiji Saito, Shun Suzuki and Kenjiro Terada:

Development and verification of seismic response analysis method of layered rock mass by using homogenization method

Journal of Japan Society of Civil Engineers, Ser. A1 (Structural Engineering & Earthquake Engineering (SE/EE)), Vol. 77, No. 4, pp. I_394-I_405, 2021

DOI: 10.2208/jscejseee.77.4_I_394

Ryohei Kanezawa, Yuichi Shintaku and Kenjiro Terada:

Cohesive-traction embedded damage-like constitutive law based on non-local approach and its numerical implementation improved by Petrov-Galerkin method

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2021, pp. 20210008-20210008, 2021

DOI: 10.11421/jsces.2021.20210008

Yosuke Yamanaka, Seishiro Matsubara, Risa Saito, Shuji Moriguchi and Kenjiro Terada:

Incremental variational formulation of time evolution of cure-degree along with viscoelasticity for thermosetting resins

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2020, pp. 20200011-20200011, 2020

DOI: 10.11421/jsces.2020.20200011

Jike Han, Shinnosuke Nishi, Kenji Takada, Mayu Muramatsu, Masaki Omiya, Kensuke Ogawa, Kai Oide, Takuya Kobayashi, Masanobu Murata, Shuji Moriguchi and Kenjiro Terada:

A phase-field ductile fracture model with a variable regularization length parameter

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2020, pp. 20200005-20200005, 2020

DOI: 10.11421/jsces.2020.20200005

Kenta Tozato, Takuma Kotani, Ryo Hatano, Shinsuke Takase, Shuji Moriguchi, Kenjiro Terada and Yu Otake:

Tsunami risk assessment using spatial modes extracted from results of numerical analysis

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2020, pp. 20200003-20200003, 2020

DOI: 10.11421/jsces.2020.20200003

Risa Saito, Yuya Yamaguchi, Shuji Moriguchi, Yasuko Mihara, Takaya Kobayashi and Kenjiro Terada:

Determination of macroscopic viscoelastic properties as well as macroscopic thermal deformation and cure-shrinkage properties of fiber reinforced plastics in consideration of cure process

Transactions of the JSME, Vol. 85, No. 870, pp. 18-00396, 2019

DOI: 10.1299/transjsme.18-00396

Ryo Hatano, Seishiro Matsubara, Shuji Moriguchi and Kenjiro Terada:

A data-driven micro-macro coupled multiscale analysis for hyperelastic composite materials

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2019, pp. 20190015-20190015, 2019

DOI: 10.11421/jsces.2019.20190015

Koji Yamamoto, Yoshiteru Ishibashi, Masato Somemiya, Norio Hirayama and Kenjiro Terada:

Computational study on temperature-dependencies of relaxation and elastic properties in anisotropic viscoelastic constitutive law for fiber-reinforced thermoplastic resin

Transactions of the JSME (in Japanese), Vol. 85, No. 874, pp. 19-00058-19-00058, 2019

DOI: 10.1299/transjsme.19-00058

Taishi Kobayashi, Norio Hirayama, Koji Yamamoto and Kenjiro Terada:

Prediction of coefficient of thermal expansion for CFRTP using numerical material testing

Journal of the Japan Society for Composite Materials, Vol. 45, No. 3, pp. 98-104, 2019

URL: http://www.jscm.gr.jp/JSCM/bknumbers/vol45_no3.htm

Kiyomichi Yamaguchi, Kazuto Yamamura, Norio Takeuchi and Kenjiro Terada:

A multi stage failure simulation of framed structure using HPM

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 75, No. 2, pp. I_225-I_236, 2019

DOI: 10.2208/jscejam.75.2_I_225

Shinnosuke Nishi, Kenjiro Terada, İlker Temizer:

Isogeometric homogenization analysis of dry woven fabrics involving micro-scale frictional contact

Transactions of the JSME, Vol. 84, No. 859, pp. 17-00554-17-00554, 2018

DOI: 10.1299/transjsme.17-00554

Reika Nomura, Shinsuke Takase, Shuji Moriguchi and Kenjiro Terada:

Viscosity evaluation of solid-liquid mixture based on direct numerical simulation

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2018, No. 2, pp. 20182007-20182007, 2018

DOI: 10.11421/jsces.2018.20182007

Yo Fukutani, Shuji Moriguchi, Takuma Kotani and Kenjiro Terada:

Probabilistic tsunami loss estimation using response-surface method -Application to sagami trough earthquake-

Journal of Japan Society of Civil Engineers, Ser. B2 (Coastal Engineering), Vol. 74, No. 2, pp. I_463-I_468, 2018

DOI: 10.2208/kaigan.74.I_463

Hasuka Kanno, Shuji Moriguchi, Kenjiro Terada, Shunsuke Hayashi, Yusaku Isobe and Shoji Iwanaga:

Statistical modeling for evaluating the optimal placement of rockfall protection structures on a road

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 74, No. 2, pp. I_13-I_21, 2018

DOI: 10.2208/jscejam.74.I_13

Kouhei Kitou, Takuma Kotani, Yuya Yamaguchi, Shinsuke Takase, Shuji Moriguchi and Kenjiro Terada:

A hazard map based on 3D snow avalanche simulation

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 74, No. 2, pp. I_203-I_211, 2018

DOI: 10.2208/jscejam.74.I_203

Masami Sato, Mayu Muramatsu, Kenjiro Terada, Satoshi Watanabe, Keiji Yashiro, Tatsuya Kawada and Harumi Yokokawa:

Analysis system of transient electrochemo-mechanical simulation of solid oxide fuel cell implemented in commercial fem software

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2017, pp. 20170004-20170004, 2017

DOI: 10.11421/jsces.2017.20170004

Hasuka Kanno, Shuji Moriguchi, Shinsuke Takase, Kenjiro Terada, Kazuhide Sawada and Masanori Konami:

Spatial and probabilistic risk evaluation of rockfalls using Gaussian mixture model

Japanese Geotechnical Journal, Vol. 12, No. 2, pp. 211-221, 2017

DOI: 10.3208/jgs.12.211

Hasuka Kanno, Shuji Moriguchi, Shinsuke Takase and Kenjiro Terada:

A basic study of optimal design method for rockfall countermeasures based on discrete element analysis

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 73, No. 2, pp. I_469-I_476, 2017

DOI: 10.2208/jscejam.73.I_469

Takaya Kobayashi and Kenjiro Terada:

Research trends of computational solid mechanics and their practical applications

SOCIOTECHNICA, Vol. 14, pp. 166-177, 2017

URL: http://shakai-gijutsu.org/vol14/14_167.pdf

Marina Okawa, Shun Suzuki, Shinsuke Takase, Shuji Moriguchi, Kenjiro Terada and Mao Kurumatani:

Characterization of deformation properties of surface ground due to fault movement using finite-strain damage model

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 73, No. 2, pp. I_497-I_505, 2017

DOI: 10.2208/jscejam.73.I_497

Masami Sato, Mayu Muramatsu, Seishiro Matsubara, Shinnosuke Nishi, Kenjiro Terada, Keiji Yashiro and Tatsuya Kawada:

Numerical plate testing for non-linear multi-scale analysis of plate-shaped device

土木学会論文集A2（応用力学）, Vol. 73, No. 2, pp. I_283-I_294, 2017

DOI: 10.2208/jscejam.73.I_283

Shinsuke Takase, Yuya Yamaguchi, Shuji Moriguchi, Kenjiro Terada, Kazuya Nojima and Masaaki Sakuraba:

Fluid-structuer interaction analysis based on finite cover method using shallow water equation

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 73, No. 2, pp. I_305-I_312, 2017

DOI: 10.2208/jscejam.73.I_305

Naohide Uehara, Ikkoh Tachibana, Hasuka Kanno, Shuji Moriguchi, Kenjiro Terada, Shinsuke Takase and Yu Otake:

Effects of spatial characteristics of slope properties in rockfall simulations using dem

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 73, No. 2, pp. I_507-I_516, 2017

DOI: 10.2208/jscejam.73.I_507

Yuya Yamaguchi, Shinsuke Takase, Shuji Moriguchi, Kenjiro Terada, Kenichi Oda and Isao Kamiishi:

Three-dimensional nonstructural finite element analysis of snow avalanche using non-Newtonian fluid model

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2017, pp. 20170011-20170011, 2017

DOI: 10.11421/jsces.2017.20170011

Mao Kurumatani, Shunitsu Abe, Yuto Soma and Kenjiro Terada:

A finite strain isotropic damage model for concrete based on fracture mechanics and modified von-Mises criterion

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 73, No. 1, pp. 11-21, 2017

DOI: 10.2208/jscejam.73.11

Seishiro Matsubara and Kenjiro Terada:

Rheological constitutive model for thermoplastic resin based on viscoplastic-viscoelastic multiplicative decomposition of deformation gradient

Transactions of the JSME, Vol. 82, No. 839, pp. 16-00060-16-00060, 2016

DOI: 10.1299/transjsme.16-00060

Shinnosuke Nishi, Kenjiro Terada, Junji Kato, Shinji Nishiwaki and Kazuhiro Izui:

Multiscale topology optimization for composite plates undergoing thermal displacement

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2016, pp. 20160024-20160024, 2016

DOI: 10.11421/jsces.2016.20160024

Junji Kato, Daishun Yachi, Shunsuke Nishizawa, Shinsuke Takase, Kenjiro Terada and Takashi Kyoya:

Multi-scale topology optimization for hyperelastic composites applying a decoupling multi-scale analysis

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2016, pp. 20160001-20160001, 2016

DOI: 10.11421/jsces.2016.20160001

Seishiro Matsubara, Toshiyuki Saitou, Kai Oide, Hiroto Shin, Manabu Umeda, Yasuhiro Katsuda, Yasuko Mihara, Takaya Kobayashi and Kenjiro Terada:

Constitutive equations of earthenware material during firing processes and determination of their function forms

Transactions of the JSME, Vol. 82, No. 843, pp. 16-00266-16-00266, 2016

DOI: 10.1299/transjsme.16-00266

Shuji Moriguchi, Yuma Ohta, Shinsuke Takase, Kenjiro Terada, Keita Abe and Takayuki Aoki:

A simulation of large scale sediment flow experiment using DEM

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 72, No. 2, pp. I_449-I_457, 2016

DOI: 10.2208/jscejam.72.I_449

Yuichi Shintaku and Kenjiro Terada:

Cohesive-force embedded damage model and its application to crack propagation analyses

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2016, pp. 20160011-20160011, 2016

DOI: 10.11421/jsces.2016.20160011

Junji Kato, Ryosuke Kasai, Takashi Kyoya and Kenjiro Terada:

Evaluation of micro-crack distribution using inverse homogenization method

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 72, No. 1, pp. 27-37, 2016

DOI: 10.2208/jscejam.72.27

Takuma Kotani, Shinsuke Takase, Shuji Moriguchi, Kenjiro Terada, Yo Hukuya, Yu Otake, Kazuya Nojima and Masaaki Sakuraba:

Numerical-analysis-aided probabilistic tsunami hazard evaluation using response surface

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 72, No. 1, pp. 58-69, 2016

DOI: 10.2208/jscejam.72.58

Masami Sato, Takayuki Yamada, Kazuhiro Izui, Shinji Nishiwaki and Kenjiro Terada:

Optimum design of lattice structures based on continuum expression using micropolar continuum theory

Transactions of the JSME, Vol. 82, No. 840, pp. 16-00171-16-00171, 2016

DOI: 10.1299/transjsme.16-00171

Mao Kurumatani, Yuki Nemoto, Yuto Soma and Kenjiro Terada:

3D fracture simulation of reinforced concrete based on fracture mechanics for concrete and its performance assessment

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2016, pp. 20160004-20160004, 2016

DOI: 10.11421/jsces.2016.20160004

Koji Yamamoto, Norio Hirayama and Kenjiro Terada:

Identification of Hill's anisotropic parameters for reinforced plastics based on numerical material test results

Transactions of the JSME, Vol. 82, No. 840, pp. 16-00056-16-00056, 2016

DOI: 10.1299/transjsme.16-00056

Seishiro Matsubara, Kenjiro Terada and Fumio Fujii:

Isogeometric analysis method for heterogeneous periodic microstructures

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2016, pp. 20160010-20160010, 2016

DOI: 10.11421/jsces.2016.20160010

Junji Kato, Daishun Yachi, Shunsuke Nishizawa, Shinsuke Takase, Kenjiro Terada and Takashi Kyoya:

Topology optimization of microstructures for hyperelastic composites based on a decoupling multi-scale analysis

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2015, pp. 20150014-20150014, 2015

DOI: 10.11421/jsces.2015.20150014

Kenjiro Terada, Norio Hirayama, Koji Yamamoto and Seishiro Matsubara:

Numerical plate testing for linear multi-scale analyses of composite plates

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2015, pp. 20150001-20150001, 2015

DOI: 10.11421/jsces.2015.20150001

Seishiro Matsubara and Kenjiro Terada:

Finite strain viscoelasto-viscoplastic constitutive model for thermoplastic resins in consideration of self-heating phenomenon

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 71, No. 2, pp. I_509-I_520, 2015

DOI: 10.2208/jscejam.71.I_509

Shuji Moriguchi, Yu Otake, Shinsuke Takase, Kenjiro Terada, Yuji Kosaka, Masaru Horiuchi, Kazuhide Sawada and Atsushi Yashima:

Probabilistic risk evaluation of rockfalls using DEM

Japanese Geotechnical Journal, Vol. 10, No. 4, pp. 503-515, 2015

DOI: 10.3208/jgs.10.503

Shuji Moriguchi, Yuta Hiruma, Shinsuke Takase and Kenjiro Terada:

Effects of particle size and particle shape in flow simulations of dry sand using DEM

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 71, No. 2, pp. I_587-I_594, 2015

DOI: 10.2208/jscejam.71.I_587

Takashi Ushida, Kiwamu Tsuno, Takashi Nakayama, Shinsuke Takase, Kenjiro Terada and Takashi Kyoya:

A prediction model of steel corrosion in concrete based on reaction-diffusion equation

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 71, No. 1, pp. 34-45, 2015

DOI: 10.2208/jscejam.71.34

Takashi Ushida, Takashi Nakayama, Kiwamu Tsuno, Keisuke Shimamoto, Shinji Yakita, Kenjiro Terada and Takashi Kyoya:

Field data analysis and future prediction method of material deteriorations in cut-and-cover tunnels

Journal of Japan Society of Civil Engineers, Ser. F1 (Tunnel Engineering), Vol. 71, No. 1, pp. 41-53, 2015

DOI: 10.2208/jscejte.71.41

Shinnosuke Nishi, Kenjiro Terada and Junji Kato:

Topology optimization of cross-section structure for thick composite plate

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 71, No. 2, pp. I_245-I_254, 2015

DOI: 10.2208/jscejam.71.I_245

Reika Nomura, Shinsuke Takase, Kenjiro Terada and Shuji Moriguchi:

Multiscale numerical experiment for evaluating disaster-reduction characteristics of tide-protection forest

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 71, No. 2, pp. I_193-I_201, 2015

DOI: 10.2208/jscejam.71.I_193

Shinsuke Takase, Shuji Moriguchi, Kenjiro Terada, Naoki Koyama, Kenji Kaneko, Mao Kurumatani, Junji Kato and Takashi Kyoya:

Finite cover based fluid-structure interaction analysys including fracture of structure

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 71, No. 2, pp. I_203-I_212, 2015

DOI: 10.2208/jscejam.71.I_203

Yuki Yamakawa, Hiroki Mizoe, Yutaka Chida, Jo Toda, Kiyohiro Ikeda, Hiroshi Tamura and Kenjiro Terada:

Uplift capacity analysis of anchor foundation for transmission tower on slope crest

Journal of Japan Society of Civil Engineers, Ser. C (Geosphere Engineering), Vol. 71, No. 1, pp. 1-13, 2015

DOI: 10.2208/jscejge.71.1

Junji Kato, Hiroya Hoshiba, Shinsuke Takase, Kenjiro Terada and Takashi Kyoya:

Accuracy validation of analytical sensitivity in topology optimization for elastoplastic composites

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2014, pp. 20140012-20140012, 2014

DOI: 10.11421/jsces.2014.20140012

Junji Kato, Yoshiki Kamo, Shinsuke Takase, Shuji Moriguchi, Mao Kurumatani, Kenjiro Terada and Takashi Kyoya:

Preliminary investigation of phase-field topology optimization for microstructures

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 70, No. 2, pp. I_173-I_183, 2014

DOI: 10.2208/jscejam.70.I_173

Hiroya Hoshiba, Junji Kato, Shinsuke Takase, Kenjiro Terada and Takashi Kyoya:

Multiphase topology optimization considering elastoplastic cyclic deformation and accuracy validation of analytical sensitivity

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 70, No. 2, pp. I_317-I_328, 2014

DOI: 10.2208/jscejam.70.I_317

Yuichi Shintaku, Mayu Muramatsu, Seiichiro Tsutsumi, Kenjiro Terada, Takashi Kyoya, Junji Kato and Shuji Moriguchi:

An analysis of fatigue crack propagation in pollycrystalline metals using cohesive zone model with damage variable

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2014, pp. 20140014-20140014, 2014

DOI: 10.11421/jsces.2014.20140014

Seishiro Matsubara, Yusuke Arakawa, Junji Kato, Kenjiro Terada, Takashi Kyoya, Yuta Ueno, Naohiro Miyanaga, Norio Hirayama and Koji Yamamoto:

De-coupled multi-scale analyses of fiber-reinforced composites by elastic-creep-damage combined model

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2014, pp. 20140004-20140004, 2014

DOI: 10.11421/jsces.2014.20140004

Shinya Kamino, Mao Kurumatani, Kenjiro Terada, Takashi Kyoya and Kazuo Kashiyama:

Simulation of compressive failure in quasi-brittle materials involving contact on crack interfaces

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2014, pp. 20140006-20140006, 2014

DOI: 10.11421/jsces.2014.20140006

Ikkoh Tachibana, Shuji Moriguchi, Kenjiro Terada, Shinsuke Takase, Takashi Kyoya and Junji Kato:

Quantitative relationship between shape representation quality and calculation accuracy

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 70, No. 2, pp. I_519-I_530, 2014

DOI: 10.2208/jscejam.70.I_519

Shinsuke Takase, Junji Kato, Shuji Moriguchi, Kenjiro Terada, Takashi Kyoya, Kazuya Nojima, Masaaki Sakuraba and Kazuo Kashiyama:

Tsunami simulation using 2D-3D hybrid method based on stabilized finite element method

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 70, No. 2, pp. I_307-I_315, 2014

DOI: 10.2208/jscejam.70.I_307

Tomohiro Ishida, Shinpei Shibutani, Junji Kato, Kenjiro Terada, Takashi Kyoya, Daisuke Ando and Junichi Koike:

Deformation and strength characterization of Mg alloys with rolled crystallographic textures by crystal plasticity finite element method

TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, Vol. 79, No. 808, pp. 1840-1851, 2013

DOI: 10.1299/kikaia.79.1840

Daishun Yachi, Junji Kato, Shinsuke Takase, Kenjiro Terada and Takashi Kyoya:

Analytical sensitivity analysis for decoupling multi-scale topology optimization of composites

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2013, pp. 20130022-20130022, 2013

DOI: 10.11421/jsces.2013.20130022

Mao Kurumatani, Shinya Kamino and Kenjiro Terada:

Simulation of compressive failure in concrete by focusing on heterogeneity due to coarse aggregates

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 69, No. 2, pp. I_115-I_123, 2013

DOI: 10.2208/jscejam.69.I_115

Mao Kurumatani, Kenjiro Terada, Takashi Kyoya, Junji Kato and Kazuo Kashiyama:

Discrete analysis method for fracture simulation using structural elements

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2013, pp. 20130010-20130010, 2013

DOI: 10.11421/jsces.2013.20130010

Mao Kurumatani, Kenjiro Terada, Junji Kato, Takashi Kyoya and Kazuo Kashiyama:

An isotropic damage model based on fracture mechanics for concrete and its evaluation

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2013, pp. 20130015-20130015, 2013

DOI: 10.11421/jsces.2013.20130015

Junji Kato, Daishun Yachi, Shinsuke Takase, Kenjiro Terada and Takashi Kyoya:

Three dimensional multi-scale topology optimization of composites

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 69, No. 2, pp. I_133-I_144, 2013

DOI: 10.2208/jscejam.69.I_133

Takashi Sasagawa, Ken Takahashi, Kenjiro Terada and Tatsuya Kawada:

Estimation of macroscopic material properties using sintering simulation of porous microstructure affected by mechanical effects

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2012, pp. 20120004-20120004, 2012

URL: https://www.jstage.jst.go.jp/article/jsces/2012/0/2012_0_20120004/_article/-char/en

Junji Kato, Kenjiro Terada and Takashi Kyoya:

Topology optimization of microstructure for composites considering macroscopic structural response

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 68, No. 2, pp. I_279-I_287, 2012

DOI: 10.2208/jscejam.68.I_279

Tomohiro Ishida, Shinpei Shibutani, Junji Kato, Kenjiro Terada, Takashi Kyoya, Daisuke Ando and Junichi Koike:

A new constitutive model for crystal plasticity with deformation twinning

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2012, pp. 20120014-20120014, 2012

URL: https://www.jstage.jst.go.jp/article/jsces/2012/0/2012_20120014/_article/-char/en

Mao Kurumatani and Kenjiro Terada:

A comparative study on PU-based finite element methods for approximating strong/weak discontinuities

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 68, No. 2, pp. I_129-I_138, 2012

DOI: 10.2208/jscejam.68.I_129

Masato Nakamura, Shinsuke Takase, Kazuo Kashiyama, Kenjiro Terada and Mao Kurumatani:

A simulation method for fluid-structure interaction problems with free surface based on the finite cover method

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 67, No. 2, pp. I_199-I_208, 2011

DOI: 10.2208/jscejam.67.I_199

Junji Kato, Keiichiro Ishii, Kenjiro Terada and Takashi Kyoya:

Numerical investigation of optimal layout of rockbolts for ground structures

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 67, No. 2, pp. I_107-I_116, 2011

DOI: 10.2208/jscejam.67.I_107

Junji Kato, Ekkehard Ramm, Kenjiro Terada and Takashi Kyoya:

Material shape optimization for fiber reinforced composites applying a damage formulation

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 67, No. 1, pp. 54-68, 2011

DOI: 10.2208/jscejam.67.54

Junji Kato, Ekkehard Ramm, Kenjiro Terada and Takashi Kyoya:

Multiphase material optimization for fiber reinforced composites considering strain softening

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 67, No. 1, pp. 39-53, 2011

DOI: 10.2208/jscejam.67.39

Takashi Yamamoto, Shinichi Maruyama, Kazuhiro Izui, Shinji Nisiwaki and Kenjiro Terada:

Equivalent properties of sound absorbing poroelastic material using the homogenization method

TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, Vol. 77, No. 773, pp. 75-88, 2011

DOI: 10.1299/kikaic.77.75

Mao Kurumatani, Kenjiro Terada and Takashi Kyoya:

Study on wave propagation analyses in heterogeneous materials using X-FEM

Journal of Japan Society of Civil Engineers, Ser. A2 (Applied Mechanics (AM)), Vol. 67, No. 1, pp. 69-81, 2011

DOI: 10.2208/jscejam.67.69

Takashi Yamamoto, Shinichi Maruyama, Kazuhiro Izui, Shinji Nishiwaki and Kenjiro Terada:

A model for sound-absorbing poroelastic material using multiscale analysis(mechanical systems)

Transactions of the Japan Society of Mechanical Engineers Series C, Vol. 76, No. 768, pp. 2039-2048, 2010

DOI: 10.1299/kikaic.76.2039

Ikumu Watanabe and Kenjiro Terada:

An evaluation method of macroscopic yield strength for polycrystalline metals subjected to plastic forming by micro-macro decoupling analysis

Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 76, No. 766, pp. 752-760, 2010

DOI: 10.1299/kikaia.76.752

Akira Ishikawa, Kenjiro Terada, Takashi Kyoya and Yasuhiro Shamoto:

Multi-scale analysis method for partially improved grounds by using a newly proposed nonlinear elastic constitutive model

Doboku Gakkai Ronbunshuu C, Vol. 66, No. 1, pp. 145-155, 2010

DOI: 10.2208/jscejc.66.145

Akira Ishikawa, Kenjiro Terada, Takashi Kyoya and Yasuhiro Shamoto:

Verification of multi-scale analysis for partially improved grounds by centrifugal experiments and its application to in-situ load-settlement problem

Doboku Gakkai Ronbunshuu C, Vol. 66, No. 2, pp. 332-341, 2010

DOI: 10.2208/jscejc.66.332

Mao Kurumatani, Kenjiro Terada and Norio Takeuchi:

Meso-scale behavior of fractureprocess zone in quasi-brittele materials induced by micro-micro-crack interaction

Doboku Gakkai Ronbunshuu A, Vol. 66, No. 3, pp. 505-515, 2010

DOI: 10.2208/jsceja.66.505

Kenjiro Terada, Yasuaki Hamana and Norio Hirayama:

A method of viscoelastic two-scale analyses for FRP

Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 75, No. 760, pp. 1674-1683, 2009

DOI: 10.1299/kikaia.75.1674

Mao Kurumatani and Kenjiro Terada:

Mechanism of size effect in quasi-brittle materials by focusing on the micro-crack formations

Doboku Gakkai Ronbunshuu A, Vol. 65, No. 1, pp. 216-227, 2009

DOI: 10.2208/jsceja.65.216

Mao Kurumatani, Kenjiro Terada, Takashi Kyoya and Tomohisa Hashizume:

A method of discrete crack growth analysis for quasi-brittle materials and numerical study of mixed-mode fracture of concrete

Doboku Gakkai Ronbunshuu A, Vol. 65, No. 1, pp. 165-177, 2009

DOI: 10.2208/jsceja.65.165

Kenjiro Terada, Takenori Inugai, Hiroaki Hamana, Akio Miyori and Norio Hirayama:

Parameter identification for anisotropic hyperelastic materials by numerical material testing

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2008, pp. 20080024-20080024, 2008

URL: https://www.jstage.jst.go.jp/article/jsces/2008/0/2008_0_20080024/_article/-char/en

Kenjiro Terada, Takenori Inugai and Norio Hirayama:

A method of numerical material testing in nonlinear multiscale material analyses

Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 74, No. 744, pp. 1084-1094, 2008

DOI: 10.1299/kikaia.74.1084

Mao Kurumatani, Kenjiro Terada and Hiroshi Okuyama:

Multi-scale thermo-elastic coupled analysis of porous media based on the homogenization method in consideration of the size of microstructures

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2008, pp. 20080029-20080029, 2008

URL: https://www.jstage.jst.go.jp/article/jsces/2008/0/2008_0_20080029/_article/-char/en

Ikumu Watanabe, Kenjiro Terada and Masayoshi Akiyama:

Grain size dependence of tensile strength of polycrystalline metals by crystal-plasticity-damage multi-scale analyses

Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 74, No. 739, pp. 412-418, 2008

DOI: 10.1299/kikaia.74.412

Mao Kurumatani and Kenjiro Terada:

Multi-scale multi-physics analysis for deterioration of quasi-brittle materials involving micro-crack propagations

Doboku Gakkai Ronbunshuu A, Vol. 64, No. 2, pp. 363-375, 2008

DOI: 10.2208/jsceja.64.363

Mao Kurumatani and Kenjiro Terada:

An explicit solution algorithm for cohesive crack model and its evaluation

Doboku Gakkai Ronbunshuu A, Vol. 64, No. 3, pp. 627-638, 2008

DOI: 10.2208/jsceja.64.627

Mao Kurumatani and Kenjiro Terada:

A method for crack propagation analysis incorporated with nodal-integration FEM

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2008, pp. 20080002-20080002, 2008

URL: https://www.jstage.jst.go.jp/article/jsces/2008/0/2008_0_20080002/_article/-char/en

Mao Kurumatani and Kenjiro Terada:

Development of global-local finite cover method and its application to the analysis of crack growth in concrete due to reinforcement corrosion

Doboku Gakkai Ronbunshuu A, Vol. 64, No. 1, pp. 16-26, 2008

DOI: 10.2208/jsceja.64.16

Mao Kurumatani, Takashi Kojima and Kenjiro Terada:

Performance assessment of nodal-integration finite element method

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2007, pp. 20070015-20070015, 2007

URL: https://www.jstage.jst.go.jp/article/jsces/2007/0/2007_0_20070015/_article/-char/en

Mao Kurumatani, Kenjiro Terada and Makoto Hisada:

On analysis models of reinforced corrosion and their crack behavior of concrete

Journal of Japan Society of Civil Engineers, Ser. A, Vol. 63, No. 1, pp. 167-178, 2007

DOI: 10.2208/jsceja.63.167

Ikumu Watanabe and Kenjiro Terada:

Multi-scale analysis for polycrystalline metals with continuum damage model

Doboku Gakkai Ronbunshuu A, Vol. 62, No. 4, pp. 772-781, 2006

DOI: 10.2208/jsceja.62.772

Tateki Ishii, Takashi Kyoya, Kenjiro Terada and Yuji Kishino:

Failure analysis involving frictional contact on crack interfaces

Doboku Gakkai Ronbunshuu A, Vol. 62, No. 2, pp. 371-383, 2006

DOI: 10.2208/jsceja.62.371

Mao Kurumatani and Kenjiro Terada:

Finite cover method with multi-cover modeling —Fracture simulation of quasi-brittle heterogeneous solids—

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2006, pp. 20060029-20060029, 2006

URL: https://www.jstage.jst.go.jp/article/jsces/2006/0/2006_0_20060029/_article/-char/en

Mao Kurumatani and Kenjiro Terada:

A multi-scale heat conduction analysis method for porous media in consideration of microscopic heat transfer

Doboku Gakkai Ronbunshuu A, Vol. 62, No. 4, pp. 822-834, 2006

DOI: 10.2208/jsceja.62.822

Mao Kurumatani and Kenjiro Terada:

A multi-scale multi-physics analysis method for mass concentration and deformation problems

Doboku Gakkai Ronbunshuu A, Vol. 62, No. 2, pp. 425-439, 2006

DOI: 10.2208/jsceja.62.425

Mao Kurumatani and Kenjiro Terada:

On finite element mesh connection methods for domain decomposition problems

Doboku Gakkai Ronbunshuu A, Vol. 62, No. 2, pp. 345-361, 2006

DOI: 10.2208/jsceja.62.345

Mao Kurumatani and Kenjiro Terada:

Examination of finite cover approximations for imposing interface compatibility conditions in generalized elements — A sort of patch tests —

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2006, pp. 20060014-20060014, 2006

URL: https://www.jstage.jst.go.jp/article/jsces/2006/0/2006_0_20060014/_article/-char/en

Yasunori Maeda, Shinji Nishiwaki, Kazuhiro Izui, Masataka Yoshimura, Kazumi Matsui and Kenjiro Terada:

Topology optimization of mechanical structures targeting vibration characteristics

Transactions of the Japan Society of Mechanical Engineers Series C, Vol. 71, No. 703, pp. 813-820, 2005

DOI: 10.1299/kikaic.71.813

Ikumu Watanabe and Kenjiro Terada:

A study on stress update algorithm and linearization scheme for single crystal plasticity

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2005, pp. 20050014-20050014, 2005

URL: https://www.jstage.jst.go.jp/article/jsces/2005/0/2005_0_20050014/_article/-char/en

Tateki Ishii, Kenjiro Terada, Takashi Kyoya and Yuji Kishino:

Development of fracture simulation by the finite cover method with interface element

54rd NCTAM papers, National Congress of Theoretical and Applied Mechanics, Japan, pp. 212-212, 2005

DOI: 10.11345/japannctam.54.0.212.0

Mao Kurumatani and Kenjiro Terada:

Approximation properties of generalized elements in higher-order finite cover approximation

Doboku Gakkai Ronbunshu, Vol. 2005, No. 794, pp. 794_131-794_142, 2005

DOI: 10.2208/jscej.2005.794_131

Masayoshi Akiyama, Kazumi Matsui and Kenjiro Terada:

Analysis of Microscopic Yielding Behaviour of Carbon Steel under Macroscopic Loading

Tetsu-to-Hagane, Vol. 91, No. 11, pp. 803-808, 2005

DOI: 10.2355/tetsutohagane1955.91.11_803

Ikumu Watanabe, Kenjiro Terada, Kazumi Matsui, Masayoshi Akiyama and Yutaka Neishi:

Evaluation of induced anisotropy in polycrystalline metals based on homogenization method

Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 70, No. 699, pp. 1558-1565, 2004

DOI: 10.1299/kikaia.70.1558

Mitsuteru Asai, Michihiro Yamagishi, Kenjiro Terada and Gakuji Nagai:

A non-local voxel finite element method and its application to failure analyses

Doboku Gakkai Ronbunshu, Vol. 2004, No. 759, pp. 233-245, 2004

DOI: 10.2208/jscej.2004.759_233

Akira Hosoyama, Shinji Nishiwaki, Kazuhiro Izui, Masataka Yoshimura, Kazumi Matsui and Kenjiro Terada:

Structural Topology Optimization of Compliant Mechanisms

Transactions of the Japan Society of Mechanical Engineers Series C, Vol. 70, No. 696, pp. 2384-2391, 2004

DOI: 10.1299/kikaic.70.2384

Kai Oide, Tsuyoshi Ichimura, Yoshiteru Ishibashi and Kenjiro Terada:

Hierarchical finite elements for average bahavior of composite structures

Doboku Gakkai Ronbunshu, Vol. 2003, No. 745, pp. 15-24, 2003

DOI: 10.2208/jscej.2003.745_15

Mitsuteru Asai, Kenjiro Terada, Kiyohiro Ikeda, Hiroyuki Suyama and Katashi Fujii:

Meso-scopic numerical analysis of concrete structures by a modified lattice model

Doboku Gakkai Ronbunshu, Vol. 2003, No. 731, pp. 19-30, 2003

DOI: 10.2208/jscej.2003.731_19

Ken Ooue, Isao Saiki, Kenjiro Terada and Akinori Nakajima:

Nonlinear multi-scale modeling with frame elements for cellular materials

Doboku Gakkai Ronbunshu, Vol. 2003, No. 724, pp. 249-256, 2003

DOI: 10.2208/jscej.2003.724_249

Yuki Yamakawa, Kiyohiro Ikeda, Kenjiro Terada, Keisuke Satoh and Kunio Torii:

Finite deformation analysis for shear band bifurcation mode and progress of discontinuous displacement field

Doboku Gakkai Ronbunshu, Vol. 2003, No. 743, pp. 59-76, 2003

DOI: 10.2208/jscej.2003.743_59

Isao Saiki, Ken Ooue, Kenjiro Terada and Akinori Nakajima:

Multi-scale analysis of cellular materials with frame elements by nonlinear homogenization

Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 69, No. 680, pp. 786-793, 2003

DOI: 10.1299/kikaia.69.786

Kazumi Matsui and Kenjiro Terada:

Topology optimization method by continuous approximation of material distribution

Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 69, No. 684, pp. 1257-1264, 2003

DOI: 10.1299/kikaia.69.1257

Mao Kurumatani and Kenjiro Terada:

Approximation properties of generalized elements in finite cover method

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2003, pp. 20030027-20030027, 2003

URL: https://www.jstage.jst.go.jp/article/jsces/2003/0/2003_0_20030027/_article/-char/en

Isao Saiki, Ken Ooue, Akinori Nakajima and Kenjiro Terada:

Multi-scale Modeling for Microstructures with Structural Elements and its Application to Cellular Solids

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2002, pp. 20020004-20020004, 2002

URL: https://www.jstage.jst.go.jp/article/jsces/2002/0/2002_0_20020004/_article/-char/en

Kiho Lee, Motoki Kazama and Kenjiro Terada:

Undrained shear characteristics of dredged sluges mixed with crashed oyster shell

Doboku Gakkai Ronbunshu, Vol. 2002, No. 701, pp. 303-314, 2002

DOI: 10.2208/jscej.2002.701_303

Yuuki Yamakawa, Kenjiro Terada, Kiyohiro Ikeda and Kunio Torii:

Bifurcation analysis and path jumping behavior of elasto-plastic body under compression

Doboku Gakkai Ronbunshu, Vol. 2002, No. 701, pp. 73-86, 2002

DOI: 10.2208/jscej.2002.701_73

Kai Oide, Kiyohiro Ikeda, Kenjiro Terada, Katashi Fujii and Shigenobu Okazawa:

Stochastic evaluation method for the strength of structural members based on bifurcation theory

Doboku Gakkai Ronbunshu, Vol. 2002, No. 696, pp. 85-98, 2002

DOI: 10.2208/jscej.2002.696_85

Kazumi Matsui, Kenjiro Terada, Masayoshi Akiyama, Takashi Kuboki and Kenji Oikawa:

Mechanism of the Bauschinger effect by the multi-scale modeling

Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 68, No. 675, pp. 1559-1566, 2002

DOI: 10.1299/kikaia.68.1559

Kenji Kaneko, Kenjiro Terada, Takashi Kyoya and Yuji Kishino:

Development of a multiscale analysis method for granular materials based on homogenization theory

Doboku Gakkai Ronbunshu, Vol. 2001, No. 680, pp. 183-199, 2001

DOI: 10.2208/jscej.2001.680_183

Kazumi Matsui, Kenjiro Terada, Takashi Kyoya and Tetsuo Iwakuma:

Estimate of the macroscopic yield surface for the elastic-plastic composite materials

Doboku Gakkai Ronbunshu, Vol. 2001, No. 682, pp. 335-346, 2001

DOI: 10.2208/jscej.2001.682_335

Shigenobu Okazawa, Daiju Terasawa, Kiyohiro Ikeda and Kenjiro Terada:

Shape effects of necking bifurcation in tensile steel specimens

Doboku Gakkai Ronbunshu, Vol. 2001, No. 675, pp. 351-354, 2001

DOI: 10.2208/jscej.2001.675_351

Takashi Kyoya and Kenjiro Terada:

A multiscale structural analysis and its application to a strength evaluation for fissured media

Doboku Gakkai Ronbunshu, Vol. 2001, No. 680, pp. 49-64, 2001

DOI: 10.2208/jscej.2001.680_49

Naoki Takano, Kenjiro Terada and Masaru Zako:

Three-dimensional evaluation of permeability of fiber reinforced composite materials based on their microstructures

Journal of the Society of Materials Science, Japan, Vol. 50, No. 5, pp. 488-494, 2001

DOI: 10.2472/jsms.50.488

Kazumi Matsui, Kenjiro Terada, Shinji Nishiwaki and Yoshiteru Ishibashi:

Consistent topology optimization method for structures with finite deformation

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2001, pp. 20010046-20010046, 2001

DOI: 10.11421/jsces.2001.20010046

Naoki Takano, Kenjiro Terada, Masaru Zako and Tomomi Yoshioka:

Evaluation of permeability of resin in textile composites by the homogenization method

Journal of the Japan Society for Composite Materials, Vol. 26, No. 5, pp. 171-178, 2000

DOI: 10.6089/jscm.26.171

Kiho Lee, Motoki Kazama, Kenjiro Terada and Eiji Yanagisawa:

Permeability characteristics of dredged sluges mixed with crashed oyster shell

Doboku Gakkai Ronbunshu, Vol. 2000, No. 652, pp. 245-256, 2000

DOI: 10.2208/jscej.2000.652_245

Kenjiro Terada, Kazumi Matsui and Atsushi Mano:

Micro-macro modeling of nonlinear mechanical behaviors based on the homogenization theory

Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 66, No. 643, pp. 516-523, 2000

DOI: 10.1299/kikaia.66.516

Kenjiro Terada, Isao Saiki and Kazumi Matsui:

Kinematically correct formulation for two-scale finite deformation problems

Transactions of the Japan Society for Computational Engineering and Science, Vol. 2000, pp. 20000006-20000006, 2000

URL: https://www.jstage.jst.go.jp/article/jsces/2000/0/2000_0_20000006/_article/-char/en

Takashi Kyoya, Kenjiro Terada and Lizhu Oyang:

Evaluation of deformability and strength of rock mass using properties of intact rocks and digital image of crack distribution

Doboku Gakkai Ronbunshu, Vol. 1999, No. 631, pp. 131-150, 1999

DOI: 10.2208/jscej.1999.631_131

Kenjiro Terada and Noboru Kikuchi:

A generalized algorithm for multiscale analysis of heterogeneous elastic-plastic bodies

Doboku Gakkai Ronbunshu, Vol. 1999, No. 633, pp. 217-229, 1999

DOI: 10.2208/jscej.1999.633_217

Kenjiro Terada and Takashi Kyoya:

Method of multiscale stress analysis for a medium with inifinitely many fissures

Doboku Gakkai Ronbunshu, Vol. 1999, No. 619, pp. 23-33, 1999

DOI: 10.2208/jscej.1999.619_23

Kenjiro Terada and Kazumi Matsui:

Numerical solutions of multi-scale structural analyses for elastoplastic bodies

Transactions of the Japan Society for Computational Engineering and Science, Vol. 1999, pp. 19990008-19990008, 1999

URL: https://www.jstage.jst.go.jp/article/jsces/1999/0/1999_0_19990008/_article/-char/en

Katsuyuki Suzuki, Hideomi Ohtsubo, Kenjiro Terada and Daisuke Kobayashi:

Optimal design of golf club using multibody dynamics

Transactions of the Japan Society for Computational Engineering and Science, Vol. 1999, pp. 19990011-19990011, 1999

URL: https://www.jstage.jst.go.jp/article/jsces/1999/0/1999_0_19990011/_article/-char/en

Kenjiro Terada, Kazuyuki Nakahata and Michihiro Kitahara:

An evaluation method of macroscopic shape of defects in microscopically inhomogeneous materials

Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 65, No. 631, pp. 552-559, 1999

DOI: 10.1299/kikaia.65.552

Kenjiro Terada and Noboru Kikuchi:

Application of the asymptotic homogenization method for composites with irregular material configurations

Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 64, No. 617, pp. 162-169, 1998

DOI: 10.1299/kikaia.64.162

Kenjiro Terada, Takashi Ito and Noboru Kikuchi:

A study on the homogenization method for solid-fluid mixtures from engineering viewpoints

Doboku Gakkai Ronbunshu, Vol. 1998, No. 591, pp. 85-97, 1998

DOI: 10.2208/jscej.1998.591_85

Kenjiro Terada and Noboru Kikuchi:

Microstructural modeling technique for homogenization analysis using digital images

Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 64, No. 617, pp. 170-177, 1998

DOI: 10.1299/kikaia.64.170

Kenjiro Terada, Takashi Ito and Noboru Kikuchi:

Viscoelastic constitutive law as an asymptotic behavior in the homogenization method for solid-fluid mixtures

Doboku Gakkai Ronbunshu, Vol. 1998, No. 591, pp. 99-109, 1998

DOI: 10.2208/jscej.1998.591_99

Katsuyuki Suzuki, Kenjiro Terada, Hideomi Ohtsubo and Naoki Yonesato:

The analysis method of solid structure using voxel data

J. SNAJ, Nihon zousen gakkai ronbunshu, Vol. 1997, No. 182, pp. 595-600, 1997

DOI: 10.2534/jjasnaoe1968.1997.182_595

Kenjiro Terada, Kohei Yuge and Noboru Kikuchi:

Elastoplastic analysis of composite materials using the homogenization method: 2nd report, numerical analysis

Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 62, No. 601, pp. 2072-2079, 1996

DOI: 10.1299/kikaia.62.2072

Kenjiro Terada, Kohei Yuge and Noboru Kikuchi:

Elasto-plastic analysis of composite materials using the homogenization method: 1st report, formulation

Transactions of the Japan Society of Mechanical Engineers Series A, Vol. 61, No. 590, pp. 2199-2205, 1995

DOI: 10.1299/kikaia.61.2199

Mao Kurumatani, Tatsuya Yumoto, Kenjiro Terada, Takashi Kyoya and Mitsuyoshi Akiyama:

Study for evaluating fracture-toughness in quasi-brittle materials based on the energy valance of structures

J. Appl. Mech., Vol. 13, pp. 313-322, 2010

URL: http://library.jsce.or.jp/jsce/open/00561/2010/13-0313.pdf

Takashi Sasagawa, Mao Kurumatani, Kenjiro Terada, Tetsushi Kanda, Jin-Hwan Jeon, Haruki Momose:

Strength evaluation of ultra high-strength cement paste by crack propagation analysis of microstructure

J. Appl. Mech., Vol. 13, pp. 283-291, 2010

URL: http://library.jsce.or.jp/jsce/open/00561/2010/13-0283.pdf

Satoshi Iwata, Mao Kurumatani, Kenjiro Terada, Shigenobu Okazawa and Kazuo Kashiyama:

Meso-scale dynamic fracture simulation of concrete in tension under high strain-rate

J. Appl. Mech., Vol. 12, pp. 311-319, 2009

URL: http://library.jsce.or.jp/jsce/open/00561/2009/12-0311.pdf

Shigenobu Okazawa, Mao Kurumatani, Hideyuki Terasawa, Kenjiro Terada and Kazuo Kashiyama:

A study of large deformation solid dynamics using Eulerian finte cover method

J. Appl. Mech., Vol. 12, pp. 195-203, 2009

URL: http://library.jsce.or.jp/jsce/open/00561/2009/12-0195.pdf

Tatsuya Yumoto, Mao Kurumatani, Masaki Yamada, Kenjiro Terada and Takashi Kyoya:

A method for evaluating fracture energy of quasibrittle materials using cohesivecrack model

J. Appl. Mech., Vol. 11, pp. 351-359, 2008

DOI: 10.2208/journalam.11.351

Ikumu Watanabe and Kenjiro Terada:

Veryfication study of micro-macro decoupling analysis on three dimentional plastic forming problem

J. Appl. Mech., Vol. 11, pp. 123-131, 2008

DOI: 10.2208/journalam.11.123

Mao Kurumatani, Kenjiro Terada and Takashi Kyoya:

Application of the explicit solution algorithm for cohesive crack model to three-dimensional crack propagation analysis of quasi-brittle materials

J. Appl. Mech., Vol. 11, pp. 211-220, 2008

DOI: 10.2208/journalam.11.211

Mao Kurumatani, Satoshi Iwata, Kenjiro Terada, Shigenobu Okazawa and Kazuo Kashiyama:

A method of dynamic fracture analysis for quasi-brittle materials by means of cohesive crack model

J. Appl. Mech., Vol. 11, pp. 201-209, 2008

DOI: 10.2208/journalam.11.201

Tateki Ishii, Takashi Kyoya and Kenjiro Terada:

Effects of frictional slip between crack interfaces to crack growth in quasi-brittle solids

J. Appl. Mech., Vol. 10, pp. 343-350, 2007

DOI: 10.2208/journalam.10.343

Eduardo Alberto de Souza Neto, Djordje Peric, Ikumu Watanabe and Kenjiro Terada:

The importance of finite element performance for characterizing the macroscopic material behavior with two-scale finite element analysis for polycrystalline metals

J. Appl. Mech., Vol. 10, pp. 167-174, 2007

DOI: 10.2208/journalam.10.167

Mao Kurumatani and Kenjiro Terada:

Image-based nodal-integration finite element method for non-linear analyses of composite materials

J. Appl. Mech., Vol. 10, pp. 91-100, 2007

DOI: 10.2208/journalam.10.91

Tateki Ishii, Takashi Kyoya, Naoki Nishizawa and Kenjiro Terada:

Multiscale analysis method for quasi-brittle heterogeneous materials involving micro-crack propagations

J. Appl. Mech., Vol. 9, pp. 273-282, 2006

DOI: 10.2208/journalam.9.273

Mao Kurumatani, Masahiro Ishihata, Tateki Ishii and Kenjiro Terada:

Analysis of crack-paths in concrete due to reinforcement corrosion and their underlying mechanism

J. Appl. Mech., Vol. 9, pp. 185-194, 2006

DOI: 10.2208/journalam.9.185

Masaki Yamada, Hiroyuki Miyakoshi and Kenjiro Terada:

Development of numerical simulator by coupled electro-mechanical analysis of ultrasonic piezoelectric transducer

J. Appl. Mech., Vol. 9, pp. 1121-1129, 2006

DOI: 10.2208/journalam.9.1121

Ikumu Watanabe and Kenjiro Terada:

Decoupled micro-macro analysis method for two-scale BVPs in nonlinear homogenization theory

J. Appl. Mech., Vol. 8, pp. 277-285, 2005

DOI: 10.2208/journalam.8.277

Tateki Ishii, Kenjiro Terada, Takashi Kyoya, Yuji Kishino and Mao Kurumatani:

An application of discontinuous Galerkin finite cover method to discontinuous deformation analysis

J. Appl. Mech., Vol. 8, pp. 327-334, 2005

DOI: 10.2208/journalam.8.327

Mao Kurumatani and Kenjiro Terada:

Development of discontinuous Galerkin finite cover method and its evaluation

J. Appl. Mech., Vol. 8, pp. 215-224, 2005

DOI: 10.2208/journalam.8.215

Ikumu Watanabe, Atsushi Maruyama, Kenjiro Terada, Masayoshi Akiyama and Michihiro Kitahara:

Evaluation of grain effects by multi-scale modeling based on homogenization method for polycrystalline metals

J. Appl. Mech., Vol. 7, pp. 365-371, 2004

DOI: 10.2208/journalam.7.365

Mao Kurumatani, Kenjiro Terada and Michihiro Kitahara:

Three-dimensional finite cover method with interface elements

J. Appl. Mech., Vol. 7, pp. 441-450, 2004

DOI: 10.2208/journalam.7.441

Mao Kurumatani, Mitsuteru Asai and Kenjiro Terada:

Application of the finite cover method to elastic-plastic problems and its evaluation

J. Appl. Mech., Vol. 6, pp. 247-256, 2003

DOI: 10.2208/journalam.6.247

Ikumu Watanabe, Kenjiro Terada, Kazumi Matsui, Masayoshi Akiyama and Yutaka Neishi:

Multi-scale analysis for polycrystalline metals

J. Appl. Mech., Vol. 6, pp. 239-246, 2003

DOI: 10.2208/journalam.6.239

Mitsuteru Asai and Kenjiro Terada:

An analysis of propagationg discontinuities by the finite cover method

J. Appl. Mech., Vol. 6, pp. 193-200, 2003

DOI: 10.2208/journalam.6.193

Tateki Ishii, Kenjiro Terada, Takashi Kyoya, Michihiro Yamagishi and Yuji Kishino:

Global-local analysis with interface element using voxel model for local heterogeneous structures

J. Appl. Mech., Vol. 6, pp. 141-150, 2003

DOI: 10.2208/journalam.6.141

Isao Saiki, Shigeri Kanke, Akinori Nakajima and Kenjiro Terada:

Study on multi-scale modeling of plasticity by atomic model

J. Appl. Mech., Vol. 6, pp. 123-130, 2003

DOI: 10.2208/journalam.6.123

Kohei Higuchi, Tetsuo Iwakuma, Takashi Kyoya and Kenjiro Terada:

A finite element of composites in plane strain using an analytic averaging method

J. Appl. Mech., Vol. 6, pp. 107-116, 2003

DOI: 10.2208/journalam.6.107

Kai Oide, Kenjiro Terada and Tsuyoshi Ichimura:

Applicability of dual-Schur mortar method to incompatible meshes with different element sizes and materials

J. Appl. Mech., Vol. 6, pp. 175-184, 2003

DOI: 10.2208/journalam.6.175

Tsuyoshi Ichimura, Muneo Hori, Kenjiro Terada and Takahiro Yamakawa:

Development of prototype of integrated earthquake disaster simulator

J. Appl. Mech., Vol. 6, pp. 615-622, 2003

DOI: 10.2208/journalam.6.615

Tsuyoshi Ichimura, Kai Oide, Kenjiro Terada and Muneo Hori:

Development of dynamic structure analysis method based on multi-scale analysis

J. Appl. Mech., Vol. 5, pp. 535-541, 2002

DOI: 10.2208/journalam.5.535

Kazumi Matsui, Kenjiro Terada, Masayosh Akiyama, Takashi Kuboki, Keiichi Kusaka and Kenji Oikawa:

Influence of the micro-structure of carbon steel on the yield stress and the properties of strain hardening

J. Appl. Mech., Vol. 5, pp. 175-183, 2002

DOI: 10.2208/journalam.5.175

Mitsuteru Asai and Kenjiro Terada:

Multi-scale evaluation method for the strength of heterogeneous brittle materials by means of the material instability theory

J. Appl. Mech., Vol. 5, pp. 217-226, 2002

DOI: 10.2208/journalam.5.217

Kazumi Matsui and Kenjiro Terada:

The multi-scale computation method for elastic-plastic heterogeneous bodies with interfacial debounding

J. Appl. Mech., Vol. 5, pp. 227-234, 2002

DOI: 10.2208/journalam.5.227

Shigeri Kanke, Isao Saiki, Akinori Nakajima, Kenjiro Terada and Kiyohiro Ikeda:

Multi-scale modeling of discrete systems with potential function

J. Appl. Mech., Vol. 5, pp. 167-173, 2002

DOI: 10.2208/journalam.5.167

Mitsuteru Asai, Kenjiro Terada, Kiyohiro Ikeda and Michihiro Yamagishi:

Development of Hybrid-FCM and its application to the analysis of interface fracture in multi-phase materials

J. Appl. Mech., Vol. 4, pp. 85-94, 2001

DOI: 10.2208/journalam.4.85

Ken Ooue, Isao Saiki, Akinori Nakajima and Kenjiro Terada:

Multi-scale modeling for celluar solids with frame element

J. Appl. Mech., Vol. 3, pp. 185-192, 2000

DOI: 10.2208/journalam.3.185

Isao Saiki, Kenjiro Terada, Muneo Hori and Kiyohiro Ikeda:

Estimate of microstructural periodicity in multi-scale modeling for macroscopic material instability based on the block-diagonalization method

J. Appl. Mech., Vol. 3, pp. 37-45, 2000

DOI: 10.2208/journalam.3.37

Takashi Kyoya, Kenjiro Terada, Lizhu Oyang and Hidetoshi Nishioka:

On evaluation of the mechanical property of composite material by the homogenization method

J. Appl. Mech., Vol. 2, pp. 449-458, 1999

DOI: 10.2208/journalam.2.449

Isao Saiki, Kenjiro Terada and Kiyohiro Ikeda:

Micro-scale problems with buckling for multi-scale analyses of cellular solids

J. Appl. Mech., Vol. 2, pp. 287-294, 1999

DOI: 10.2208/journalam.2.287

Tomonori Sugano, Mitsuteru Asai, Kiyohiro Ikeda, Kenjiro Terada and Kenshi Oda:

Stochastic evaluation method for elastic buckling strength of truss structures

J. Appl. Mech., Vol. 2, pp. 37-42, 1999

DOI: 10.2208/journalam.2.37

Katsuyuki Suzuki, Hideomi Ohtsubo, Kenjiro Terada, Seungjae Min, Chuanrong Jin and Katsuyoshi Nakanishi:

The meshless analysis of solid structure using voxel cover

J. Appl. Mech., Vol. 1, pp. 215-222, 1998

DOI: 10.2208/journalam.1.215

Tomoyuki Uo, Kazuo Kashiyama and Kenjiro Terada:

Visco-elastic analysis of asphalt concrete based on homogenization theory using Laplace transform

J. Appl. Mech., Vol. 1, pp. 195-202, 1998

DOI: 10.2208/journalam.1.195

Takashi Kyoya and Kenjiro Terada:

Application of the homogenization method to beam member with periodic structures

J. Appl. Mech., Vol. 1, pp. 185-194, 1998

DOI: 10.2208/journalam.1.185

Kenjiro Terada, Muneo Hori and Takashi Kyoya:

Multi-scale analysis modelling for heterogeneous media

J. Appl. Mech., Vol. 1, pp. 177-184, 1998

DOI: 10.2208/journalam.1.177

Isao Saiki, Shinya Murakami, Ikuo Sano, Kiyohiro Ikeda and Kenjiro Terada:

Image analysis of shear bands on kaolin by bifurcation theory

J. Appl. Mech., Vol. 1, pp. 15-22, 1998

DOI: 10.2208/journalam.1.15

Mayu Muramatsu, Tatsuya Kawada and Kenjiro Terada:

A simulation of ferroelastic phase formation by using phase field model

Key Eng. Mater., Vol. 725, pp. 208-213, 2017

DOI: 10.4028/www.scientific.net/KEM.725.208

Yuichi Shintaku, Mayu Muramatsu, Shinsuke Takase, Seiichiro Tsutsumi and Kenjiro Terada:

Cohesive crack model to reflect local chemical action at grain and its boundaries in polycrystalline metals

QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 33, No. 2, pp. 152s-155s, 2015

DOI: 10.2207/qjjws.33.152s

Seiichiro Tsutsumi, Riccardo Fincato, Kazushi Ueda and Kenjiro Terada:

A crystal plasticity FE analysis considering mechanically induced martensitic phase transformation

QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, Vol. 33, No. 2, pp. 102s-106s, 2015

DOI: 10.2207/qjjws.33.102s

Jae Seok Choi, Jeonghoon Yoo, Shinji Nishiwaki and Kenjiro Terada:

Comparison of homogenization techniques in magnetostatic field problems

Transactions of The Korean Society of Mechanical Engineers A, Vol. 31, pp. 388-394, 2007

DOI: 10.3795/KSME-A.2007.31.3.388

Young Seok Lim, Seungjae Min, Jeonghoon Yoo, Kenjiro Terada and Shinji Nishiwaki:

Comparative studies of topology optimization using continuous approximation of material distribution

Transactions of the Korean Society of Mechanical Engineers - A, Vol. 30, No. 2, pp. 164-170, 2006

URL: http://www.dbpia.co.kr/Article/NODE00670871

Muneo Hori, Tsuyoshi Ichimura and Kenjiro Terada:

On standalization of various earthquake resistance design codes for improving government engineering ability

SOCIOTECHNICA, Vol. 2, pp. 444-454, 2004

DOI: 10.3392/sociotechnica.2.444

Muneo Hori, Tsuyoshi Ichimura and Kenjiro Terada:

On generation and convey of earthquake information for promoting earthquake disaster prevention

SOCIOTECHNICA, Vol. 1, pp. 367-373, 2003

DOI: 10.3392/sociotechnica.1.367

Tsuyoshi Ichimura, Kenjiro Terada, Muneo Hori and Takahiro Yamakawa:

震災情報高度化を目指した統合震災シミュレーター開発のための基礎研究

Proceedings of Japan Conference on Structural Safety and Reliability, Vol. 5, pp. 17-24, 2003

URL: https://jglobal.jst.go.jp/en/detail?JGLOBAL_ID=200902270700230685

Mayu Muramatsu, Haruo Kishimoto, Katsuhiro Yamaji, Keiji Yashiro, Tatsuya Kawada, Kenjiro Terada and Harumi Yokokawa:

Electro-chemical potential analysis of zirconium based on the reaction-diffusion equations of oxygen ion and electron considering phase transformation

ECS Trans., Vol. 68, No. 1, pp. 2363-2372, 2015

DOI: 10.1149/06801.2363ecst

Kenjiro Terada, Tatsuya Kawada, Kazuhisa Sato, Fumitada Iguchi, Keiji Yashiro, Koji Amezawa, Momoji Kubo, Hiroo Yugami, Toshiyuki Hashida, Junichiro Mizusaki, Hideki Watanabe, Takashi Sasagawa and Hiroki Aoyagi:

Multiscale simulation of electro-chemo-mechanical coupling behavior of PEN structure under SOFC operation

ECS Trans., Vol. 35, No. 1, pp. 923-933, 2011

DOI: 10.1149/1.3570073

Mao Kurumatani:

A method of multi-physics multi-scale analysis of deterioration of concrete materials

Proceedings of the Third International Structural Engineering and Construction Conference, pp. 253-260, 2005

Kenjiro Terada and Mitsuteru Asai:

Finite cover method for physically and geometrically nonlinear problems

Proceedings of the Second International Workshop Meshfree Methods for Partial Differential Equations, pp. 169-190, 2004

Ikumu Watanabe and Kenjiro Terada:

Two-scale characterization of deformation-induced anisotropy of polycrystalline metals

Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes, pp. 1595-1600, 2004

Kiho Lee, Motoki Kazama, Eiji Yanagisawa and Kenjiro Terada:

Permeability characteristics of dredged sludges mixed with crushed oyster shells

Proceedings of the International Symposium – IS-Yokohama 2000, pp. 63-66, 2000

Kazumi Matsui, Kenjiro Terada, Takashi Kyoya and Tetsuo Iwakuma:

A priori estimate of macroscopic material responses of heterogeneous elastic-plastic body

Proceedings of the Advances in Computational Engineering and Sciences, pp. 1104-1109, 2000

Naoki Takano, Kenjiro Terada, Masaru Zako and Tomomi Yoshioka:

Microstructural analysis of three-dimensional permeabilities of textile composites by the homogenization theory

Proceedings of the Third Joint Canada-Japan Workshop on Composites, pp. 381-386, 2000

Takashi Kyoya, Kenjiro Terada and Yuji Kishino:

Limit load analysis of rock mass structures combined with a homogenization method

Proceedings of IS-Nagoya, pp. 337-342, 1997

Takashi Kyoya, Kenjiro Terada, Yuji Kishino and Toshikazu Kawamoto:

Stability analysis of rock mass structures based on a homogenization method and a limit load analysis

Proceedings of the Ninth International Conference on Computer Methods and Advances in Geomechanics, pp. 337-342, 1997

Hideomi Ohtsubo, Katsuyuki Suzuki, Kenjiro Terada and Katsuyoshi Nakanishi:

Utilization of finite covers in the manifold method for accuracy control

Proceedings of the Second International Conference on Analysis of Discontinuous Deformation, pp. 317-322, 1997

Kenjiro Terada, Tomohiko Miura and Noboru Kikuchi:

Digital image-based modeling applied to the homogenization analysis of inetermetallic composites

Proceedings of Localized Damage IV, pp. 401-408, 1996

Kenjiro Terada and Noboru Kikuchi:

Elasto-plastic analysis of composite materials by the homogenization method

Proceedings of the Fifth International Symposium on Plasticity and Its Current Applications, pp. 923-926, 1995

Kenjiro Terada and Noboru Kikuchi:

Nonlinear homogenization method for practical applications

American Society of Mechanical Engineers, Applied Mechanics Division, AMD, Vol. 212, pp. 1-16, 1995

URL: https://www.researchgate.net/publication/279600278_Nonlinear_homogenization_method_for_practical_applications

Kenjiro Terada and Noboru Kikuchi:

Nonlinear homogenization method for practical applications

Proceedings of 1995 ASME International Mechanical Engineering Congress and Exposition, pp. 1-16, 1995

山口裕矢, 森口周二, 寺田賢二郎:

固液混合MPMによる地盤構造物の流動化シミュレーション

シミュレーション，財団法人日本シミュレーション学会, Vol. 39, No. 2

URL: https://www.jsst.jp/journal/contents/vol39.html

堤成一郎, Riccardo Fincato, 寺田賢二郎:

結晶塑性と加工誘起マルテンサイト変態を考慮した非線形有限要素解析

溶接学会誌, Vol. 86, No. 6, pp. 443-447, 2017

DOI: 10.2207/jjws.86.443

寺田賢二郎:

均質化法を用いた複合材料の解析 (特集 マルチスケールシミュレーション)

成形加工 = Journal of the Japan Society of Polymer Processing : プラスチック成形加工学会誌, Vol. 29, No. 2, pp. 42-46, 2017

URL: https://ci.nii.ac.jp/naid/40021083035

寺田賢二郎:

計算力学における非線形シミュレーションの研究動向

Mech D&A News, Mechanical Design & Analysis Co., Vol. 2016, pp. 1-12, 2016

寺田賢二郎, 村松眞由:

結晶塑性モデルによるDP鋼の成形限界特性評価 (特集 材料科学におけるシミュレーション技術の活用)

金属, Vol. 85, No. 11, pp. 908-914, 2015

URL: https://ci.nii.ac.jp/naid/40020630021

寺田賢二郎:

非線形CAEの研究動向と材料モデリング

Mech D&A News, Mechanical Design & Analysis Co., Vol. 2010-1, pp. 1-7, 2010

寺田賢二郎:

CAEソフトウェアから力学を学ぶ「数値実験による設計とCAEの力学講座」

サイバネットシステム株式会社, No. 131, pp. 22-23, 2010

平山紀夫, 寺田賢二郎:

数値材料試験による異方性非線形材料特性の算出（1）

CAEのあるものづくり，サイバネットシステム, Vol. 10, pp. 10-12, 2009

URL: http://www.cybernet.co.jp/ansys/download/mn/200903/mcmnp200903-0006.html

寺田賢二郎, 平山紀夫:

数値材料試験による異方性非線形材料特性の算出（2）

CAEのあるものづくり，サイバネットシステム, Vol. 11, pp. 10-13, 2009

URL: http://www.cybernet.co.jp/ansys/download/mn/200909/mcmnp200909-0014.html

寺田賢二郎:

鉄鋼材料の微視的非均質性と巨視的機械的性質の相互関係の理解

塑性と加工, Vol. 49, No. 564, pp. 13-18, 2008

DOI: 10.9773/sosei.49.13

平山紀夫, 寺田賢二郎:

数値材料試験による異方性非線形材料特性の算出～Hillの異方性塑性パラメーターの同定～

CAEのあるものづくり，サイバネットシステム, Vol. 9, pp. 12-14, 2008

URL: http://www.cybernet.co.jp/ansys/product/lineup/multiscale/relation/mono009.html

寺田賢二郎:

複合材料の数値材料実験のススメ(その1)等価物性と均質化法

強化プラスチックス, Vol. 53, No. 4, pp. 205-210, 2007

URL: https://ci.nii.ac.jp/naid/40015446349

寺田賢二郎:

複合材料の数値材料実験のススメ(その2)数値材料実験の理論と実際:線形弾性体編

強化プラスチックス, Vol. 53, No. 5, pp. 246-252, 2007

URL: https://ci.nii.ac.jp/naid/40015484782

寺田賢二郎:

複合材料の数値材料実験のススメ(その3)数値材料実験の理論と実際:伝熱と浸透流編

強化プラスチックス, Vol. 53, No. 6, pp. 277-286, 2007

URL: https://ci.nii.ac.jp/naid/40015527413

寺田賢二郎:

ANSYSを利用したマルチスケールCAE～ANSYSを利用した数値材料試験～

CAEのあるものづくり，サイバネットシステム, Vol. 5, pp. 9-10, 2006

URL: http://www.cybernet.co.jp/ansys/product/lineup/multiscale/relation/mono005.html

寺田賢二郎:

均質化法とその工学的応用 : ミクロとマクロのCAEツールとして(計算力学・工学におけるマルチスケールモデリング,<特集>理学と工学,科学と技術をつなぐマルチスケールモデリング)

日本機械学会誌, Vol. 108, No. 1043, pp. 802-804, 2005

DOI: 10.1299/jsmemag.108.1043_802

寺田賢二郎:

3・5 マルチスケール解析(3.計算力学,<特集>機械工学年鑑)

日本機械学会誌, Vol. 107, No. 1029, pp. 592, 2004

DOI: 10.1299/jsmemag.107.1029_592_1

堀宗朗, 寺田賢二郎, 京谷孝史, 金子賢治:

土の構造とメカニックス-ミクロからマクロへ : 5. 地盤力学におけるマイクロメカニックスとマクロメカニックスの関係(その2)

土と基礎 = Soil mechanics and foundation engineering, Vol. 51, No. 1, pp. 31-36, 2003

URL: https://ci.nii.ac.jp/naid/110003889710

寺田賢二郎:

ミクロからマクロを予測する(<特集>計算力学の最前線)

土木学会誌, Vol. 88, No. 8, pp. 23-24, 2003

URL: https://www.jsce.or.jp/journal/thismonth/200308/index.htm

寺田賢二郎:

有限要素法の一般化と有限被覆法(<特集>fixed gridによる数値解析)

計算工学会誌, Vol. 8, No. 4, pp. 783-787, 2003

URL: https://www.jsces.org/activity/journal/2003.html

斉木功, 寺田賢二郎:

非均質構造材料のマルチスケールモデリング(<特集>マルチスケール法)

計算工学会誌, Vol. 6, No. 4, pp. 361-363, 2001

URL: https://www.jsces.org/activity/journal/2001.html

寺田賢二郎:

企画趣旨(<特集>マルチスケール法)

計算工学会誌, Vol. 6, No. 4, pp. 360, 2001

URL: https://www.jsces.org/activity/journal/2001.html

寺田賢二郎:

計算力学のエッセンス -有限要素法を中心として-

土木学会誌, Vol. 85, No. 8, pp. 30-34, 2000

URL: https://www.jsce.or.jp/journal/thismonth/200008.htm

Plenary Speaker: Recent advances in FEMs and MPMs for Disaster Simulations

Kenjiro Terada, Shuji Moriguchi, Yuya Yamaguchi and Shun Suzuki

XVI International Conference on Computational Plasticity. Fundamentals and Applications - COMPLAS 2021, Barcelona, Spain(Online), September 7-10, 2021

Invited Speaker: PCA-based computational homogenization for nonlinear elasticity

Ryo Hatano, Seishiro Matsubara, Shuji Moriguchi and Kenjiro Terada

Computational Modeling of Complex Materials across the Scales (CMCS), Glasgow, UK, October, 2019

Invited Speaker: Two-scale viscoelastic analysis of FRP in consideration of dependence of resin's properties on degree of cure

Risa Saito, Yuya Yamaguchi, Shuji Moriguchi, Yasuko Mihara, Takaya Kobayashi and Kenjiro Terada

The Future of Materials Engineering - Dramatic Innovation to the next 100 years, International Symposium, Rutsubo Hall & Department of Materials Science, Aobayama Campus, Tohoku University, Sendai, Japan, June, 2019

Invited Lecture: Multi-scale and multi-physics simulations for heterogenous materials and structures

The Art of Modeling in Computational Solid Mechanics, Centre International des Sciences and Méchanques (CISM), Udine, Italy, October, 2019

Plenary Speaker: Exploration of predictive disaster simulations by FEM and MPM

Yuya Yamaguchi, Shun Suzuki, Shuji Moriguchi and Kenjiro Terada

XV International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS 2019), Barcelona, Spain, September, 2019

Semi-Plenary Speaker: Simulations of multi-stage failure phenomena in slope disasters

Kenjiro Terada, Shuji Moriguchi, Shun Suzuki and Yuya Yamaguchi

6th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) (ECCM 6) and the 7th European Conference on Computational Fluid Dynamics (ECFD 7), Glasgow, UK, June, 2018

Plenary Speaker: Enhancing microstructural analyses in computational homogenization

Kenjiro Terada, Seishiro Matsubara, Shinnosuke Nishi, Masayasu Kishi and Mayu Muramatsu

ECCOMAS Thematic Conference on Computational modeling of Complex Materials across the Scales (CMCS 2017), Paris, France, November, 2017

Plenary Speaker: Two-scale characterization of fiber-reinforced polymers with self-heating effect

Kenjiro Terada, Seishiro Matsubara, Masayasu Kishi and Mayu Muramatsu

XIV International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS XIII), Technical University of Catalonia (UPC), Vertex Building, Barcelona, Spain, September, 2017

Invited Speaker: Numerical plate testing for composite plates

Kenjiro Terada, Norio Hirayama, Koji Yamamoto and Seishiro Matsubara

EUROMECH Colloquium 559 "Multi‐scale computational methods for bridging scales in materials and structures", Eindhoven, The Netherlands, February, 2015

Keynote Speaker: Two-scale analysis of composite plates with in-plane periodic heterogeneities

Kenjiro Terada, Seishiro Matsubara and Norio Hirayama

1st Pan-American Congresses on Computational Mechanics- PANACM, Buenos Aires, Argentina, April, 2015

Plenary Speaker: Numerical material and plate tests: advantages and challenges

Kenjiro Terada, Seishiro Matsubara and Shinnosuke Nishi

XIII International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS XIII), Technical University of Catalonia (UPC), Vertex Building, Barcelona, Spain, September, 2015

Plenary Speaker: Multi-scale computations diversified: From material to disaster sciences

Kenjiro Terada, Shinsuke Takase, Junji Kato, Shuji Moriguchi and Takashi Kyoya

11th World Congress on Computational Mechanics (WCCM XI) combined with 5th. European Conference on Computational Mechanics (ECCM V) and 6th. European Conference on Computational Fluid Dynamics (ECFD VI), Barcelona, Spain, July, 2014

Plenary Speaker: Computational electro-chemo-mechanics for solids deteriorating at multiple scales

XII th International Conference on Computational Plasticity (COMPLAS XII) -Fundamentals and Applications-, Barcelona, Spain, September, 2013

Keynote Speaker: Two-scale thermo-electro-chemo-mechanical modeling for durability assessment of SOFC

Euromech Colloquium 537 "Multiscale computational homogenization of heterogeneous structures and materials", Marne-la-Vallée, France, March, 2012

Plenary Speaker: Characterization of electro-chemo-mechanical deterioration of cermets under SOFC operation

XI th International Conference on Computational Plasticity (COMPLAS XI) -Fundamentals and Applications-, Barcelona, Spain, September, 2011

AIMM Keynote Speaker: Multiscale computational assessment for mechanical deterioration of solid-oxide fuel cell (SOFC)

9th World Congress on Computational Mechanics (in conjunction with the 4th Asian Pacific Congress on Computational Mechanics) (WCCM/APCOM 2010), Sydney, Australia, July, 2010

Semi-Plenary Speaker: Modeling and analysis of macroscopic mechanical deterioration due to time-varying microstructures

IV European Conference on Computational Mechanics (ECCM 2010) -Solids, Structures and Coupled Problems in Engineering-, Palais des Congres, France, May, 2010

Invited Speaker: Numerical material testing for strength evaluation of polycrystalline metals

4th International Conference on Multiscale Materials Modeling (MMM-2008), Tallahassee, Florida, USA, November, 2008

Keynote Speaker: Two-scale finite element analysis for deformation-induced anisotropy of polycrystalline metals

International Conference on Computational Methods (ICCM2004), Singapore, Singapore, November, 2004

Invited Speaker: Finite cover method for physically and geometrically nonlinear problems

Second International Workshop Meshfree Methods for Partial Differential Equations, Bonn, Germany, September, 2003

Invited Speaker:CPFモデルとMPMによる材料と構造物の破壊シミュレーション

国際粉体工業展大阪2021【最新情報フォーラム】ものづくりにおけるDX推進：粉体シミュレーションの活用, インテックス大阪, 大阪, 2021.October 13

Keynote Speaker:計算力学分野における研究動向と今後の課題

シミュレーション・フェスタ～ （2019 SIMULIA Community Conference Japan）, ベルサール東京日本橋, 東京, 2019.October 29-30

Keynote Speaker:非線形計算力学の現状・課題と今後

第12回 メカニカルデザインセミナー（Mechanical Design 2019）, 関東ITソフトウェア健康保険組合・山王健保会館, 東京, 2019.July 2

Keynote Speaker: 計算力学の研究動向と産学連携CAE

CAEユニバーシティ特別公開フォーラム 2018, 富士ソフトビル, 東京, August, 2018

Invited Speaker: 繊維強化複合材料のミクロ構造に対するアイソジオメトリック接触・摩擦解析と時空間均質化

第21回応用力学シンポジウム, 名城大学天白キャンパス, 名古屋, May, 2018

Keynote Speaker: 計算力学における非線形シミュレーションの研究動向

第9回メカニカルデザインユーザー会, メカニカルデザイン, 山王健保会館, 東京, January, 2016

Keynote Speaker: FEMの発展の経緯と現状分析を踏まえたCAEへのアプローチ

CAEユニバーシティ特別公開フォーラム 2015, 富士ソフトビル, 東京, August, 2015

Keynote Speaker: 非線形CAEの研究動向と材料モデリング

第3回メカニカルデザインユーザー会, メカニカルデザイン, 東京コンファレンスセンター, 東京, July, 2010

Keynote Speaker: マルチスケール解析手法 －材料レベルと構造レベルのアプローチ－

非線形解析フォーラム2006, ニュートンワークス, 東京, November, 2006

Keynote Speaker: 使用環境を考慮した非線形均質化法による非均質材料のマクロ物性予測

第18回計算力学講演会, オーガナイズドセッション「材料の組織・強度に関するマルチスケールアナリシス」, 筑波大学, つくば, November, 2005

Keynote Speaker: マルチスケールCAEの可能性 －材料と構造の非線形ミクロ-マクロ連成モデリング－

非線形解析フォーラム2005, ニュートンワークス, 東京, November, 2005

Invited Speaker: 均質化法に基づく多結晶塑性モデリング

2005年度日本機械学会年次大会, 電気通信大学, 東京, September, 2005

Honor Speaker: Visual Seismic Hazard（震災の見える化）

定例宮城県沖地震シンポジウム（第3回）, 宮城県沖地震対策研究協議会, 仙台, March, 2005

Invited Speaker: 均質化法に基づく非線形マルチスケール解析 －現状と課題－

第6回計算数理工学フォーラム, 日本計算数理工学会, 千葉大西千葉キャンパス, 千葉, March, 2004

Honor Speaker: 均質化理論に基づくマルチスケールモデリングとその各種非線形非均質材料への適用

日本材料学会北陸信越支部 特別講演会, 日本材料学会, 信州大学工学部, 長野, March, 2001

Invited Speaker: 均質化理論のマルチスケール解析の各種非線形問題への展開

第13回計算力学講演会, フォーラム「不均質体・複合材の階層モデリング手法の最前線」, 日本機械学会, 豊橋技術科学大学, 豊橋, November, 2000

Outstanding Paper Award 2020 (JSCES)

Awarded Paper: Tsunami risk assessment using spatial modes extracted from results of numerical analysis, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2020, p.20200003, 2020

URL: https://www.jsces.org/award/index.html

Achievement Award 2020（JSCES）

Kenjiro Terada, 2020

URL: https://www.jsces.org/award/index.html

JSME Medal for Outstanding Paper - 2018

Awarded Paper: Seishiro Matsubara and Kenjiro Terada: Rheological constitutive model for thermoplastic resin based on viscoplastic-viscoelastic multiplicative decomposition of deformation gradient, Journal of the Society of Mechanical Engineers, Vol. 82, No. 839, p. 16-00060, 2016

Outstanding Paper: Awards for Excellence - 2018

Awarded Paper: Mayu Muramatsu, Keiji Yashiro, Tatsuya Kawada and Kenjiro Terada: Numerical simulations of non-stationary distributions of electrochemical potentials in SOFC, Engineering Computations, Vol. 6, No. 34, pp. 1956-1988, 2017

Outstanding Paper Award 2015 (JSCES)

Awarded Paper: Junji Kato, Hiroya Hoshiba, Shinsuke Takase, Kenjiro Terada and Takashi Kyoya: Accuracy validation of analytical sensitivity in topology optimization for elastoplastic composites, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2014, p.20140012, 2014

URL: https://jsces.org/award/archive.html#list2015

IACM Fellows Award 2014 (IACM)

Kenjiro Terada, 2014

Kawai Medal 2013 (JSCES)

Kenjiro Terada, 2013

URL: https://jsces.org/award/archive.html#list2013

Outstanding Paper Award 2013 (JSCES)

Awarded Paper: Mao Kurumatani, Terada Kenjiro, Junji Kato, Takashi Kyoya and Kazuo Kashiyama: An isotropic damage model based on fracture mechanics for concrete and its evaluation, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2013, p.20130015, 2013

URL: https://jsces.org/award/archive.html#list2013

Computational Mechanics Achievement Award 2007

Kenjiro Terada, 2007

URL: https://jsme.or.jp/cmd/japanese/award/index.html

Outstanding Paper Award 2006 (JSCES)

Awarded Paper: Mao Kurumatani and Terada Kenjiro: Finite cover method with multi-cover modeling -Fracture simulation of quasi-brittle heterogeneous solids-, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2006, p.20060029, 2006

URL: https://jsces.org/award/archive.html#list2006

Outstanding Paper Award 2002 (JSCES)

Awarded Paper: Kenjiro Terada, Isao Saiki and Kazumi Matsui: Kinematically correct formulation for two-scale finite deformation problems, Transactions of the Japan Society for Computational Engineering and Science, Vol. 2000, p.20000006, 2000

URL: https://jsces.org/award/archive.html#list2002